University of Sydney Handbooks - 2016 Archive

Download full 2016 archive Page archived at: Fri, 13 May 2016 14:40:30 +1000

Unit of study descriptions

Master of Engineering majoring in Civil Engineering

To meet requirements for the Master of Engineering majoring in Civil Engineering a candidate will complete 72 credit points as listed in the unit of study table including:
(a) 24 credit points of Core units
(b) 24 credit points of Specialist units
(c) A minimum of 12 credit points of Research units
(d) A maximum of 12 credit points of Elective units
Candidates who have been granted 24 credit points of Reduced Volume Learning (RVL), must complete 48 credit points including:
(a) A minimum of 12 credit points of Core units
(b) A minimum of 12 credit points of Specialist units
(c) A minimum of 12 credit points of Research units
(d) Elective units are not available for candidates with RVL

Core units

Candidates must complete 24 credit points of Core units.
Where Reduced Volume Learning has been granted candidates must complete a minimum of 12 credit points of Core units.
ENGG5102 Entrepreneurship for Engineers

Credit points: 6 Teacher/Coordinator: Dr Dylan Lu Session: Semester 1 Classes: Lecture 2 hrs/week; Tutorial 2 hrs/week. Prohibitions: ELEC5701 Assumed knowledge: Some limited industry experience is preferred but not a must. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit of study aims to introduce graduate engineering students from all disciplines to the concepts and practices of entrepreneurial thinking. Introduction to Entrepreneurship will offer the foundation for leaders of tomorrow's high-tech companies, by providing the knowledge and skills important to the creation and leadership of entrepreneurial ventures. The focus of the unit of study is on how to launch, lead and manage a viable business starting with concept validation to commercialisation and successful business formation.
The following topics are covered: Entrepreneurship: Turning Ideas into Reality, Building the Business Plan, Creating a Successful Financial Plan, Project planning and resource management, Budgeting and managing cash flow, Marketing and advertising strategies, E-Commerce and Entrepreneurship, Procurement Management Strategies, The Legal Environment: Business Law and Government Regulation, Intellectual property: inventions, patents and copyright, Workplace, workforce and employment topics, Conflict resolution and working relationships, Ethics and Social Responsibility.
Assumed knowledge: Some limited industry experience is preferred but not a must.
ENGG5202 Sustainable Design, Eng and Mgt

Credit points: 6 Teacher/Coordinator: Prof Tony Vassallo Session: Semester 1 Classes: Lecture 2 hrs/week; Tutorial 2 hrs/week. Assumed knowledge: General knowledge in science and calculus and understanding of basic principles of chemistry, physics and mechanics Assessment: Through semester assessment (70%) and Final Exam (30%) Mode of delivery: Normal (lecture/lab/tutorial) day
The aim of this UoS is to give students an insight and understanding of the environmental and sustainability challenges that Australia and the planet are facing and how these have given rise to the practice of Sustainable Design, Engineering and Management. The objective of this course is to provide a comprehensive overview of the nature and causes of the major environmental problems facing our planet, with a particular focus on energy and water, and how engineering is addressing these challenges.
The course starts with a description of the physical basis of global warming, and proceeds with a discussion of Australia`s energy and water use, an overview of sustainable energy and water technologies and sustainable building design. Topics include the principles of sustainability, sustainable design and social responsibility, sustainable and renewable energy sources, and sustainable use of water. Aspects of designing a sustainable building, technologies that minimise energy and water consumption, consider recycling and reducing waste disposal using advanced design will also be discussed during this course.
ENGG5103 Safety Systems and Risk Analysis

Credit points: 6 Teacher/Coordinator: Dr Rod Fiford Session: Semester 2 Classes: Lecture 2 hrs/week; Tutorial 2 hrs/week. Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day
To develop an understanding of principles of safety systems management and risk management, as applied to engineering systems. AS/NZS 4801:2001 and 4804:2001 form the foundation for teaching methods of developing, implementing, monitoring and improving a safety management system in an Engineering context.
Students will be exposed to a number of case studies related to safety systems and on completion of the course be able to develop a safety management plan for an Engineering facility that meets the requirements of NSW legislation and Australian standards for Occupational Health and Safety management systems.
Students are introduced to a variety of risk management approaches used by industry, and methods to quantify and estimate the consequences and probabilities of risks occurring, as applied to realistic industrial scenarios.
PMGT5871 Project Process Planning and Control

Credit points: 6 Teacher/Coordinator: Dr John Flynn, Dr Mahendrarajah Piraveenan, Julia Chechia Session: Intensive December,Intensive July,Semester 1,Semester 2 Classes: Lecture 2 hrs/week; Tutorial 1 hr/week. May also be offered online and/or in block mode. Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Online
Project Management processes are what moves the project from initiation through all its phases to a successful conclusion. This course takes the project manager from a detailed understanding of process modelling through to the development and implementation of management processes applicable to various project types and industries and covers approaches to reviewing, monitoring and improving these processes.
Textbooks
Jeffrey K. Pinto/Project Management: Achieving Competitive Advantage/3rd edition/2012/9780132664158// Kathy Schwalbe/Information Technology Project Management/Sixth Edition//

Specialist units

Candidates must complete 24 credit points of Specialist units, but may take additional units as Electives.
Where Reduced Volume Learning has been granted candidates must complete a minimum of 12 credit points of Specialist units.
Exchange units may be taken as Specialist units with the approval of the Program Director.
CHNG5005 Wastewater Engineering

Credit points: 6 Teacher/Coordinator: A/Prof Geoff Barton Session: Semester 1 Classes: Lecture 2 hrs/week; Tutorial 1 hr/week; Group assignment 2 hrs/week; Site Visit 5 hrs/week. Assumed knowledge: Ability to conduct mass and energy balances, and the integration of these concepts to solve 'real' chemical engineering problems. Ability to understand basic principles of physical chemistry, physics and mechanics. Ability to use basic calculus and linear algebra, and carry out such computations using Matlab and MS Excel. Ability to read widely outside of the technical literature and to synthesise arguments based on such literature. Ability to write coherent reports and essays based on information from diverse sources. Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
The unit aims to acquaint students with the application of chemical engineering concepts and practice in an environmental context, the important example of wastewater treatment will be explored.
The key issues that will be considered are: Wastewater creation and characterisation; Wastewater treatment costs; Primary, secondary and tertiary treatment options; High-rate anaerobic and aerobic treatment options; Sludge management and water recovery/reuse options; Process integration considerations.
By the end of this UOS, a student should have gained an engineering-based appreciation of the technical, economic and social challenges posed by wastewater generation and its cost-effective treatment.
This UoS is an advanced elective in chemical engineering. The concepts and enabling technologies taught here are relevant to the real-world practice of chemical engineering across a broad range of industries.
CIVL5458 Numerical Methods in Civil Engineering

Credit points: 6 Teacher/Coordinator: Dr Fernando Alonso-Marroquin Session: Semester 1 Classes: Lecture 2 hrs/week; Tutorial 2 hrs/week. Assessment: Through semester assessment (70%) and Final Exam (30%) Mode of delivery: Normal (lecture/lab/tutorial) day
Objectives:
The objective of this unit is to provide students with fundamental knowledge of finite element analysis and how to apply this knowledge to the solution of civil engineering problems at intermediate and advanced levels.
At the end of this unit, students should acquire knowledge of methods of formulating finite element equations, basic element types, the use of finite element methods for solving problems in structural, geotechnical and continuum analysis and the use of finite element software packages. The syllabus comprises introduction to finite element theory, analysis of bars, beams and columns, and assemblages of these structural elements; analysis of elastic continua; problems of plane strain, plane stress and axial symmetry; use, testing and validation of finite element software packages; and extensions to apply this knowledge to problems encountered in engineering practice.
Outcomes:
On completion of this unit, students will have gained the following knowledge and skills:
1. Knowledge of methods of formulating finite element equations. This will provide students with an insight into the principles at the basis of the FE elements available in commercial FE software.
2. Knowledge of basic element types. Students will be able to evaluate the adequacy of different elements in providing accurate and reliable results.
3. Knowledge of the use of finite element methods for solving problems in structural and geotechnical engineering applications. Students will be exposed to some applications to enable them to gain familiarity with FE analyses.
4. Knowledge of the use of finite element programming and modeling.
5. Extended knowledge of the application of FE to solve civil engineering problems.
Textbooks
Fernando Alonso-Marroquin/Finite Element Modelling for Civil Engineering/3rd/2015//
CIVL5668 Wind Engineering for Design-Fundamentals

Credit points: 6 Teacher/Coordinator: Prof John Patterson, Dr Graeme Wood Session: Semester 1 Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day
Objectives:
This unit of study will introduce the fundamentals of meteorology governing wind flow, details of extreme wind events, wind structure, statistical distribution of the wind, the effect of topography and terrain changes on wind profile, investigate the fluid flow around bluff bodies, and detail the design of civil engineering structures for wind loading.
Outcomes:
This Unit will provide students with the following knowledge and skills:
On completion of this course students will have an understanding of the governing principles of wind engineering, how to predict the extreme wind speed and analyse anemographs, predict the effect of terrain and topography on velocity and turbulence, understand flow patterns around bodies, how to predict the pressure distribution and wind loading on bodies and structures, dynamic response of structures, and how all the above relates to AS1170.2.
Textbooks
Australian New Zealand Standard/Structural Design Actions Part 2: Wind Actions// Australian New Zealand Standard/Structural Design Action - wind actions - commentary (supplement to AS/NZS 1170.2:2002)//
CIVL6257 Concrete Structures - Prestressed Concrete

Credit points: 6 Teacher/Coordinator: Prof Kim Rasmussen Session: Semester 1 Classes: Lecture(2.00 hours per week), Project Work - in class(1.00 hours per week), Project Work - own time(3.00 hours per week), Prohibitions: CIVL5257 Assessment: Exam/Quiz (In Session) 25%, Calculation Exercise 35%, Exam (Final) 40% Mode of delivery: Normal (lecture/lab/tutorial) day
To develop an advanced understanding of the behaviour, analysis and design of prestressed concrete structures. Outcomes: Students will develop skills in the analysis and design of prestressed concrete beams, columns and slabs, to satisfy the serviceability and strength provisions of the Australian Concrete Structures Standard. Syllabus Summary: The behaviour and design of prestressed concrete structures and structural elements including beams, columns and slabs. Topics covered will include steel and concrete materials, prestress losses, flexural and shear behaviour at service loads and ultimate loads, short and long term deflections, load balancing, anchorage zones (including strut and tie modelling of anchors), dynamic response of post-tensioned floors, and sustainability considerations for prestressed concrete structures.
CIVL6264 Composite Steel-Concrete Structures

Credit points: 6 Teacher/Coordinator: Dr Gianluca Ranzi Session: Semester 2 Classes: Lecture(2.00 hours per week), Tutorial(1.00 hours per week), Independent Study(3.00 hours per week), Prohibitions: CIVL5264 Assessment: Exam/Quiz (In Session) 60%, Calculation Exercise 40% Mode of delivery: Normal (lecture/lab/tutorial) day
Students will understand the basic principles for the design of composite steel-concrete structures. In particular, they will develop an understanding of the procedures required for the design of composite beams, slabs and columns. Design guidelines will reflect requirements of the Australian Standards and international codes.
CIVL6267 Steel Structures - Adv Analysis and Design

Credit points: 6 Teacher/Coordinator: Prof Kim Rasmussen Session: Semester 1 Classes: Lecture(2.00 hours per week), Tutorial(1.00 hours per week), Independent Study(6.00 hours per week), Prohibitions: CIVL5267 Assessment: Calculation Exercise 50%, Exam (Final) 50% Mode of delivery: Normal (lecture/lab/tutorial) day
This Unit covers the advanced principles of the design of hot-rolled and cold-formed steel structural members and connections. Reference is made to the Australian Standards AS4100 and AS/NZS4600 as well as international standards, explaining the underlying theory for the provisions of these standards. The objectives are to provide students with advanced knowledge of steel structural design and confidence to apply the underlying principles to solve a wide range of structural steel problems. Outcomes: This Unit will provide students with the following knowledge and skills: - An understanding of the basic principles of reliability based design on steel structures. - An understanding of the relationship between structural analysis and design provisions. - An understanding of the background to the design provisions for hot-rolled and cold-formed steel structures, including the main differences between them. - Proficiency in applying the provisions of AS4100, AS/NZS4600, AISC-LRFD, Eurocode3 - Part 1.1 and GB50017 for columns, beams, beam-columns and connections. Syllabus Summary: Limit states design philosophy and approaches, Loading standards, Methods of analysis, Flexural members section and member capacity, Compression members section and member capacity, Beam-column member and section capacity, Interrelationship between analysis and design, Pinned (shear) and rigid (moment) connections.
Textbooks
Greg Hancock & Kim Rasmussen/Advanced Structural Steel Design (lecture notes)/ --
CIVL6268 Structural Dynamics

Credit points: 6 Teacher/Coordinator: Dr Hao Zhang Session: Semester 2 Classes: Lecture(2.00 hours per week), Tutorial(1.00 hours per week), Independent Study(4.00 hours per week), Prohibitions: CIVL5268 Assumed knowledge: Students are assumed to have a good knowledge of fundamental structural analysis, which is covered in the courses of Structural Mechanics,Introduction to Structural Concepts and Design, Structural Analysis, and Finite Element Analysis. Assessment: Calculation Exercise 35%, Exam/Quiz (In Session) 30%, Exam (Final) 35% Mode of delivery: Normal (lecture/lab/tutorial) day
This Unit introduces the fundamental concepts and theory of dynamic analysis. In a first step, free vibrations are studied and the problem of determining the natural frequency of a system is addressed. This is followed by the study of harmonically excited vibrations. While initially systems with a single degree of freedom (SDOF) are considered, the theory is generalized to cover multi-degree of freedom systems. The theory is applied to explain how structures are designed against earthquake actions with specific reference to Parts4 of the Australian loading standard AS1170 for determining earthquake loads. Outcomes: This Unit will provide students with the following knowledge and skills: Understanding of the fundamental concepts and definitions used in structural dynamics. Ability to calculate the natural frequency of a system using equilibrium or energy methods. Ability to determine the effect of viscous damping on the response of a freely vibrating system. Ability to determine the response of a system to a harmonic excitation. Ability to apply AS1170 Part 4 in structural design against earthquake actions. Understanding of the fundamental concepts of earthquake engineering.
Textbooks
Hancock, J.G./Dynamic Structural Analysis/1996/ -- Australian New Zealand Standard/Structural Design Actions Part 4: Earthquake Actions/ --
CIVL6450 Analysis and Design of Pile Foundations

Credit points: 6 Teacher/Coordinator: Prof David Airey Session: Semester 1 Classes: Lecture(3.00 hours per week), Project Work - own time(6.00 hours per week), Laboratory(3.00 hours per week), Prohibitions: CIVL5450 Assessment: Exam/Quiz (In Session) 40%, Writing - Technical 60% Mode of delivery: Normal (lecture/lab/tutorial) day
To develop an understanding of the modern principles of design of pile foundations and the application of those principles to practice. Outcomes: Students should gain an advanced understanding of the types of pile foundations used in practice, and the procedures for analysis of pile foundations under various types of loading, and gain experience in carrying out pile design for real geotechnical profiles. Syllabus summary: Types of piles and their uses, effects of pile installation, axial capacity of piles and pile groups, settlement of pile foundations, ultimate lateral capacity, lateral deformations, analysis of pile groups subjected to general loading conditions, piled raft foundations, piles subjected to ground movements, pile load testing, code provisions for pile design.
Textbooks
Poulos, H.G and Davis, E.H./Pile Foundations/1983/ --
CIVL6452 Foundation Engineering

Credit points: 6 Teacher/Coordinator: Prof David Airey Session: Semester 1 Classes: Project Work - in class(3.00 hours per week), Lecture(2.00 hours per week), Independent Study(5.00 hours per week), Tutorial(2.00 hours per week), Prohibitions: CIVL5452 Assumed knowledge: CIVL2410 AND CIVL3411. Students are assumed to have a good knowledge of fundamental soil mechanics, which is covered in the courses of soil mechanics (settlement, water flow, soil strength) and foundation engineering (soil models, stability analyses; slope stability; retaining walls; foundation capacity) Assessment: Exam/Quiz (In Session) 40%, Writing - Technical 20%, Calculation Exercise 40%, Design Product 0% Mode of delivery: Normal (lecture/lab/tutorial) day
The objectives of this unit are to gain an understanding of the design process in foundation engineering, to understand the importance of site investigation and field testing, and to learn how to deal with uncertainty. To achieve these objectives students are asked to design foundations using real data. Students will develop the ability to interpret the results of a site investigation; to use laboratory and field data to design simple foundations; develop an appreciation of the interaction between the soil, foundation system and the supported structure. The syllabus is comprised of field testing, site characterisation, interpretation of field data, design pof pile raft and surface footings, support of excavations, soil improvement, and geotechnical report writing.
CIVL6454 Rock Engineering

Credit points: 6 Teacher/Coordinator: Prof David Airey Session: Semester 2 Classes: Project Work - in class(3.00 hours per week), Independent Study(6.00 hours per week), Laboratory(3.00 hours per week), Prohibitions: CIVL5454 Assumed knowledge: Undergraduate geology and soil mechanics. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Objectives: to develop an understanding of the behaviour and design of engineering structures in rock masses. Outcomes: Students will have learnt how to classify and characterise rocks and rock masses for engineering purposes and developed an understanding of basic rock mechanics. Etc. Syllabus summary: Introduction to rock mechanics and rock engineering. Index properties and engineering characterisation of rocks and rock masses. Planes of weakness in rock masses. Rock material strength and rock mass strength. Rock deformability. In situ stress conditions in rock masses. Underground openings. Rock slopes.
Textbooks
Bieniawski, Z/Rock Mechanics Design in Mining and Tuneling/1984// Brady, B.H.G. and Brown, E.T/Rock Mechanics for Underground Mining/1985// Hoek, E. and Brady, J./Rock Slope Engineering/3rd/1981// Hoek, E. and Brown, E.T./Underground Excavations in Rock/1980//
CIVL6455 Engineering Behaviour of Soils

Credit points: 6 Teacher/Coordinator: Prof David Airey Session: Semester 2 Classes: Lecture (2.00 hours per week), Laboratory(3.00 hours per week), Tutorial (1.00 hours per week), Independent Study (4.00 hours per week), Prohibitions: CIVL5455 Assumed knowledge: CIVL2410 AND CIVL3411. A knowledge of basic concepts and terminology of soil mechanics is assumed. Experience with geotechnical practice in estimating parameters from field and laboratory data would be useful but not essential. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
The objective of the course is to provide an introduction to the critical state framework. This framework is used for the basis for developing an understanding of the stress, strain, strength behaviour of all soils, and is used to present a rational approach to the selection of parameters for use in geotechnical design.
CIVL6666 Open Channel Flow and Hydraulic Structures

Credit points: 6 Teacher/Coordinator: Prof John Patterson Session: Semester 1 Prohibitions: CIVL5666 Assumed knowledge: Advanced knowledge of fluid mechanics is necessary for this UoS Assessment: Design Product 70%, Exam/Quiz (In Session) 20%, Writing - Technical 10% Mode of delivery: Normal (lecture/lab/tutorial) day
This unit of study will review the principles of uniform flow in open channels. These will be extended into a study of the principles of slowly varying and rapidly varying flow, the calculation of backwater curves and hydraulic jumps. These principles will then be applied to the design of gutters, inlets, culverts and piers, using existing commercially available software packages commonly used in engineering practice. Outcomes: This Unit will provide students with a strong back ground in open channel flow hydraulics, and the basis for the calculation of stream and hydraulic structure performance. Students will gain experience in the use of currently available commercial software for the design of culverts and other structures.
Textbooks
Sturm, T.W./Open Channel Flow/2001/ --
CIVL6669 Applied Fluid Engineering Computing

Credit points: 6 Teacher/Coordinator: A/Prof Chengwang Lei Session: Semester 2 Classes: Lecture(1.00 hours per week), Tutorial(1.00 hours per week), Laboratory(2.00 hours per week), Independent Study(6.00 hours per week), Prohibitions: CIVL5669 Assumed knowledge: CIVL5511 OR CIVL9612. Understanding of fluid mechanics at the undergraduate level; Appreciation of fluid flow problems relevant to Civil and Environmental Engineering applications; Basic computer skills and some understanding of numerical methods. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
The objective of this unit is to provide students with advanced knowledge of Computational Fluid Dynamics (CFD) techniques and skills in solving thermal fluid flow problems relevant to Civil and Environmental Engineering applications. Students will also gain experience in using a state-of-the-art commercial CFD package and advanced understanding of a range of engineering problems through working on projects.
Textbooks
J.H. Ferziger & M. Peric/Computational Methods for Fluid Dynamics/3rd Edition/2002//

Research units

All candidates are required to complete a minimum of 12 credit points from the following units:
CIVL5020 Capstone Project A

Credit points: 6 Teacher/Coordinator: Dr Gwenaelle Proust Session: Semester 1,Semester 2 Classes: Lecture 1 hr/week; Research 10 hrs/week; Meeting, Prerequisites: 96 cp from MPE degree program or 24 cp from the ME program (including any credit for previous study) Assessment: Through semester assessment (100%) Mode of delivery: Supervision
Capstone Project provides an opportunity for students to conduct original research. Students will generally work individually and an individual thesis must be submitted by each student. Capstone Project is a major task and is to be conducted with work spread over most of the year, in two successive Units of Study of 6 credits points each, Capstone Project A (CIVL5020) and Capstone Project B (CIVL5021). This particular unit of study, which must precede CIVL5021 Capstone Project B, should cover the first half of the work required for a complete Capstone Project. In particular, it should include almost all planning of a research or investigation project, a major proportion of the necessary literature review (unless the entire project is based on a literature review and critical analysis), and a significant proportion of the investigative work required of the project.
CIVL5021 Capstone Project B

Credit points: 6 Teacher/Coordinator: Dr Gwenaelle Proust Session: Semester 1,Semester 2 Classes: Research 10 hrs/week; Meeting, Corequisites: CIVL5020 Assessment: Through semester assessment (100%) Mode of delivery: Supervision
Capstone Project provides an opportunity for students to conduct original research. Students will generally work individually and an individual thesis must be submitted by each student. Capstone Project is a major task and is to be conducted with work spread over most of the year, in two successive Units of Study of 6 credits points each, Capstone Project A (CIVL5020) and Capstone Project B (CIVL5021). This particular unit of study, which must be preceded by or be conducted concurrently with CIVL5020 Capstone Project A, should cover the second half of the work required for a complete Capstone Project. In particular, it should include completion of all components of the research or investigation project planned but not undertaken or completed in CIVL5020 Capstone Project A.
CIVL5022 Capstone Project B Extended

Credit points: 12 Teacher/Coordinator: Dr Gwenaelle Proust Session: Semester 1,Semester 2 Classes: Research 10 hrs/week; Meeting, Prerequisites: 42 credit points in the Master of Engineering and WAM >70, or 66 credit points in the Master of Professional Engineering and WAM >70 or exemption. Assessment: Through semester assessment (100%) Mode of delivery: Supervision
Note: Department permission required for enrolment
Capstone Project provides an opportunity for students to conduct original research. Students will generally work in groups, although planning and writing of the thesis will be done individually; i.e., a separate thesis must be submitted by each student. Only in exceptional circumstances and by approval of Capstone Project course coordinator and the relevant academic supervisor concerned will a student be permitted to undertake a project individually.
Capstone Project is a major task and is to be conducted with work spread over most of the year, in two successive Units of Study of 6 credits points each, Capstone Project A (CIVL5020) and Capstone Project B (CIVL5021) or this unit Capstone Project B extended (CIVL5022) worth 12 credit points. This particular unit of study, which must be preceded by or be conducted concurrently with CIVL5020 Capstone Project A, should cover the second half of the work required for a complete Capstone Project. In particular, it should include completion of all components of the research or investigation project planned but not undertaken or completed in CIVL5020 Capstone Project A.
CIVL5222 Dissertation A

Credit points: 12 Teacher/Coordinator: Dr Gwenaelle Proust Session: Semester 1,Semester 2 Prohibitions: ENGG5221, ENGG5220 Assessment: Through semester assessment (100%) Mode of delivery: Supervision
Note: Department permission required for enrolment
Note: In order to enrol in a project, students must first secure an academic supervisor in an area that they are interested. The topic of your project must be determined in discussion with the supervisor. The supervisor can come from any of the Engineering Departments, however, they need to send confirmation of their supervision approval to the Postgraduate Administrator.
To complete a substantial research project and successfully analyse a problem, devise appropriate experiments, analyse the results and produce a well-argued, in-depth thesis.
Department permission required for enrolment in sessions 1 and 2
CIVL5223 Dissertation B

Credit points: 12 Teacher/Coordinator: Dr Gwenaelle Proust Session: Semester 1,Semester 2 Prohibitions: ENGG5220, ENGG5221 Assessment: Through semester assessment (100%) Mode of delivery: Supervision
Note: Department permission required for enrolment
Note: In order to enrol in a project, students must first secure an academic supervisor in an area that they are interested. The topic of your project must be determined in discussion with the supervisor. The supervisor can come from any of the Engineering Departments, however, they need to send confirmation of their supervision approval to the Postgraduate Administrator.
To complete a substantial research project and successfully analyse a problem, devise appropriate experiments, analyse the results and produce a well-argued, in-depth thesis.
Department permission required for enrolment in sessions 1 and 2
With permission from the Program Director candidates progressing with distinction (75%) average or higher results may replace CIVL5020, CIVL52021 and 12 cp of electives with CIVL5222 & CIVL5223 Dissertation A & B.

Elective units

Candidates may complete a maximum of 12 credit points from the following units:
Specialist units may also be taken as Elective units. Other Postgraduate units in the Faculty may be taken as Elective units with the approval of the Program Director.
Electives may be approved for candidates who have been granted RVL with the approval of the Program Director.
AMME5202 Advanced Computational Fluid Dynamics

Credit points: 6 Teacher/Coordinator: Prof Steve Armfield Session: Semester 1 Classes: Laboratory 2 hrs/week; Lecture 1 hr/week; Tutorial 1 hr/week. Assumed knowledge: Partial differential equations; Finite difference methods;Taylor series; Basic fluid mechanics including pressure, velocity, boundary layers, separated and recirculating flows. Basic computer programming skills. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Objectives: To provide students with the necessary skills to use commercial Computational Fluid Dynamics packages and to carry out research in the area of Computational Fluid Dynamics. Expected outcomes: Students will have a good understanding of the basic theory of Computational Fluid Dynamics, including discretisation, accuracy and stability. They will be capable of writing a simple solver and using a sophisticated commercial CFD package. Syllabus summary: A course of lectures, tutorials and laboratories designed to provide the student with the necessary tools for using a sophisticated commercial CFD package. A set of laboratory tasks will take the student through a series of increasingly complex flow simulations, requiring an understanding of the basic theory of computational fluid dynamics (CFD). The laboratory tasks will be complemented by a series of lectures in which the basic theory is covered, including: governing equations; finite difference methods, accuracy and stability for the advection/diffusion equation; direct and iterative solution techniques; solution of the full Navier-Stokes equations; turbulent flow; Cartesian tensors; turbulence models.
CHNG5006 Advanced Wastewater Engineering

Credit points: 6 Teacher/Coordinator: A/Prof Geoff Barton Session: Semester 2 Classes: Lecture 2 hrs/week; Tutorial 1 hr/week; Laboratory 1 hr/week. Assumed knowledge: CHNG5005 OR CHNG3804. Assessment: Through semester assessment (65%) and Final Exam (35%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit of study addresses inter-related issues relevant to wastewater treatment including: (i) the diverse nature of wastewater and its characteristics; (ii) an overview of conventional wastewater treatment options; (iii) the use of commercial software in designing and evaluating a range of advanced wastewater treatment options including biological nutrient removal; (iv) the potential role of constructed wetlands in domestic and industrial wastewater treatment; (v) wastewater management in the food processing, resources, and coal seam gas production industries; (vi) researching advanced wastewater treatment options.
CIVL5266 Steel Structures - Stability

Credit points: 6 Teacher/Coordinator: Dr Cao Hung Pham Session: Semester 1 Classes: Lecture 2 hrs/week; Tutorial 2 hrs/week. Assumed knowledge: There are no prerequisites for this unit of study but it is assumed that students are competent in the content covered in Structural Mechanics, Steel Structures, and Structural Analysis. Assessment: Through semester assessment (30%) and Final Exam (70%) Mode of delivery: Normal (lecture/lab/tutorial) day
Objectives:
This Unit aims to:
- provide fundamental understanding at advanced level of the behaviour and design steel structural members, notably members undergoing cross-sectional and/or global buckling.
- provide fundamental understanding of the methods available for determining buckling loads of structural members and elements, and explain how classical solutions to buckling problems are incorporated in national design standards for steel structures, including AS4100 and AS/NZS4600.
Outcomes:
It is anticipated that at the end of this unit of study students will be familiar with the buckling behaviour of steel structures and will understand the methods available for determining buckling loads of structural members and cross-section. Students will have a good understanding of the stability design provisions for steel structures specified in the standards AS4100 and AS/NZS4600, and will be proficient in using software for calculating buckling loads.
Syllabus Summary:
Stability theory, Plate theory, Stability of plates and plate assemblies, Theory for thin-walled members in torsion and bi-axial bending, Stability of thin-walled members, Stability design to AS4100 and AS/NZS4600, Direct Strength Method.
CIVL5269 Concrete Structures - Strength and Service

Credit points: 6 Teacher/Coordinator: Damith Mohotti Session: Semester 2 Classes: Lecture 2 hrs/week; Tutorial 2 hrs/week; Laboratory 2 hrs/week. Prerequisites: CIVL3205 OR CIVL5507 OR CIVL9205 Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
This Unit reviews the fundamental concepts of 'elastic' behaviour of reinforced concrete structures and introduces models of behaviour and methods of analysis related to the time-dependent effects of creep and shrinkage (at service loads). This Unit also examines the non-linear (strain-softening) behaviour of reinforced concrete and the related effects concerning the strength of statically-indeterminate reinforced concrete structures. In particular, this Unit examines the concepts of ductility, moment-redistribution and plastic design (for beams and slabs). Strut-and-tie modelling of reinforced concrete members is also described. Design guidelines will reflect requirements of the Australian Standards and Eurocodes.
Outcomes:
This Unit will provide students with the following knowledge and skills:
- understanding of the fundamental concepts and theoretical models concerning the time-dependent structural effects of concrete creep and shrinkage;
- ability to carry out calculations to estimate 'elastic' load-effects (stresses/strains/deformations) for reinforced concrete structures (at service loads), accounting for the time-dependent effects of concrete creep and shrinkage;
- understanding of the fundamental concepts and theoretical models of the strain-softening behaviour of reinforced concrete (in flexure);
- understanding of the fundamental concepts and numerical models of ductility and moment redistribution for reinforced concrete beams;
- ability to quantitatively assess the ductility and moment-redistribution capacity of reinforced concrete beams;
- understanding of the fundamental concepts and numerical models of plastic behaviour and design for reinforced concrete beams and slabs (including yield-line analysis);
- ability to determine the ultimate plastic load-carrying capacity of statically-indeterminate reinforced-concrete beams and slabs;
- ability to use strut-and-tie models of reinforced concrete behaviour.
CIVL5351 Geoenvironmental Engineering

Credit points: 6 Teacher/Coordinator: Dr Abbas Elzein Session: Semester 1 Classes: Lecture 2 hrs/week; Tutorial 2 hrs/week. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Objectives: To develop an understanding of the geotechnical aspects of the design and management of industrial and domestic waste disposal systems.
Learning Outcomes: 1. Analyse flow regime in soil using Darcy equation; 2. Analyse contaminant migration in soil using coupled flow and reactive diffusion advection equations; 3. Design a single or double composite landfill liner satisfying groundwater quality requirements; 4. Predict the potential for methane production in a landfill and assess the feasibility of waste-to-energy conversion; 5. Conduct research on a geoenvironmental topic as part for group.
Syllabus Summary: introduction to geoenvironmental engineering; integrated waste management and life cycle assessment; soil composition and mineralogy; types and characteristics of contaminants; theory of water seepage in soil and hydraulic conductivity; theory of reactive contaminant transport in soil including molecular diffusion, mechanical dispersion and advective flow; analytical and numerical solutions of reactive diffusion advection equation; design of landfills; geosynthetics and geomembranes; defects and leakage rates; methane generation in landfills and landfill gas management.
Textbooks
Rowe, R.K., Quigley, R.M. Richard Brachman and Booker, J.R./Clayey barrier systems for waste disposal facilities/2nd Edition/2004// Hari D. Sharma and Krishna R. Reddy./Geoenvironmental Engineering: Site Remediation, Waste Containment, And Emerging Waste Management Technologies/2004//
CIVL5453 Geotechnical Hazards

Credit points: 6 Teacher/Coordinator: Dr Pierre Rognon Session: Semester 2 Classes: Lecture: 3 hours per week; Tutorial: 1 hour per week. Assumed knowledge: CIVL2410 AND CIVL3411. Students are assumed to have a good knowledge of fundamental soil mechanics, which is covered in the courses of soil mechanics (settlement, water flow, soil strength) and foundation engineering (soil models, stability analyses; slope stability; retaining walls; foundation capacity). Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
Geotechnical flows include landslides, rock falls and mud flows. They are triggered by soil failure due to natural or human causes. The objective of this Unit of Study is to develop the ability to assess and mitigate the risks associated to such events. Students will learn how to estimate when and where these events are likely to occur, how to define safety zones and how to design effective protection structures. The syllabus is comprised of (i) Landslide Risk Assessment and Management procedures (ii) post-faillure and out of equilibrium soil mechanics applied to prediction of rock fall, landslide and mud flow run-out distance and impact force on structures; (iii) design of geotechnical protection structures.
Textbooks
Australian Geomechanics Society/AGS Geoguides/2007// Australian Geomechanics Society/Guidelines for Landslide Risk Management/2007//
CIVL5458 Numerical Methods in Civil Engineering

Credit points: 6 Teacher/Coordinator: Dr Fernando Alonso-Marroquin Session: Semester 1 Classes: Lecture 2 hrs/week; Tutorial 2 hrs/week. Assessment: Through semester assessment (70%) and Final Exam (30%) Mode of delivery: Normal (lecture/lab/tutorial) day
Objectives:
The objective of this unit is to provide students with fundamental knowledge of finite element analysis and how to apply this knowledge to the solution of civil engineering problems at intermediate and advanced levels.
At the end of this unit, students should acquire knowledge of methods of formulating finite element equations, basic element types, the use of finite element methods for solving problems in structural, geotechnical and continuum analysis and the use of finite element software packages. The syllabus comprises introduction to finite element theory, analysis of bars, beams and columns, and assemblages of these structural elements; analysis of elastic continua; problems of plane strain, plane stress and axial symmetry; use, testing and validation of finite element software packages; and extensions to apply this knowledge to problems encountered in engineering practice.
Outcomes:
On completion of this unit, students will have gained the following knowledge and skills:
1. Knowledge of methods of formulating finite element equations. This will provide students with an insight into the principles at the basis of the FE elements available in commercial FE software.
2. Knowledge of basic element types. Students will be able to evaluate the adequacy of different elements in providing accurate and reliable results.
3. Knowledge of the use of finite element methods for solving problems in structural and geotechnical engineering applications. Students will be exposed to some applications to enable them to gain familiarity with FE analyses.
4. Knowledge of the use of finite element programming and modeling.
5. Extended knowledge of the application of FE to solve civil engineering problems.
Textbooks
Fernando Alonso-Marroquin/Finite Element Modelling for Civil Engineering/3rd/2015//
CIVL5665 Advanced Water Resources Management

Credit points: 6 Teacher/Coordinator: Dr Federico Maggi Session: Semester 2 Classes: Lecture 2 hrs/week; Tutorial 1 hr/week. Assumed knowledge: CIVL3612 Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
The objective of this unit of study is to introduce students and professionals to water resources engineering. The aim of this unit is to provide an understanding of: hydrologic cycle from the broadest perspective, physical, chemical and biological characterization of water, how to change the water quality parameters, water quality control and management, water quality in the environment, nutrient and contaminant cycling and removal, water treatment methods for drinking, wastewater and groundwater, conservation/reuse/treatment techniques, desalination, stormwater, bioremediation and phytoremediation techniques. The topics mentioned above will be covered in both a qualitative and quantitative aspects. A basic level of integral and differential calculus is required as well as knowledge and use of calculation software such as Excell and Matlab.
CIVL5670 Reservoir Stream and Coastal Eng

Credit points: 6 Teacher/Coordinator: Prof John Patterson Session: Semester 1 Classes: Lectures 2 hrs/week; Tutorials 2 hrs/week. Assumed knowledge: CIVL3612 and MATH2061. Assessment: Through semester assessment (40%) and Final Exam (60%) Mode of delivery: Normal (lecture/lab/tutorial) day
The objectives of this Unit of Study are to develop an understanding of the processes occurring in lakes, reservoirs, streams and coastal seas, and an introduction to transport and mixing in inland waters, and to the design the design of marine structures. The unit will cover the mass and heat budget in stored water bodies, mixing, and the implications for water quality. In streams, simple transport models will be introduced, and simple models for dissolved oxygen transport discussed. The basic equations for linear and non linear wave theories in coastal seas will be introduced, and wave forces on structures and an introduction to design of offshore structures will be discussed.
(Students who have previously studied CIVL3613 will only be permitted to enrol in this unit by approval of the Director of Undergraduate Studies.)
ENGG5231 Engineering Graduate Exchange A

Credit points: 6 Teacher/Coordinator: GSE Administration Session: Intensive January,Intensive July Mode of delivery: Normal (lecture/lab/tutorial) day
The purpose of this unit is to enable students to undertake an overseas learning activity during the university's summer or winter break while completing a Masters degree in either Engineering, Professional Engineering, Information Technologies or Project Management. The learning activity may comprise either a short project under academic or industry supervision or summer or winter school unit of study at an approved overseas institution. The learning activity should demonstrate outcomes and workload equivalent to a 6 credit point Master's level unit in the student's current award program.
Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.
ENGG5232 Engineering Graduate Exchange B

Credit points: 6 Teacher/Coordinator: GSE Administration Session: Intensive January,Intensive July Mode of delivery: Normal (lecture/lab/tutorial) day
The purpose of this unit is to enable students to undertake an overseas learning activity during the university's summer or winter break while completing a Masters degree in either Engineering, Professional Engineering, Information Technologies or Project Management. The learning activity may comprise either a short project under academic or industry supervision or summer or winter school unit of study at an approved overseas institution. The learning activity should demonstrate outcomes and workload equivalent to a 6 credit point Master's level unit in the student's current award program.
Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.

For more information on units of study visit CUSP (https://cusp.sydney.edu.au).