University of Sydney Handbooks - 2021 Archive

Download full 2021 archive Page archived at: Thu, 23 Sep 2021 13:38:13 +1000

Civil Engineering

For more information on degree program requirements visit CUSP.

Unit outlines will be available through Find a unit outline two weeks before the first day of teaching for 1000-level and 5000-level units, or one week before the first day of teaching for all other units.
 

Unit of study Credit points A: Assumed knowledge P: Prerequisites C: Corequisites N: Prohibition Session

Master of Professional Engineering (Accelerated) (Civil)

To qualify for the award of the Master of Professional Engineering (Accelerated) in this specialisation, a candidate must complete 96 credit points, including:.
(a) 42 credit points of Core units as listed below
(b) ENGG5217 Practical Experience
(c) 24 credit points of Advanced Elective units
(d) A minimum of 12 credit points of Project or Research Pathway units as detailed below
(e) For candidates undertaking the Project, a minimum of 12 credit points and a maximum of 18 credit points of Elective units, including:
– a minimum of 12 credit points must be 5000-level units
(f) Candidates undertaking the Research Pathway, replace 12 credit points of elective units with Research Pathway units

Core units

ENGG5204
Engineering Professional Practice
6    A Competences and experience in engineering obtained during an accepted engineering degree
Semester 1
CIVL9205
Concrete Structures 1
6    A CIVL9110 AND CIVL9201. Basic concepts of solid mechanics and structural mechanics, including: compatibility of strains; stress-strain relationships; equilibrium; flexure, shear and torsion; statically determinate load effects (reactions, bending moments, shear forces); elastic beam theory (strains, stresses and beam deflections).
Semester 1
CIVL9612
Fluid Mechanics
6    A CIVL9201 AND CIVL9611 AND (ENGG9802 OR CIVL9802). This unit of study follows on from Fluid Mechanics CIVL9611, which provides the essential fundamental fluid mechanics background and theory, and is assumed to be known and fully understood.
Semester 1
ENGG5205
Professional Practice in Project Management
6      Semester 1
Semester 2
CIVL8811
Engineering Design and Construction
6    N CIVL9811
Semester 2
CIVL9206
Steel Structures 1
6    A CIVL9110 AND CIVL9201 AND CIVL9235


It is assumed that students are competent in the following areas: the methods of load transfer in structures - tension, compression, bending, shear, torsion, and bearing; an appreciation of stress and strain, and being able to determine stresses and strains in simple sections under axial force, bending moments, shear and torsion; calculating and understanding the physical significance of geometric section properties - centroid, Ix, Iy, Zx, Zy, Sx, Sy, rx, ry, J, Ag; knowledge of the basic elastic-plastic material properties of steel, E, G, fy, fu; and knowledge of loading of structures. A special "assumed knowledge" lecture will be given in Week 1 to refresh the knowledge of students.
Semester 2
CIVL9903
Civil Engineering Design
6    A CIVL9410 AND CIVL9612 AND [CIVL9811 OR CIVL8811]
P CIVL9205 AND CIVL9206
Semester 1
ENGG5217
Practical Experience
   N ENGP1000 OR ENGP2000 OR ENGP3000 OR ENGG4000 OR CHNG5205 OR AMME5010


Students should have completed one year of their MPE program before enrolling in this unit.
Intensive April
Intensive August
Intensive December
Intensive February
Intensive January
Intensive July
Intensive June
Intensive March
Intensive May
Intensive November
Intensive October
Intensive September

Advanced Elective units

Candidates must complete 24 credit points from the following Advanced Elective units of study.
CHNG5005
Wastewater Engineering
6    A Knowledge of mass and energy balances, mathematics, process design, biochemical processes, and particle mechanics at a level typical of an undergraduate degree in chemical engineering. Assumed knowledge is equivalent to material covered in CHNG1103 AND CHNG2801 AND CHNG2802 AND CHNG3803 AND CHNG3804 AND CHNG3805.
Semester 1
CIVL6257
Concrete Structures - Prestressed Concrete
6    N CIVL5257
Semester 1
CIVL6264
Composite Steel-Concrete Structures
6    N CIVL5264
Semester 2
CIVL6267
Steel Structures - Adv Analysis and Design
6    N CIVL5267
Semester 1
CIVL6268
Structural Dynamics
6    A Students are assumed to have a good knowledge of fundamental structural analysis, which is covered in the courses of Structural Mechanics, Introduction to Structural Concepts and Design, Structural Analysis, and Finite Element Analysis.
N CIVL5268
Semester 2
CIVL6450
Analysis and Design of Pile Foundations
6    N CIVL5450
Semester 1
CIVL6454
Rock Engineering

This unit of study is not available in 2021

6    A Undergraduate geology and soil mechanics.
N CIVL5454
Semester 1
CIVL6455
Engineering Behaviour of Soils
6    A [CIVL2410 OR CIVL9410] AND [CIVL3411 OR CIVL9411]. A knowledge of basic concepts and terminology of soil mechanics is assumed. Experience with geotechnical practice in estimating parameters from field and laboratory data would be useful but not essential.
N CIVL5455
Semester 2
CIVL6456
Energy Geotechnics
6    A [CIVL2410 OR CIVL9410] AND [CIVL3411 OR CIVL9411]
Semester 2
CIVL6665
Advanced Water Resources Engineering
6    A CIVL3612 OR CIVL9612
N CIVL5665
Semester 2
CIVL6666
Open Channel Flow and Hydraulic Structures
6    A Advanced knowledge of fluid mechanics is necessary for this UoS
N CIVL5666
Semester 1
CIVL6669
Applied Fluid Engineering Computing
6    A CIVL3612 or CIVL9612
N CIVL5669
Semester 2

Elective units

Candidates must complete 18 credit points from the following Elective units of study. At least 12 credit points must be 5000-level (CIVL5XXX, CSYSXXX or ENGG5203).
CIVL5266
Steel Structures - Stability
6    A There are no prerequisites for this unit of study but it is assumed that students are competent in the content covered in Structural Mechanics, Steel Structures, and Structural Analysis.
Semester 1
CIVL5269
Advanced Concrete Structures
6    P CIVL3205 OR CIVL9205
Semester 2
CIVL5276
Bridge Engineering
6    A (CIVL2201 and CIVL3205 and CIVL3206) or (CIVL9201 and CIVL9205 and CIVL9206). Students who have not completed Concrete Structures (CIVL3205 or CIVL9205) will be very disadvantaged and should not attempt this unit.
Semester 2
CIVL5277
Structural Rehabilitation and Timber Design
6    A (CIVL2201 AND CIVL3205 AND CIVL3206) OR (CIVL9201 AND CIVL9205 AND CIVL9206)
Semester 2
CIVL5320
Engineering for Sustainable Development
6    P CIVL3310 OR CIVL9310
Semester 2
CIVL5351
Geoenvironmental Engineering
6      Semester 2
CIVL5452
Foundation Engineering
6    A [CIVL2410 OR CIVL9410] AND [CIVL3411 OR CIVL9411]. Students are assumed to have a good knowledge of fundamental soil mechanics, which is covered in the courses of soil mechanics (settlement, water flow, soil strength) and foundation engineering (soil models, stability analyses; slope stability; retaining walls; foundation capacity)
N CIVL6452
Semester 1
CIVL5453
Geotechnical Hazards
6    A (CIVL2410 AND CIVL3411) OR (CIVL9410 AND CIVL9411). Students are assumed to have a good knowledge of fundamental soil mechanics, which is covered in the courses of soil mechanics (settlement, water flow, soil strength) and foundation engineering (soil models, stability analyses; slope stability; retaining walls; foundation capacity).
Semester 2
CIVL5458
Numerical Methods in Civil Engineering
6      Semester 1
CIVL5460
Particle Mechanics for Geotechnics
6      Semester 1
CIVL5533
Energy-efficient Building Systems
6    A CIVL1900 Introduction to Civil Engineering and CIVL2110 Materials and CIVL2201 Structural Mechanics and MATH2061 Linear Mathematics and Vector Calculus
Semester 2
CIVL5668
Fundamentals of Wind Engineering for Design
6      Semester 1
CIVL5670
Reservoir, Stream and Coastal Engineering
6    A (CIVL3612 OR CIVL9612) AND MATH2061
Semester 1
CIVL5701
Transport Networks
6    A CIVL2700 OR CIVL9700
Semester 2
CIVL5702
Traffic Engineering
6    A (CIVL2700 OR CIVL9700) AND (MATH1001 OR MATH1021) AND (MATH1003 OR MATH1023) AND MATH1005 AND ENGG1801. Basic statistics through regression analysis, differential and integral calculus, computer programming.
Semester 1
CIVL5703
Transport Policy, Planning and Deployment
6    A CIVL2700
N CIVL3703 OR CIVL9703
Semester 1
CIVL5704
Transport Analytics
6    A CIVL3704 OR CIVL9704
Semester 2
CIVL5999
Advanced Research and Analysis
6    A (CIVL2201 OR CIVL9201) AND (CIVL2611 OR CIVL9611) AND (CIVL2410 OR CIVL9410)
Semester 1
CIVL9235
Structural Analysis
6    A This unit of study assumes previous study of the fundamental principles of structural mechanics obtained from CIVL9201 Foundations of Structural Mechanics or equivalent introductory structural mechanics subject.
Semester 2
CIVL9310
Humanitarian Engineering
6      Semester 1
CIVL9411
Geotechnical Engineering
6    A Fundamentals of soil mechanics including effective stress, pore pressure, consolidation and seepage.
Semester 2
CIVL9511
Basics of Integrated Building Engineering
6    A CIVL1900 Introduction to Civil Engineering and CIVL2110 Materials and CIVL2201 Structural Mechanics and MATH2061 Linear Mathematics and Vector Calculus
Semester 1
CIVL9614
Hydrology
6    A (CIVL9802 or ENGG9802) AND CIVL9612 AND MATH2061
P CIVL9611
Semester 2
CIVL9704
Transport Informatics
6    A Understanding of statistical inference. Familiarity with the urban transport network and basic concepts in transport studies.
N ENGG2851 OR CIVL3704
Semester 1
CSYS5010
Introduction to Complex Systems
6      Semester 1
Semester 2
CSYS5020
Interdependent Civil Systems
6      Semester 1
ENGG5203
Quality Engineering and Management
6    A First degree in Engineering or a related discipline
Semester 2

Project units

All candidates are required to complete a minimum of 12 credit points of Project or Research units during the final year of study.
Candidates achieving an average mark of 70% or higher are eligible for the Extended Capstone Project.
Extended Capstone Project candidates take Capstone Project units CIVL5020 and CIVL5022 (total 18 CP) in place of Capstone Project CIVL5021 and 6 credit points of elective units.
CIVL5020
Capstone Project A
6    P 96 cp from MPE degree program or 48 cp from the MPE(Accel) program or 24 cp from the ME program (including any credit for previous study).
N CIVL5222 OR CIVL5223
Semester 1
Semester 2
CIVL5021
Capstone Project B
6    C CIVL5020
N CIVL5222 OR CIVL5223 OR CIVL5022
Semester 1
Semester 2
CIVL5022
Capstone Project B Extended
12    P 24 credit points in the Master of Engineering and WAM >=70 or 96 credit points in the Master of Professional Engineering and WAM >=70 or 48cp from MPE(Accel) program and WAM >=70
N CIVL5021 OR CIVL5222 OR CIVL5223

Note: Department permission required for enrolment

Semester 1
Semester 2

Research Pathway

Candidates achieving an average mark of 75% or higher are eligible for the Research Pathway.
Research pathway candidates take Dissertation units CIVL5222 and CIVL5223 (total 24 CP) in place of Capstone Project units and 12 credit points of elective units.
CIVL5222
Dissertation A
12    N CIVL5020 OR CIVL5021 OR CIVL5022

Note: Department permission required for enrolment
In order to enrol in a project, students must first secure an academic supervisor in an area that they are interested. The topic of your project must be determined in discussion with the supervisor. The supervisor can come from any of the Engineering Departments, however, they need to send confirmation of their supervision approval to the Postgraduate Administrator.
Semester 1
Semester 2
CIVL5223
Dissertation B
12    N CIVL5020 OR CIVL5021 OR CIVL5022

Note: Department permission required for enrolment
In order to enrol in a project, students must first secure an academic supervisor in an area that they are interested. The topic of your project must be determined in discussion with the supervisor. The supervisor can come from any of the Engineering Departments, however, they need to send confirmation of their supervision approval to the Postgraduate Administrator.
Semester 1
Semester 2

Exchange units

With approval of the Program Director, up to 12 credit points of Exchange units may be taken in place of other units, towards the requirements of the degree.