University of Sydney Handbooks - 2017 Archive

Download full 2017 archive Page archived at: Mon, 28 Aug 2017 11:21:57 +1000

Unit of study descriptions

Master of Engineering majoring in Geomechanical Engineering

To qualify for the award of the Master of Engineering in this specialisation, a candidate must complete 72 credit points, including core and elective units of study as listed below.
Candidates with a Bachelor of Engineering Honours or equivalent in the relevant discipline, and who have reached the required level of academic achievement in their prior degree, may be eligible for a reduction of volume in learning of up to 24 credit points.

Core units

Candidates must complete 24 credit points of Core units.
Where Reduced Volume Learning has been granted candidates must complete a minimum of 12 credit points of Core units.
ENGG5102 Entrepreneurship for Engineers

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Prohibitions: ELEC5701 Assumed knowledge: Some limited industry experience is preferred but not essential. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit of study aims to introduce graduate engineering students from all disciplines to the concepts and practices of entrepreneurial thinking. Introduction to Entrepreneurship will offer the foundation for leaders of tomorrow's high-tech companies, by providing the knowledge and skills important to the creation and leadership of entrepreneurial ventures. The focus of the unit of study is on how to launch, lead and manage a viable business starting with concept validation to commercialisation and successful business formation.
The following topics are covered: Entrepreneurship: Turning Ideas into Reality, Building the Business Plan, Creating a Successful Financial Plan, Project planning and resource management, Budgeting and managing cash flow, Marketing and advertising strategies, E-Commerce and Entrepreneurship, Procurement Management Strategies, The Legal Environment: Business Law and Government Regulation, Intellectual property: inventions, patents and copyright, Workplace, workforce and employment topics, Conflict resolution and working relationships, Ethics and Social Responsibility.
ENGG5202 Sustainable Design, Eng and Mgt

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Assumed knowledge: General knowledge in science and calculus and understanding of basic principles of chemistry, physics and mechanics Assessment: Through semester assessment (70%) and Final Exam (30%) Mode of delivery: Normal (lecture/lab/tutorial) day
The aim of this unit of study is to give students an insight and understanding of the environmental and sustainability challenges that Australia and the planet are facing and how these have given rise to the practice of Sustainable Design, Engineering and Management. The objective of this course is to provide a comprehensive overview of the nature and causes of the major environmental problems facing our planet, with a particular focus on energy and water, and how engineering is addressing these challenges.
The course starts with a description of the physical basis of global warming, and proceeds with a discussion of Australia's energy and water use, an overview of sustainable energy and water technologies and sustainable building design. Topics include the principles of sustainability, sustainable design and social responsibility, sustainable and renewable energy sources, and sustainable use of water. Aspects of designing a sustainable building, technologies that minimise energy and water consumption, consider recycling and reducing waste disposal using advanced design will also be discussed during this course.
ENGG5103 Safety Systems and Risk Analysis

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day
To develop an understanding of principles of safety systems management and risk management, as applied to engineering systems. AS/NZS 4801:2001 & 4804:2001 form the foundation for teaching methods of developing, implementing, monitoring and improving a safety management system in an Engineering context.
Students will be exposed to a number of case studies related to safety systems and on completion of the course be able to develop a safety management plan for an Engineering facility that meets the requirements of NSW legislation and Australian standards for Occupational Health and Safety management systems.
Students are introduced to a variety of risk management approaches used by industry, and methods to quantify and estimate the consequences and probabilities of risks occurring, as applied to realistic industrial scenarios.
PMGT5871 Project Process Planning and Control

Credit points: 6 Session: Intensive December,Intensive July,Semester 1,Semester 2 Classes: Lectures, Tutorials Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) evening
"Project Management processes are what moves the project from initiation through all its phases to a successful conclusion. This course takes the project manager from a detailed understanding of process modelling through to the development and implementation of management processes applicable to various project types and industries and covers approaches to reviewing, monitoring and improving these processes.
Specifically, the UoS aims to: Develop understanding of the nature and purpose of project management in the context of economic enterprise; Develop knowledge of various models and frameworks for the practical application of project management; Explore core elements of effective project management with particular focus on technological development and innovation"

Specialist units

Candidates must complete 24 credit points of Specialist units, but may take additional units as Electives.
Where Reduced Volume Learning has been granted candidates must complete a minimum of 24 credit points of Specialist units.
Exchange units may be taken as Specialist units with the approval of the Program Director.
CIVL6450 Analysis and Design of Pile Foundations

Credit points: 6 Session: Semester 1 Classes: Lectures, Project Work - own time, Laboratories Prohibitions: CIVL5450 Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Objectives: To develop an understanding of the modern principles of design of pile foundations and the application of those principles to practice.
Outcomes: Students should gain an advanced understanding of the types of pile foundations used in practice, and the procedures for analysis of pile foundations under various types of loading, and gain experience in carrying out pile design for real geotechnical profiles.
Syllabus summary: Types of piles and their uses, effects of pile installation, axial capacity of piles and pile groups, settlement of pile foundations, ultimate lateral capacity, lateral deformations, analysis of pile groups subjected to general loading conditions, piled raft foundations, piles subjected to ground movements, pile load testing, code provisions for pile design.
CIVL6452 Foundation Engineering

Credit points: 6 Session: Semester 1 Classes: Project Work - in class, Lectures, Tutorials Prohibitions: CIVL5452 Assumed knowledge: CIVL2410 AND CIVL3411. Students are assumed to have a good knowledge of fundamental soil mechanics, which is covered in the courses of soil mechanics (settlement, water flow, soil strength) and foundation engineering (soil models, stability analyses; slope stability; retaining walls; foundation capacity) Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
The objectives of this unit are to gain an understanding of the design process in foundation engineering, to understand the importance of site investigation and field testing, and to learn how to deal with uncertainty. To achieve these objectives students are asked to design foundations using real data. Students will develop the ability to interpret the results of a site investigation; to use laboratory and field data to design simple foundations; develop an appreciation of the interaction between the soil, foundation system and the supported structure. The syllabus is comprised of field testing, site characterisation, interpretation of field data, design pof pile raft and surface footings, support of excavations, soil improvement, and geotechnical report writing.
CIVL6454 Rock Engineering

Credit points: 6 Session: Semester 2 Classes: Project Work - in class, Laboratories Prohibitions: CIVL5454 Assumed knowledge: Undergraduate geology and soil mechanics. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Objectives: to develop an understanding of the behaviour and design of engineering structures in rock masses.
Outcomes: Students will have learnt how to classify and characterise rocks and rock masses for engineering purposes and developed an understanding of basic rock mechanics, etc.
Syllabus summary: Introduction to rock mechanics and rock engineering. Index properties and engineering characterisation of rocks and rock masses. Planes of weakness in rock masses. Rock material strength and rock mass strength. Rock deformability. In situ stress conditions in rock masses. Underground openings. Rock slopes.
CIVL6455 Engineering Behaviour of Soils

Credit points: 6 Session: Semester 2 Classes: Lectures, Laboratories, Tutorials Prohibitions: CIVL5455 Assumed knowledge: CIVL2410 AND CIVL3411. A knowledge of basic concepts and terminology of soil mechanics is assumed. Experience with geotechnical practice in estimating parameters from field and laboratory data would be useful but not essential. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
This is an advanced soil mechanics course. It is concerned with the mechanical stress, strain, strength behaviour and the application of this knowledge in geotechnical engineering. The course includes an introduction to critical state soil mechanics, which is used to assist with the interpretation of soil data, and to enable prediction of ground behaviour. The course uses the critical state framework to provide a firm basis for an understanding of the stress, strain, strength behaviour of all soils, and to enable a rational approach to the selection of parameters for use in geotechnical design.

Research units

All candidates are required to complete a minimum of 12 credit points from the following units:
CIVL5020 Capstone Project A

Credit points: 6 Session: Semester 1,Semester 2 Classes: Lectures, Research, Meeting Prerequisites: 96 cp from MPE degree program or 24 cp from the ME program (including any credit for previous study) Assessment: Through semester assessment (100%) Mode of delivery: Supervision
The capstone project requires the student to plan and execute a substantial research-based project, using their technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice thus demonstrating the achievement of AQF Level 9.
Capstone Project provides an opportunity for students to conduct original research. Students will generally work individually and an individual thesis must be submitted by each student.
Capstone Project is a major task and is to be conducted with work spread over most of the year, in two successive Units of Study of 6 credits points each, Capstone Project A (CIVL5020) and Capstone Project B (CIVL5021). This particular unit of study, which must precede CIVL5021 Capstone Project B, should cover the first half of the work required for a complete Capstone Project. In particular, it should include almost all planning of a research or investigation project, a major proportion of the necessary literature review (unless the entire project is based on a literature review and critical analysis), and a significant proportion of the investigative work required of the project.
A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.
CIVL5021 Capstone Project B

Credit points: 6 Session: Semester 1,Semester 2 Classes: Research, Meeting Corequisites: CIVL5020 Assessment: Through semester assessment (100%) Mode of delivery: Supervision
The capstone project requires the student to plan and execute a substantial research-based project, using their technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice thus demonstrating the achievement of AQF Level 9.
Capstone Project provides an opportunity for students to conduct original research. Students will generally work individually and an individual thesis must be submitted by each student.
Capstone Project is a major task and is to be conducted with work spread over most of the year, in two successive Units of Study of 6 credits points each, Capstone Project A (CIVL5020) and Capstone Project B (CIVL5021). This particular unit of study, which must be preceded by or be conducted concurrently with CIVL5020 Capstone Project A, should cover the second half of the work required for a complete Capstone Project. In particular, it should include completion of all components of the research or investigation project planned but not undertaken or completed in CIVL5020 Capstone Project A.
A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.
CIVL5022 Capstone Project B Extended

Credit points: 12 Session: Semester 1,Semester 2 Classes: Research, Meeting Prerequisites: 42 credit points in the Master of Engineering and WAM >70, or 66 credit points in the Master of Professional Engineering and WAM >70 or exemption. Assessment: Through semester assessment (100%) Mode of delivery: Supervision
Note: Department permission required for enrolment
The capstone project requires the student to plan and execute a substantial research-based project, using their technical and communication skills to design, evaluate, implement, analyse and theorise about developments that contribute to professional practice thus demonstrating the achievement of AQF Level 9.
Capstone Project provides an opportunity for students to conduct original research. Students will generally work individually and an individual thesis must be submitted by each student.
Capstone Project is a major task and is to be conducted with work spread over most of the year, in two successive Units of Study of 6 credits points each, Capstone Project A (CIVL5020) and Capstone Project B (CIVL5021). This particular unit of study, which must be preceded by or be conducted concurrently with CIVL5020 Capstone Project A, should cover the second half of the work required for a complete Capstone Project. In particular, it should include completion of all components of the research or investigation project planned but not undertaken or completed in CIVL5020 Capstone Project A.
A thesis at this level will represent a contribution to professional practice or research, however the timeframe available for the thesis also needs to be considered when developing project scopes. Indeed, a key aim of the thesis is to specify a research topic that arouses sufficient intellectual curiosity, and presents an appropriate range and diversity of technical and conceptual challenges, while remaining manageable and allowing achievable outcomes within the time and resources available. It is important that the topic be of sufficient scope and complexity to allow a student to learn their craft and demonstrate their research skills. Equally imperative is that the task not be so demanding as to elude completion. Finally the ability to plan such a project to achieve results within constraints and the identification of promising areas and approaches for future research is a key assessment criterion.
CIVL5222 Dissertation A

Credit points: 12 Session: Semester 1,Semester 2 Prohibitions: ENGG5221, ENGG5220 Assessment: Through semester assessment (100%) Mode of delivery: Supervision
Note: Department permission required for enrolment
Note: In order to enrol in a project, students must first secure an academic supervisor in an area that they are interested. The topic of your project must be determined in discussion with the supervisor. The supervisor can come from any of the Engineering Departments, however, they need to send confirmation of their supervision approval to the Postgraduate Administrator.
To complete a substantial research project and successfully analyse a problem, devise appropriate experiments, analyse the results and produce a well-argued, in-depth thesis.
CIVL5223 Dissertation B

Credit points: 12 Session: Semester 1,Semester 2 Prohibitions: ENGG5220, ENGG5221 Assessment: Through semester assessment (100%) Mode of delivery: Supervision
Note: Department permission required for enrolment
Note: In order to enrol in a project, students must first secure an academic supervisor in an area that they are interested. The topic of your project must be determined in discussion with the supervisor. The supervisor can come from any of the Engineering Departments, however, they need to send confirmation of their supervision approval to the Postgraduate Administrator.
To complete a substantial research project and successfully analyse a problem, devise appropriate experiments, analyse the results and produce a well-argued, in-depth thesis.
With permission from the Program Director candidates progressing with distinction (75%) average or higher results may replace CIVL5020, CIVL5021 and 12 credit points of electives with CIVL5222 & CIVL5223 Dissertation A & B.
A candidate who has been granted RVL and who is eligible to undertake the extended capstone project or dissertation may be granted exemption of up to 12 credit points of specialist units.

Elective units

Candidates may complete a maximum of 12 credit points from the following units:
Specialist units may also be taken as Elective units. Other Postgraduate units in the Faculty may be taken as Elective units with the approval of the Program Director.
Electives may be approved for candidates who have been granted RVL with the approval of the Program Director.
AMME5202 Advanced Computational Fluid Dynamics

Credit points: 6 Session: Semester 1 Classes: Laboratories, Lectures, Tutorials Assumed knowledge: Partial differential equations; Finite difference methods;Taylor series; Basic fluid mechanics including pressure, velocity, boundary layers, separated and recirculating flows. Basic computer programming skills. Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Objectives: To provide students with the necessary skills to use commercial Computational Fluid Dynamics packages and to carry out research in the area of Computational Fluid Dynamics. Expected outcomes: Students will have a good understanding of the basic theory of Computational Fluid Dynamics, including discretisation, accuracy and stability. They will be capable of writing a simple solver and using a sophisticated commercial CFD package.
Syllabus summary: A course of lectures, tutorials and laboratories designed to provide the student with the necessary tools for using a sophisticated commercial CFD package. A set of laboratory tasks will take the student through a series of increasingly complex flow simulations, requiring an understanding of the basic theory of computational fluid dynamics (CFD). The laboratory tasks will be complemented by a series of lectures in which the basic theory is covered, including: governing equations; finite difference methods, accuracy and stability for the advection/diffusion equation; direct and iterative solution techniques; solution of the full Navier-Stokes equations; turbulent flow; Cartesian tensors; turbulence models.
CIVL5266 Steel Structures - Stability

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Assumed knowledge: There are no prerequisites for this unit of study but it is assumed that students are competent in the content covered in Structural Mechanics, Steel Structures, and Structural Analysis. Assessment: Through semester assessment (30%) and Final Exam (70%) Mode of delivery: Normal (lecture/lab/tutorial) day
This Unit aims to:
- provide fundamental understanding at advanced level of the behaviour and design steel structural members, notably members undergoing cross-sectional and/or global buckling.
- provide fundamental understanding of the methods available for determining buckling loads of structural members and elements, and explain how classical solutions to buckling problems are incorporated in national design standards for steel structures, including AS4100 and AS/NZS4600.
Outcomes:
It is anticipated that at the end of this unit of study students will be familiar with the buckling behaviour of steel structures and will understand the methods available for determining buckling loads of structural members and cross-section. Students will have a good understanding of the stability design provisions for steel structures specified in the standards AS4100 and AS/NZS4600, and will be proficient in using software for calculating buckling loads.
Syllabus Summary:
Stability theory, Plate theory, Stability of plates and plate assemblies, Theory for thin-walled members in torsion and bi-axial bending, Stability of thin-walled members, Stability design to AS4100 and AS/NZS4600, Direct Strength Method.
CIVL5269 Advanced Concrete Structures

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials, Laboratories Prerequisites: CIVL3205 OR CIVL5507 OR CIVL9205 Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
This Unit reviews the fundamental concepts of 'elastic' behaviour of reinforced concrete structures and introduces models of behaviour and methods of analysis related to the time-dependent effects of creep and shrinkage (at service loads). This Unit also examines the non-linear (strain-softening) behaviour of reinforced concrete and the related effects concerning the strength of statically-indeterminate reinforced concrete structures. In particular, this Unit examines the concepts of ductility, moment-redistribution and plastic design (for beams and slabs). Strut-and-tie modelling of reinforced concrete members is also described. Design guidelines will reflect requirements of the Australian Standards and Eurocodes.
This Unit will provide students with the following knowledge and skills: understanding of the fundamental concepts and theoretical models concerning the time-dependent structural effects of concrete creep and shrinkage; ability to carry out calculations to estimate 'elastic' load-effects (stresses/strains/deformations) for reinforced concrete structures (at service loads), accounting for the time-dependent effects of concrete creep and shrinkage; understanding of the fundamental concepts and theoretical models of the strain-softening behaviour of reinforced concrete (in flexure); understanding of the fundamental concepts and numerical models of ductility and moment redistribution for reinforced concrete beams; ability to quantitatively assess the ductility and moment-redistribution capacity of reinforced concrete beams; understanding of the fundamental concepts and numerical models of plastic behaviour and design for reinforced concrete beams and slabs (including yield-line analysis); ability to determine the ultimate plastic load-carrying capacity of statically-indeterminate reinforced-concrete beams and slabs; ability to use strut-and-tie models of reinforced concrete behaviour.
CIVL5351 Geoenvironmental Engineering

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Geoenvironmental Engineering is an applied science concerned with the protection of the subsurface from human activities. It can be divided into 2 main branches: waste containment and treatment of pollution sites. The former is usually a preventative activity, whereas the latter is corrective, i.e. it occurs after pollution has taken place. Geoenvironmental Engineering draws on fundamental science, especially the chemistry of low-permeability material such as clay, fluid flow in soil and contaminant migration in soil. The goal of CIVL5351 is to introduce you to the science behind Geoenvironmental Engineering and develop your skills at designing waste containment systems.
Learning Outcomes: 1. Analyse flow regime in soil using Darcy equation; 2. Analyse contaminant migration in soil using coupled flow and reactive diffusion-advection equations; 3. Design a single or double composite landfill liner satisfying groundwater quality requirements; 4. Predict the potential for methane production in a landfill and assess the feasibility of waste-to-energy conversion; 5. Conduct research on a geoenvironmental topic as part for group.
Syllabus Summary: introduction to geoenvironmental engineering; integrated waste management and life cycle assessment; soil composition and mineralogy; types and characteristics of contaminants; theory of water seepage in soil and hydraulic conductivity; theory of reactive contaminant transport in soil including molecular diffusion, mechanical dispersion and advective flow; analytical and numerical solutions of reactive diffusion advection equation; design of landfills; geosynthetics and geomembranes; defects and leakage rates; methane generation in landfills and landfill gas management.
CIVL5453 Geotechnical Hazards

Credit points: 6 Session: Semester 2 Classes: Lectures, Tutorials, Project Work - in class, Project Work - own time Assumed knowledge: (CIVL2410 AND CIVL3411) OR (CIVL9410 AND CIVL9411). Students are assumed to have a good knowledge of fundamental soil mechanics, which is covered in the courses of soil mechanics (settlement, water flow, soil strength) and foundation engineering (soil models, stability analyses; slope stability; retaining walls; foundation capacity). Assessment: Through semester assessment (50%) and Final Exam (50%) Mode of delivery: Normal (lecture/lab/tutorial) day
Geotechnical hazards include landslides, rock falls and mud flows. They are triggered by soil/rock failure due to natural or human causes. The objective of this Unit of Study is to develop the ability to assess and mitigate the risks associated to such events.
Students will learn how to estimate when and where these events are likely to occur, how to define safety zones and how to design effective protection structures. The syllabus is comprised of (i) Landslide Risk Assessment and Management procedures (ii) post-failure and out of equilibrium soil mechanics applied to prediction of rock fall, landslide and mud flow run-out distance and impact force on structures; (iii) design of geotechnical protection structures using Finite Element modelling.
Senior geotechnical engineers from major companies will deliver some guest lectures presenting on practical case study involving geotechnical hazards throughout the semester.
CIVL5458 Numerical Methods in Civil Engineering

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials, Demonstration Assessment: Through semester assessment (80%) and Final Exam (20%) Mode of delivery: Normal (lecture/lab/tutorial) day
The objective of this unit is to provide students with fundamental knowledge of finite element analysis and how to apply this knowledge to the solution of civil engineering problems at intermediate and advanced levels.
At the end of this unit, students should acquire knowledge of methods of formulating finite element equations, basic element types, the use of finite element methods for solving problems in structural, geotechnical and continuum analysis and the use of finite element software packages. The syllabus comprises introduction to finite element theory, analysis of bars, beams and columns, and assemblages of these structural elements; analysis of elastic continua; problems of plane strain, plane stress and axial symmetry; use, testing and validation of finite element software packages; and extensions to apply this knowledge to problems encountered in engineering practice.
Outcomes:
On completion of this unit, students will have gained the following knowledge and skills:
1. Knowledge of methods of formulating finite element equations. This will provide students with an insight into the principles at the basis of the FE elements available in commercial FE software.
2. Knowledge of basic element types. Students will be able to evaluate the adequacy of different elements in providing accurate and reliable results.
3. Knowledge of the use of finite element methods for solving problems in structural and geotechnical engineering applications. Students will be exposed to some applications to enable them to gain familiarity with FE analyses.
4. Knowledge of the use of finite element programming and modeling.
5. Extended knowledge of the application of FE to solve civil engineering problems.
CIVL5668 Fundamentals of Wind Engineering for Design

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Assessment: Through semester assessment (60%) and Final Exam (40%) Mode of delivery: Normal (lecture/lab/tutorial) day
This unit of study will introduce the fundamentals of meteorology governing wind flow, details of extreme wind events, wind structure, statistical distribution of the wind, the effect of topography and terrain changes on wind profile, investigate the fluid flow around bluff bodies, and detail the design of civil engineering structures for wind loading.
This unit will provide students with the following knowledge and skills: On completion of this course students will have an understanding of the governing principles of wind engineering, how to predict the extreme wind speed and analyse anemographs, predict the effect of terrain and topography on velocity and turbulence, understand flow patterns around bodies, how to predict the pressure distribution and wind loading on bodies and structures, dynamic response of structures, and how all the above relates to AS1170.2.
CIVL5670 Reservoir, Stream and Coastal Engineering

Credit points: 6 Session: Semester 1 Classes: Lectures, Tutorials Assumed knowledge: CIVL3612 and MATH2061. Assessment: Through semester assessment (40%) and Final Exam (60%) Mode of delivery: Normal (lecture/lab/tutorial) day
The objectives of this unit of study are to develop an understanding of the processes occurring in lakes, reservoirs, streams and coastal seas, an introduction to transport and mixing in inland waters, and to the design the design of marine structures. The unit will cover the mass and heat budget in stored water bodies, mixing, and the implications for water quality. In streams, natural river systems will be discussed, and the principles of sediment transport and scour, monitoring and management will be introduced. The basic equations for linear and nonlinear wave theories in coastal seas will be introduced, and wave forces on structures and an introduction to design of offshore structures will be discussed.
CSYS5010 Introduction to Complex Systems

Credit points: 6 Session: Semester 1,Semester 2 Classes: Lectures, Laboratories, Independent Study Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Globalisation, rapid technological advances, the development of integrated and distributed systems, cross-disciplinary technical collaboration, and the emergence of "evolved" (as opposed to designed) systems are some of the reasons why many systems have begun to be described as complex systems in recent times. Complex technological, biological, socio-economic and socio-ecological systems (power grids, communication and transport systems, food webs, megaprojects, and interdependent civil infrastructure) are composed of large numbers of diverse interacting parts and exhibit self-organisation and/or emergent behaviour. This unit will introduce the basic concepts of "complex systems theory", and focus on methods for the quantitative analysis and modelling of collective emergent phenomena, using diverse computational approaches such as agent-based modelling and simulation, cellular automata, bio-inspired algorithms, and game theory. Students will gain theoretical knowledge of complex adaptive systems, coupled with practical skills in computational simulation and forecasting using a range of modern toolkits.
CSYS5020 Interdependent Civil Systems

Credit points: 6 Session: Semester 1 Classes: Lectures, Laboratories, Independent Study Assessment: Through semester assessment (100%) Mode of delivery: Normal (lecture/lab/tutorial) day
Our modern day civil infrastructure includes transport networks, telecommunications, power systems, financial infrastructure and emergency services, all of which are growing more and more interconnected. Moreover, the behaviour of the modern infrastructure is not dependent only upon the behaviour of its parts: complex civil systems (such as modern power grids), communication and transport systems, megaprojects, social and eco-systems, generate rich interactions among the individual components with interdependencies across systems. This interdependent behaviour brings about significant new challenges associated with the design and management of complex systems. Cascading power failures, traffic disruptions, epidemic outbreaks, chronic diseases, financial market crashes, and ecosystem collapses are typical manifestations of these challenges, affecting the stability of modern society and civil infrastructure. This unit will develop an understanding of how interdependent systems perform under stress, how to improve resilience and how best to mitigate the effects of various kinds of component failure or human error, by more accurate analysis of interdependent cascades of failures across system boundaries. The studied topics will include dynamical analysis of complex interdependent networks, local and global measures of network structure and evolution, cascading failures, as well as predictive measures of catastrophic failure in complex adaptive systems, and the tools that enable planning for resilient infrastructure. This unit will equip future professionals with sufficient expertise and technical know-how for the design of efficient prevention and intervention policies, and robust crisis forecasting and management. This unit will equip future professionals with sufficient expertise and technical know-how for the design of efficient prevention and intervention policies, and robust crisis forecasting and management.
ENGG5231 Engineering Graduate Exchange A

Credit points: 6 Session: Intensive January,Intensive July Mode of delivery: Normal (lecture/lab/tutorial) day
The purpose of this unit is to enable students to undertake an overseas learning activity during the university's summer or winter break while completing a Masters degree in either Engineering, Professional Engineering, Information Technologies or Project Management. The learning activity may comprise either a short project under academic or industry supervision or summer or winter school unit of study at an approved overseas institution. The learning activity should demonstrate outcomes and workload equivalent to a 6 credit point Master's level unit in the student's current award program.
Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.
ENGG5232 Engineering Graduate Exchange B

Credit points: 6 Session: Intensive January,Intensive July Mode of delivery: Normal (lecture/lab/tutorial) day
The purpose of this unit is to enable students to undertake an overseas learning activity during the university's summer or winter break while completing a Masters degree in either Engineering, Professional Engineering, Information Technologies or Project Management. The learning activity may comprise either a short project under academic or industry supervision or summer or winter school unit of study at an approved overseas institution. The learning activity should demonstrate outcomes and workload equivalent to a 6 credit point Master's level unit in the student's current award program.
Students may enrol in this unit with permission from the school and the Sub-Dean Students for the Faculty of Engineering and Information Technologies.

For more information on units of study visit CUSP (https://cusp.sydney.edu.au).