University of Sydney Handbooks - 2017 Archive

Download full 2017 archive Page archived at: Mon, 28 Aug 2017 11:21:56 +1000

Master of Urban and Regional Planning

Unit of study descriptions

Certificate, Diploma and Master of Urban and Regional Planning

All Master degree candidates are required to complete either a Report or Dissertation.

All streams

Core units

PLAN9061 Planning Principles, Systems and Practice

Credit points: 6 Teacher/Coordinator: Dr Adrienne Keane Session: Semester 1,Semester 2a Classes: 4-day intensive (9am-5pm) Prohibitions: PLAN9020 or PLAN9044 Assessment: Assignment 1 (40%); Assignment 2 presentation (Group 10%); Assignment 3 (50%). Peer assessment will occur for group activities. Mode of delivery: Block mode
This unit aims to prepare you for professional practice as a strategic or development assessment planner. It focuses on social, economic and environmental principles for contemporary planning practice; the systems for land use planning and environmental management in Australia, and the practice of statutory planning and development assessment in NSW.
By the end of this unit of study you will: understand the social, economic, and environmental principles underpinning contemporary planning practice; appreciate key legal and institutional processes for environmental planning in Australia and internationally; be familiar with the various planning state, regional, and local planning instruments in NSW, and understand when and how they apply to planning proposals. You will also be able to assess the social, economic, and environmental impacts of basic planning proposals, and justify these recommendations in professional planning reports. In preparing for professional practice you will gain an understanding of the principles, techniques and requirements for public participation in environmental planning and assessment; and the ethical responsibilities of land use planners, including respect for diversity and the importance of social equity, in guiding decision making processes and assessing planning proposals.
PLAN9063 Strategic Planning and Design

Credit points: 6 Teacher/Coordinator: Prof Peter Phibbs Session: Semester 1 Classes: Lectures 2 hrs/wk Prohibitions: PLAN9027 Assessment: Three reports and graphics, based on group work on a project, with individual submissions, each equivalent to 2,000-2,500 words in length. Assessment (2 x 30%, 1 x 40%). Peer assessment may occur with group work. Mode of delivery: Normal (lecture/lab/tutorial) day
The aim of PLAN9063 Strategic Planning and Design is to provide students with grounding in the core knowledge and skills needed to practice as a contemporary planner. A key emphasis in the unit is understanding the skills needed to undertake strategic planning at a range of levels (both process and content). Strategic planning in one form or other is a generic process that underpins much of the work that planners and urban designers are involved in at varying spatial levels. This course will provide students with the basic skills required to function as a planner and it will also act as an introduction to a number of other units in the program by highlighting the connection between the work of a planner and the need to understand a range of different knowledge and skill areas. The basic skills which will be covered include basic demographic analysis, graphic presentation, governance audits, consultation strategies and survey tools, economic analysis, and GIS. In addition, this Unit of Study will enable students to develop generic skills such as group discussion, productive group work and organisation, negotiation skills and information literacy skills. This is an introductory core unit for the Urban Planning degree and an elective for the Urban Design degree.
PLAN9068 History and Theory of Planning and Design

Credit points: 6 Teacher/Coordinator: Assoc Prof Paul Jones Session: Semester 1 Classes: Lecture 2 hrs/wk Prohibitions: PLAN9031 or ARCH9062 or ARCH9031 or MARC4201 Assessment: Assignment 1 short questions (35%); group work local area analysis (30%); analytical essay (25%); attendance and class participation (10%). Peer review may apply to group work. Mode of delivery: Normal (lecture/lab/tutorial) day
This unit is in two overlapping modules, each of which is assessed.
Module one enables students to understand how the main concepts and practices of urban planning and development have evolved; appreciate different perspectives about the roles and purposes of planning; undertake basic historical research about Australian urban planning and development issues, and prepare basic stories and arguments about practical planning issues and current theories. There is a strong emphasis on enriching the ability of students to better appreciate urban form, structure and planning practice generally by analysing such form, structure and process through the lens of history (as 'snapshots' in time), and the understanding planning drivers that shape and express such urban change. Interpreting planning practice and what this means and reflects (such as underlying values, norms attitudes, public interest, etc) is a key element of this module.
Concurrent with module one, module two familiarises students with the main ideas and methods that have influenced urban design practice from the late nineteenth century to the present. It covers the dominant urban design theories, principles, conceptual and physical models, analytical methods and drawings from key contributing authors over the period, and explores critically how and why these arose, their interrelationships, spheres of influence, and continuing validity. In this module, key urban design 'classics' are discussed critically as history, design sources and tools.
Students will be able to: critically review and interpret key planning and urban design texts, construct and present basic arguments, orally and in documents; access and engage with key literature and other sources of knowledge; and use basic conceptual frameworks about planning arguments and stories for both the overlapping fields of urban planning and urban design.
This is an introductory core unit for both the Urban Planning and Urban Design degrees.
PLAN9045 Economics for the Built Environment

Credit points: 6 Teacher/Coordinator: Prof Peter Phibbs Session: Semester 2 Classes: Lecture 2 hrs/wk Assessment: 2 x individual written reports of 2,000 words (70%); 1 x group presentation and report (30%). Peer assessment may occur for group work. Mode of delivery: Normal (lecture/lab/tutorial) day
The aim of PLAN9045 Economics for the Built Environment is to introduce the key economic theories, processes and techniques used by contemporary urban planners. This unit of study has two parts. In the first part of the unit, students are introduced to the economic drivers shaping city and regional development outcomes, and the location and form of different land uses and how they evolve. The second part of the unit equips students with core technical skills, including project evaluation, economic impact analysis, development feasibility, and introductory aspects of public finance. A key focus of the course is to equip students with a very good working knowledge of property feasibility analysis.
PLAN9064 Land Use and Infrastructure Planning

Credit points: 6 Teacher/Coordinator: Assoc Prof Paul Jones Session: Semester 2 Classes: Lecture 2 hrs/wk. Additonal tuition time may be assigned for introduction to graphic plan making. Assumed knowledge: ARCH9100 Assessment: Two illustrated reports, each equivalent to 2,000 to 2,500 words, consisting of 1 x group work on a project (50%) and 1 x individual report (40%); class attendance and participation (10%). Peer assessment may apply to group work. Mode of delivery: Normal (lecture/lab/tutorial) day
This unit is primarily concerned with planning, land use and infrastructure within the built environments. It emphasises conceptual knowledge, with examples and case studies to demonstrate the application of concepts in practice. Students are encouraged to think independently, creatively and critically in developing understanding and practical knowledge about environmental planning at the metropolitan and local level. This unit is in two modules, each of which is assessed.
1. Land use, infrastructure planning and urban development: different forms of infrastructure; the role of infrastructure in creating good environments and urban development; transport and the space economy; accessibility, the emergence of transport technologies and their influence on urban form; the impacts of car travel on densities, dispersion, congestion etc; orthodox transport planning; transport systems management; demand management and travel pricing; traffic restraint and local area traffic management; mobility and accessibility; networks, centres, and development corridors; transit oriented development and urban form. The Sydney Metropolitan Strategy and concepts contained therein are used as a main focus for this module.
2. Land use planning, development control and plan making: within the context of more effective land use planning, this module examines the process of assessing a local area (such as structure, form and understanding character), developing local vision and neighbourhood strategies and structure plan, translating the strategy and structure plan into basic land use and planning controls (such as building height, floor space ratio, heritage, and other local area provisions) and producing a basic plan for development control purposes. A case study is used for group work (with practitioners involved) so as to understand how the plan making process evolves and is constructed. Questioning the assumptions and values that underpin planning controls and guidelines is a key skill emphasised in the unit via the group work. This is an introductory core unit for the Urban Planning degree and an elective for the Urban Design degree.
ARCH9100 Introduction to Urban Design

Credit points: 6 Teacher/Coordinator: Ms Katherine Westlake Session: Semester 1a,Semester 2a Classes: Intensive delivery for total of 38 hours Assessment: Formative assessment (60%), summative assessment (40%); assessments comprise both group and indivdual components. Peer review of group work will be required. Mode of delivery: Block mode
Note: Students may be granted advanced standing based on experience and a portfolio.
This introductory unit of study will provide students with the necessary skills to participate effectively in the urban design studios and will include site, spatial and public domain analysis, map and plan reading, visual, verbal and written communication techniques, and basic computer-based 3-dimensional modelling and numerical analysis. This unit will introduce students to the objectives and principles of urban design by analysing a number of public spaces, the spaces between buildings and the public domain and urban conditions in Sydney.
PLAN9018 Planning Report

Credit points: 12 Teacher/Coordinator: Dr Adrienne Keane Session: Semester 1,Semester 2 Classes: Independent Study + Seminars Prerequisites: 48 credit points of units Prohibitions: ARCH9031 or ARCH9060 or ARCH9045 or ARCH9046 or PLAN9010 or PLAN9011 Assessment: Final presentation and poster (10%); Report of between 10,000 and 12,000 words (90%) Mode of delivery: Normal (lecture/lab/tutorial) day
Note: This unit is for Master of Urban and Regional Planning students only.
The planning report is a substantial piece of research conducted over one semester. It takes the form of report (between 10,000 and 12,000 words) on an approved urban and regional planning subject of your choice and/or maybe based on a priority thematic topic agreed with a local Council in the Sydney metropolitan area. You will be required to participate in a small number of relevant studios / meetings in developing and presenting this work. For example, in 2013, planning report topics evolved out of forum with officers from Liverpool City Council, for example, and were subsequently presented to Council officers at the end of semester. The objective of the planning report is therefore to advance your knowledge and analytical skills in a particular relevant and topical area and so develop a "professional edge" in a real world planning situation. The expected learning outcomes of the report include the ability to: think critically about a planning problem and develop an appropriate research methodology or analytical approach to address it; identify and access appropriate sources of information, research and literature relevant to urban and regional planning issues; undertake primary and secondary research relevant to problems in planning practice; present your findings in a way that demonstrates academic and professional competence. A planning report generally includes: a literature review to delineate a planning problem, concern or gap in knowledge; a statement of research aims or objectives, as well as research questions; an explanation of research methods; presentation and analysis of data; discussion of conclusions. Permission to continue the Planning Report is subject to a satisfactory research proposal which must be approved by your supervisor by week 3 of semester. Supervisors from the URP program are allocated at the end of week 1 of semester and students work with their supervisors on an agreed timetable throughout semester. Planning reports are due at the end of the first week of exams for the semester in which you are enrolled.
PLAN9010 Planning Dissertation 1

Credit points: 12 Teacher/Coordinator: Dr Adrienne Keane Session: Semester 1,Semester 2 Classes: Independent Study + Seminars Prohibitions: PLAN9018 or ARCH9031 or ARCH9045 or ARCH9046 or ARCH9060 Assumed knowledge: PLAN9068, PLAN9061, PLAN9063, PLAN9045, PLAN9064, ARCH9100 Assessment: Final presentation (or progress presentation if continuing in the second semester - feedback only) (5%); presentation poster (5%); dissertation of between 15,000 and 25,000 words (90%) Mode of delivery: Normal (lecture/lab/tutorial) day
Note: Department permission required for enrolment
Note: The dissertation is suitable for students with a grade average at Distinction level or above or who wish to pursue a research career. The dissertation should be undertaken towards the end of the degree. This unit is for Master of Urban and Regional Planning students only. It MUST be undertaken in conjunction with PLAN9011 Planning Dissertation 2, either in the same or following semester.
The planning dissertation is a substantial piece of research, conducted full time over one semester (by enrolment in PLAN9010 and PLAN9011), or part time over two semesters (by consecutive enrolment in these units). It takes the form of a document (between 15,000 and 25,000 words) on an approved urban and regional planning subject of your choice. Students electing to do a stream in the MURP program must select a topic relevant to their chosen stream. There is also an option for students to prepare a shorter document suitable for publication in a refereed journal. The planning dissertation is an opportunity to advance your knowledge and skills in a particular area. For those intending to undertake further academic study, the dissertation also provides an opportunity for you to develop your research and inquiry skills. The objective of the dissertation is to allow you to develop higher order research and analytic skills by undertaking an in depth study of your own selection. The expected learning outcomes of the dissertation include the ability to: think critically about a planning problem and develop an appropriate research methodology or analytical approach to address it; identify and access appropriate sources of information, research and literature relevant to urban and regional planning issues; undertake primary and secondary research; present your findings in a way that demonstrates academic and professional competence. A dissertation generally includes: a strong literature review to delineate a problem or gap in knowledge; a statement of research aims or objectives, as well as research questions and / or hypotheses; explanation of research methods; presentation and analysis of data; discussion of conclusions; an abstract. Permission to continue the Planning Dissertation is subject to a satisfactory research proposal which must be approved by your supervisor by week 3 of semester. The dissertation will be marked by two examiners and may include an oral presentation. Dissertations are due at the end of the first week of exams for the semester in which you are enrolled in Planning Dissertation 2. Note that only one submission is required for both Planning Dissertation 1 and 2. It is not possible to complete Dissertation 1 independently of Dissertation 2. Students who intend a shorter project should enrol in PLAN9018 Planning Report.
PLAN9011 Planning Dissertation 2

Credit points: 12 Teacher/Coordinator: Dr Adrienne Keane Session: Semester 1,Semester 2 Classes: Independent Study + Seminars Corequisites: PLAN9010 Assumed knowledge: PLAN9068, PLAN9061, PLAN9063, PLAN9045, PLAN9064, ARCH9100 Assessment: Final presentation (or progress presentation if continuing in the second semester - feedback only) (5%); presentation poster (5%); dissertation of 15,000 to 25,000 words (90%) Mode of delivery: Normal (lecture/lab/tutorial) day
Note: This unit is for Masters of Urban and Regional Planning students only. It MUST be taken in conjunction with PLAN9010 Planning Dissertation 1, either in the same or preceding semester.
The planning dissertation is a substantial piece of research, conducted full time over one semester (by enrolment in PLAN9010 and PLAN9011), or part time over two semesters (by consecutive enrolment in these units). It takes the form of a document (between 15,000 and 25,000 words) on an approved urban and regional planning subject of your choice. Students electing to do a stream in the MURP program must select a topic relevant to their chosen stream. There is also an option for students to prepare a shorter document suitable for publication in a refereed journal. The planning dissertation is an opportunity to advance your knowledge and skills in a particular area. For those intending to undertake further academic study, the dissertation also provides an opportunity for you to develop your research and inquiry skills. The objective of the dissertation is to allow you to develop higher order research and analytic skills by undertaking an in depth study of your own selection. The expected learning outcomes of the dissertation include the ability to: think critically about a planning problem and develop an appropriate research methodology or analytical approach to address it; identify and access appropriate sources of information, research and literature relevant to urban and regional planning issues; undertake primary and secondary research; present your findings in a way that demonstrates academic and professional competence. A dissertation generally includes: a strong literature review to delineate a problem or gap in knowledge; a statement of research aims or objectives, as well as research questions and / or hypotheses; explanation of research methods; presentation and analysis of data; discussion of conclusions; an abstract. Permission to continue the Planning Dissertation is subject to a satisfactory research proposal which must be approved by your supervisor by week 3 of semester. The dissertation will be marked by two examiners and may include an oral presentation. Dissertations are due at the end of the first week of exams for the semester in which you are enrolled in Planning Dissertation 2. Note that only one submission is required for both Planning Dissertation 1 and 2. It is not possible to complete Dissertation 1 independently of Dissertation 2. Students who intend a shorter project should enrol in PLAN9018 Planning Report.

Elective units

PLAN9049 International Urban Development Planning

Credit points: 6 Teacher/Coordinator: Assoc Prof Paul Jones Session: Semester 1a Classes: Overseas Intensive Mode ¿ lectures, seminars and group work discussions, International Field Trip. Assessment: Two major assignments: (1) development concepts and current issues (50%); (2) draft project design document and analysis (40%); attendance and participation (international field trip) (10%) Mode of delivery: Block mode
Note: Department permission required for enrolment
Note: In 2017 this unit will be run as an overseas intensive.
This unit is designed to fill a significant gap in the evolution of the urban and regional planning syllabus. Development project assistance is a multi billion dollar industry with Australia alone contributing significantly through projects and technical assistance in Africa, Asia (east, south and north) and the Pacific. Additionally there are multilateral agency programs from the World and Asian Development Banks and from the largest donor countries of Japan, the United States and European nations. There are many parallels between urban and regional plan making and the design of development projects. Indeed, some planning consultancies are primarily engaged in international development assistance work. Differences in context, approach, content and implementation place particular demands on development project designers that are not addressed in standard land use planning texts. Additionally, expenditure of large sums of public money has brought with it demands for quality assurance (QA) assessment at each stage of the development project activity cycle. An introduction to QA methodology and practice is a necessary component of development project design. International development assistance is a huge business employing large numbers of Australian consultants, contractors and supplying companies together with those of partner governments. Planners contribute to the design, implementation and evaluation of urban development projects in most of the neighbouring countries of Asia and the Pacific. Development project design is conditioned by several key elements including: components of the project activity cycle, thematic policy goals and essential quality assurance requirements. This unit is designed for planners who may work in the field of international development and who have an interest in better understanding urbanisation, especially in the Pacific Region. By the end of this unit of study you should have an understanding of the role and scope of urban development assistance project planning; an ability to undertake the studies required at each stage of the development project activity cycle; familiarity with the fundamentals of development project design; ability to comply with design conditions imposed by the key policy themes of: poverty, gender equity, environmental and sustainability focused development objectives; familiarity with the scope and character of urban and regional planning project design and implementation in the Asia-Pacific region; and an understanding of quality assurance assessment methodology in development project assessment. The unit reflects the increasing internationalisation of Australian planning practice in better managing urbanisation, especially within the Pacific Region. It caters to the needs of local and international students intending to work on urban and regional planning projects within a development assistance context.
PLAN9071 Housing and Urban and Regional Development

Credit points: 6 Teacher/Coordinator: Prof Nicole Gurran Session: Semester 1 Classes: Four day intensive (9am-5pm) Assessment: Two assignments (2 x 50%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit introduces the key policy and planning issues associated with the "production" and "consumption" of housing. These range from the physical location and sustainable design of new housing, through to the dynamics of the housing market, and the contribution of housing strategies to urban and regional revitalisation. The unit focuses on emerging themes in housing and urban development, and develops practical skills in designing strategic planning, policy, and project based responses to encourage more affordable, appropriate and environmentally sustainable housing outcomes for urban and regional Australia. By the end of this unit of study you should understand the basic structure and operation of housing markets; be familiar with important policy objectives for housing within the broader context of sustainable urban or regional development, such as sustainability, affordability and appropriateness of design; and understand the relationships between these policy objectives and the land use planning framework. You will also learn the basic skills associated with the housing development process, from financial feasibility through to the design and approval of a particular project.
PLAN9073 GIS Based Planning Policy and Analysis

Credit points: 6 Teacher/Coordinator: Assoc Prof Paul Jones Session: Intensive June,Intensive November Classes: 4 day intensive (9am-5pm) Assessment: Two smaller analytical assessments (2 x 25%) and a larger report (50%) Mode of delivery: Block mode
Note: Department permission required for enrolment
This unit is concerned with using GIS to analyse planning problems and undertake policy analyses. The unit will include a comprehensive introduction to mapping and the use of GIS: data structures, topology, projections, spatial and non-spatial queries. Australian census products will be described and students will be expected to analyse census statistics using GIS maps. The role of GIS in coordinating various forms of information for policy analyses, preparing master plans, in presenting information for development control, impact analyses and wider management purposes will also be covered. The use of GIS to support visualisation will be covered, using examples about designing development projects and planning instruments. Finally, the various forms of distributing maps to the public and policy-makers will be discussed. The unit integrates the hands-on learning of GIS software with a `research-based` approach. Teaching will involve short lectures, studios and workshops. Assessment will be on a series of smaller assignments and a larger report prepared by each student that integrates GIS-based (and other) graphics into a coherent policy analysis. In addition, each student will make oral presentations on their work in studio sessions.
ARCH9063 Urban Morphology

Credit points: 6 Teacher/Coordinator: Ms Deena Ridenour Session: Semester 2 Classes: 3 hrs lectures/tutorials Prerequisites: ARCH9100 Prohibitions: ARCH9021 Assumed knowledge: Some prior study of architectural, urban or planning history. Assessment: Scoping Report and Presentation (20%); Draft Report and Presentation (30%); and Final Report (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
The unit outlines the nature of urban morphology, and its rise as an area of study, and explores the evolution of city forms with an emphasis upon urban structure and typology. Most designed components of our cities conform in their general characteristics to identifiable types; they reflect the functions of cities, cultural values and the technological, economic and social circumstances of their times. These have been laid down over particular landforms and previous built forms and landscapes to result in usually complex, and often distinct, local characteristics.
The ability to recognize, investigate and respond to these forms and relationships lies at the heart of good urban design. The development of an historical knowledge, and of sensibilities and skills in the recording and interpretation of urban pattern and form for design purposes is the unit's primary aim. It will develop abilities to make more informed 'readings' of the urban landscape, and judgements about structure and form in contemporary urban design: retention, modification, replacement, etc. On completion, a student will be better able to: recognize structures and patterns, and key building and spatial typologies that contribute to overall city morphology; record and describe these, investigate and explain their origins, and discuss informatively their place in urban change and contemporary design.
It complements History and Theory Planning and Design (PLAN9068) which emphasises the theories and models underpinning the forms that are covered in this unit. It is a core unit that supports the Urban Design Studios in the Urban Design program and the Integrated Urbanism Studio in the Urbanism program and an informative elective for students enrolled in or intending to enrol in the Urban Architecture Research Studio.
ARCH9080 Urban Ecology, Design and Planning

Credit points: 6 Teacher/Coordinator: Dr Adrienne Keane Session: Semester 2 Classes: 3 hrs lectures/tutorials/wk Prohibitions: PLAN9048 Assessment: Two assessments, each 50%; both assessments may comprise group and individual work. Peer assessment of group tasks may be required. Mode of delivery: Block mode
This unit will introduce the conceptual bases for sustainable development and explore how principles of sustainability can be introduced into land use planning and urban design, including environmental management and multi-criteria evaluation methodologies in three modules:
Module 1 will examine the evolution of urban areas in relation to their biophysical setting using the Sydney metropolitan area as a case study. This will lead to an understanding and appreciation of the urban ecology of the city in terms of the flows of materials, resources and energy, and the challenges presented by climate change and peak oil.
Module 2 will introduce principles of sustainability and the history and development of concepts of urban sustainability.
Module 3 will introduce methods and frameworks for evaluating and measuring sustainability.
ARCH9090 Dialogue, Deliberation and Engagement

Credit points: 6 Teacher/Coordinator: Professor Lyn Carlson Session: Intensive November Classes: Intensive workshop over 3 days (8:30am to 6:00pm); 28.5 direct contact hours; 6 hours follow-up tutorials Assessment: Assessment 1 Learning Journal (30%); Assessment 2 Comparative Critical Analysis of Two Journal Articles (30%); Assessment 3 Deliberative Design (40%) Mode of delivery: Block mode, Normal (lecture/lab/tutorial) day
This elective unit will help build the skills and knowledge to design and implement forms of dialogue, deliberation and engagement that are most effective. In the context of major changes to the way planning and design is carried out in NSW and more widely, this is an opportunity to develop independent study skills and perspectives on engagement and collaboration in planning and urban design. The unit allows for a visiting academic to teach a subject related to their speciality. Students will participate in lectures, tutorials, or other activities as needed to pursue the elective topic. Students will develop an understanding of a special topic through reports, projects, and/or tutorial exercises. The workshop format is a stimulating combination of practical experience and scholarly learning, involving people working in the field of community engagement and public participation - planners, urban designers, consultants, change agents, community development practitioners, policy makers, government staff - who have an interest or a requirement to engage citizens or communities.
Textbooks
Readings will be distributed prior to and during the Master Class. Students will also be referred to online publications for assessment purposes.
GOVT6163 Critical Challenges of Governing Cities

Credit points: 6 Session: Semester 1 Classes: 1x1hr lecture/ week, 1x1hr seminar/ week Assessment: 1x1500wd issue analysis (20%), 1x1500wd research proposal (20%), 1x3000wd research report (50%), seminar participation (10%) Mode of delivery: Normal (lecture/lab/tutorial) day
In an urban society, cities form the locus for critical public policy challenges. This unit considers the multi-level, co-governance of cities in the comparative context of Western democracies. It considers the validity of contending theories of urban governance and explores the systemic tensions between public policy goals, such as subsidiarity and solidarity. It seeks to equip students with a critical understanding of the complexities and challenges of urban politics and policymaking in real world application.
Students may complete up to 18 credit points of related units of study from within the School or the University if they can substantiate that a unit undertaken elsewhere strengthens and complements their professional interest area in urban and regional planning.

Heritage Conservation Stream

Optional units

ARCH9028 Conservation Methods and Practices

Credit points: 12 Teacher/Coordinator: Dr Cameron Logan Session: Semester 2 Classes: Lecture 4 hrs/wk + site visits Assessment: Two assignments (2 x 50%) Mode of delivery: Normal (lecture/lab/tutorial) day
Note: Department permission required for enrolment
The aims of this unit are to develop skills in the methods and practices of conservation at an accepted professional level, and to interpret and apply the theory taught in the mandatory core of the course in practical, on-site projects. The unit focuses on culturally significant structures and cultural landscapes and includes: methods of survey and documentation (locating, describing and recording components with possible heritage value; identifying and reading historic fabric; historic and archival research methods; thematic history methods; pattern recognition; natural systems; settlements; cultural mapping; aesthetic analysis; material and stylistic analysis); evaluation methodology (assigning heritage significance); assessment methodology (establishing conservation priorities); and appropriate conservation actions (conservation and management plans, policies and strategies). At the end of the unit the student will successfully demonstrate: an understanding of the Australia ICOMOS Burra Charter and the ability to prepare, in accordance with current accepted professional practice, a conservation plan of a place or places of cultural significance; skill in methods and techniques of analysis, assessment and documentation of cultural significance; and the ability to develop relevant policies and strategies for the conservation of a variety places of cultural significance. The intended outcomes are achieved through inquiry, individual study and research and are demonstrated by each student upon the successful completion of set assignments. The assignments are constructed to allow each student to demonstrate his or her level of understanding of the accepted professional methodology and practice in the preparation and presentation of a conservation plan. Assessment criteria based on unit outcomes are used for the examination of the assignments.
ARCH9074 Principles of Heritage Conservation

Credit points: 6 Teacher/Coordinator: Dr Cameron Logan Session: Semester 1 Classes: Lectures 2 hrs/wk Prohibitions: ARCH9003 Assessment: Weekly Discussion Forum/In-class Test (30%), Research Proposal (10%), Research Paper (60%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit will introduce students to key controversies, theoretical propositions and practical innovations that have driven the historical development of heritage conservation. The unit covers ideas and examples from the ancient world until the present, with the main focus being on the period from 1850 until today.
The aim of the unit is to help students to arrive at a clear understanding of the concepts and practices that define heritage conservation and to promote a strong historical perspective on the field. Students will consider, for example, the meaning of, and differences between, conservation, restoration and reconstruction; the different forms of historical value that inform our place protection efforts; the function of conservation protocols such as The Venice Charter, Burra Charter and Hoi Ann Protocols; the importance of advocacy and activism; the growth of world heritage and its relationship to human rights and cultural rights; and the ideas of cultural landscape and historic urban landscape. The unit will also challenge you to think about areas of practice and theory that challenge traditional approaches and knowledge such as indigenous heritage and the conservation of modernism.
ARCH9075 New Design in Old Settings

Credit points: 6 Teacher/Coordinator: Dr Cameron Logan Session: Semester 1 Classes: 3 hrs/week combination of lectures, tutorials, seminars, site visits. Assessment: Group work (30%); individual assignments (70%). Total of 4000-5000 words. Mode of delivery: Normal (lecture/lab/tutorial) day
New Design in Old Settings explores the architectural approaches, conservation methodologies and planning issues relevant to situations when new meets old in the built environment. The unit highlights architecturally innovative reuse projects, exemplary additions and alterations to historic places, and architecturally distinguished new buildings in historic precincts and landscapes. We also examine historic theming, façadism and some of the design ideas and planning compromises that have blighted historic places.
The aims of the unit are to develop an understanding of the history of designing and building new buildings in old settings; to develop an understanding of the major theoretical and practical issues of designing new buildings in old settings; to develop an ability to assess critically the appropriateness of new development in culturally significant places. Students will develop analytical skills in assessing design strategies and develop confidence in making critical judgements about design propositions in historically significant settings.
ARCH9082 Conservation of Traditional Materials

This unit of study is not available in 2017

Credit points: 6 Teacher/Coordinator: Dr Cameron Logan Session: Intensive March Classes: Lectures:2 hrs/wk (11 wks), site visits: 2hrs/wk (2 wks) Assessment: 1x 4000 word essay (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
The aims of the course are to introduce students to broad range of specialists from the related fields of architectural conservation and related disciplines who specialize in the conservation of traditional building fabric; to introduce students to the appropriate and accepted methods traditional construction and of the conservation traditional architectural materials; and to familiarise students with the relevant literature pertaining to the domain. The objectives of the course are to allow the student to develop a broad understanding of excellent contemporary conservation practice in the conservation of traditional materials; to develop a broad understanding of traditional building methods; to develop an understanding of good and bad practice in the conservation of traditional materials. Students will be expected to demonstrate the ability to research and prepare academic paper related to the domain.
Class preparation: 1hour/week, assessment preparation: 15-20 hours/semester