University of Sydney Handbooks - 2020 Archive

Download full 2020 archivePage archived at: Tue, 27 Oct 2020

Risk Management

Unit of study Credit points A: Assumed knowledge P: Prerequisites C: Corequisites N: Prohibition Session

Master of Engineering majoring in Risk Management

To qualify for the award of the Master of Engineering in this specialisation, a candidate must complete 72 credit points, including:
1. 24 credit points of Core units
2. 24 credit points of Specialist units
3. A minimum of 12 credit points of Research units
4. A maximum of 12 credit points of Elective units
Candidates who have been granted 24 credit points of Reduced Volume Learning (RVL), must complete 48 credit points including:
1. A minimum of 12 credit points of Core units
2. A minimum of 24 credit points of Specialist units
3. A minimum of 12 credit points of Research units
– Elective units are not available for candidates with RVL

Core units

ENGG5102
Entrepreneurship for Engineers
6    A Some limited industry experience is preferred but not essential.
N ELEC5701
Semester 1
ENGG5202
Sustainable Design, Eng and Mgt
6    A General knowledge in science and calculus and understanding of basic principles of chemistry, physics and mechanics
Semester 1
ENGG5103
Safety Systems and Risk Analysis
6      Semester 2
PMGT5871
Project Process Planning and Control
6    N PMGT6871
Intensive January
Intensive July
Semester 1
Semester 2

Specialist units

AMME5104
Applied Safety Systems and Risk Analysis
6    P ENGG5103. Knowledge of basic safety systems.

Note: Department permission required for enrolment

Semester 1
AMME5105
Risk Management Analysis
6      Semester 1
CHNG9306
Risk Management for Chemical Engineering
6    A CHNG9201 and CHNG9202 and CHNG9203 and CHNG9204and CHNG9206. Mass and energy balances, physical chemistry, physics.
N CHNG3806 OR CHNG5806
Semester 2
PMGT5891
Project Risk Management
6    N PMGT6891
Semester 1
Semester 2
Exchange units may be taken as Specialist units with the approval of the Program Director.

Research units

AMME5020
Capstone Project A
6    P 96 cp from MPE degree program or 48 cp from the MPE(Accel) program or 24 cp from the ME program (including any credit for previous study).
N AMME5222 OR AMME5223 OR AMME5010 OR BMET5020 OR BMET5021 OR BMET5022 OR BMET5222 OR BMET5223 OR BMET5010
Semester 1
Semester 2
AMME5021
Capstone Project B
6    P 96 credit points from the MPE degree program or 48 cp from the MPE(Accel) program or 24 credit points from the ME degree program (including any credit for prior study)
N AMME5022 OR AMME5222 OR AMME5223 OR AMME5010 OR BMET5020 OR BMET5021 OR BMET5022 OR BMET5222 OR BMET5223 OR BMET5010
Semester 1
Semester 2
AMME5022
Capstone Project B Extended
12    P 24 credit points in the Master of Engineering and WAM >=70 or 96 credit points in the Master of Professional Engineering and WAM >=70 or 48cp from MPE(Accel) program and WAM >=70
N AMME5021 OR AMME5222 OR AMME5223 OR BMET5020 OR BMET5021 OR BMET5022 OR BMET5222 OR BMET5223 OR BMET5010

Note: Department permission required for enrolment

Semester 1
Semester 2
AMME5222
Dissertation A
12    N AMME5020 OR AMME5021 OR AMME5022 OR BMET5020 OR BMET5021 OR BMET5022 OR BMET5222 OR BMET5223 OR BMET5010

Note: Department permission required for enrolment
In order to enrol in a dissertation project, students must first secure an academic supervisor in an area that they are interested. Students must have acieved a WAM of 75% or greater in their prior year of study. The topic of your project must be determined in discussion with the supervisor.
Semester 1
Semester 2
AMME5223
Dissertation B
12    N AMME5020 OR AMME5021 OR AMME5022 OR BMET5020 OR BMET5021 OR BMET5022 OR BMET5222 OR BMET5223 OR BMET5010

Note: Department permission required for enrolment
In order to enrol in a dissertation project, students must first secure an academic supervisor in an area that they are interested. Students must have acieved a WAM of 75% or greater in their prior year of study. The topic of your project must be determined in discussion with the supervisor.
Semester 1
Semester 2
With permission from the Program Director students progressing with distinction (75%) average or higher results may replace AMME5020, AMME5021 and 12 credit points of electives with AMME5222 & AMME5223 Dissertation A & B.
A candidate who has been granted RVL and who is eligible to undertake the extended capstone project or dissertation may be granted exemption of up to 12 credit points of specialist units.

Elective units

Specialist units may also be taken as Elective units. Other Postgraduate units in the Faculty may be taken as Elective units with the approval of the Program Director.
AERO5200
Advanced Aerodynamics
6    A BE in the area of Aerospace Engineering or related Engineering field.
P AERO9260 or AERO8260 or AERO3260

Note: Department permission required for enrolment

Semester 2
AERO5400
Advanced Aircraft Design Analysis
6    A Undergraduate level 1, 2 and 3 or Foundation Masters units in Aerospace Design are expected to have been completed before undertaking this unit.
P AERO3460 or AERO9460 or AERO8460
N AERO4491
Semester 2
AERO5500
Flight Mechanics Test and Evaluation Adv

This unit of study is not available in 2020

6    A BE in area of Aerospace Engineering or related Engineering Field.
P AERO5510 OR AERO9560 OR AERO3560

Note: Department permission required for enrolment

Semester 1
AERO9301
Applied Finite Element Analysis
6    A BE in area of Aerospace Engineering or related Engineering field.
P AERO9360 or AERO8360 or MECH9361 or MECH8361
Semester 1
AERO9760
Spacecraft and Satellite Design
6      Semester 1
AFNR5512
Water Management and Variable Climate

This unit of study is not available in 2020

6    A UG Maths or Physics or Hydrology.
Semester 2
AMME5060
Advanced Computational Engineering
6    A Linear algebra, calculus and partial differential equations, Taylor series, the finite difference and finite element methods, numerical stability, accuracy, direct and iterative linear solvers and be able to write Matlab Scripts to solve problems using these methods.
P UG students are required to complete AMME3060 before enrolling in this unit.

Note: Department permission required for enrolment

Semester 2
AMME5101
Energy and the Environment
6    A Students are expected to be familiar with the basic laws of thermodynamics, fluid mechanics and heat transfer
P MECH3260 OR MECH9260 or MECH8260 OR AERO3261 OR AERO9261 or AERO8261
Semester 1
AMME5202
Computational Fluid Dynamics
6    A Partial differential equations; Finite difference methods; Taylor series; Basic fluid mechanics including pressure, velocity, boundary layers, separated and recirculating flows. Basic computer programming skills.
Semester 1
AMME5271
Computational Nanotechnology
6    A Understanding of basic principles of Newtonian mechanics, physics and chemistry, fluid mechanics and solid mechanics.

Note: Department permission required for enrolment

Semester 2
AMME5292
Advanced Fluid Dynamics
6    A MECH3261 OR MECH9261 OR CIVL3612 OR CIVL9612 OR AERO3260 OR AERO9260
Semester 1
AMME5310
Engineering Tribology
6    A (AMME2302 OR AMME9302) AND (AMME2301 OR AMME9301) AND (MECH3261 OR MECH9261 or MECH8261)

Note: Department permission required for enrolment

Semester 1
AMME5510
Vibration and Acoustics
6    P (AMME2301 OR AMME9301) AND (AMME2200 OR AMME2261 OR AMME9261) AND (AMME2500 OR AMME9500)
Semester 2
AMME5520
Advanced Control and Optimisation
6    A Strong understanding of feedback control systems, specifically in the area of system modelling and control design in the frequency domain.
P AMME3500 OR AMME9501 or AMME8501
Semester 1
AMME5902
Computer Aided Manufacturing
6   
Note: Department permission required for enrolment

Semester 2
AMME5912
Crash Analysis and Design
6    A Computer Aided Drafting, Basic FEA principles and Solid Mechanics

Note: Department permission required for enrolment

Semester 1
BMET5958
Nanotechnology in Biomedical Engineering
6    A (MECH3921 OR BMET3921 OR AMME5921 OR BMET5921)
N AMME5958
Semester 2
BMET5995
Advanced Bionics
6    A AMME5921 OR BMET5921 OR MECH3921 OR BMET3921
N AMME5995 OR AMME5951 OR BMET5951
Semester 1
BMET9961
Biomechanics and Biomaterials
6    A AMME9901 or BMET9901 or 6 credit points of junior biology, 6 credit points of junior chemistry, 6 credit points of junior materials science, 6 credit points of engineering design, Chemistry, biology, materials engineering, and engineering design at least at the Junior level.
N AMME5961 OR AMME9961 OR MECH4961 OR BMET4961
Semester 2
BMET9971
Tissue Engineering
6    A AMME9901 or BMET9901 or [6 credit points of 1000-level biology and 6 credit points of 1000-level chemistry]
P (AMME5921 or BMET5921 OR BMET9921)
N AMME5971 OR AMME9971 OR AMME4971 OR BMET4971
Semester 1
BMET9981
Applied Biomedical Engineering
6    A AMME9301 AND AMME9302 AND AMME9500 AND MECH9361
N AMME4981 or BMET4981 OR AMME5981 OR AMME9981
Semester 1
BMET9990
Biomedical Product Development
6    A 1000 level chemistry, 2000 level biology, and specific knowledge of cell biology at least at the1000 level, and preferably at the 2000 level.
N AMME4990 OR BMET4990 OR AMME5990 OR AMME9990
Semester 1
CHNG5001
Process Systems Engineering
6    A 1000 level physics and mathematics (differential equations). Use of mathematical and/or computer-based modelling tools and techniques. Feedback control concepts and principles as taught in CHNG3802/CHNG9302 or similar courses. Students who are unsure about meeting these requirements should contact the unit coordinator for advice.


This unit of study is for Masters students and can be selected as an elective by 4th year students.
Semester 2
CHNG5003
Green Engineering
6    A Completion of 72 cp in science, engineering or equivalent.
Semester 2
CHNG5004
Particles and Surfaces
6    A Enrolment in this unit of study assumes that all 3000 level core chemical engineering units have been successfully completed.
Semester 1
CHNG5005
Wastewater Engineering
6    A Enrolment in this unit assumes that the studenthas successfully completed CHNG1103 (Mass and Energy Balances), CHNG2801 (Fluid Mechanics), CHNG2802 (Applied Mathematics), CHNG3803 (Chemical and Biological Process Design), CHNG3804 (Biochemical Engineering) and CHNG3805 (Particle Mechanics) or equivalent.
Semester 1
CHNG5006
Advanced Wastewater Engineering
6    A CHNG5005 OR CHNG3804.
Semester 2
CHNG5008
Nanotechnology in Chemical Engineering
6    A 12cp CHEM2xxx
Semester 2
CHNG5601
Membrane Science
6      Semester 1
CHNG5603
Advanced Process Modelling and Simulation
6    A It is assumed that students have a general knowledge of: (MATH1001 OR MATH1021) AND (MATH1003 OR MATH1023) AND (CHNG2802 OR MATH2XXX)


This course is for Master degree students and also is offered as an elective course for fourth year students. Some lectures my be given by a guest lecturer.
Semester 1
CHNG5604
Advanced Membrane Engineering
6    A CHNG5601
Semester 2
CHNG5605
Bio-Products: Laboratory to Marketplace
6   

This course is for Master degree students and also is offered as an elective course for fourth year students.
Semester 2
CHNG5606
Advanced Food Processing
6    A (CHNG2801 or AMME2261 or AMME2200 or CIVL2611 or CIVL3612 or CIVL9612) AND (CHNG2802 or AMME2000 or MATH2011 or MATH2061 or MATH2921)


This unit of study is for Masters students and can be selected as an elective by 4th year students.
Semester 2
CHNG5607
Advanced Biochemical Engineering
6    A CHNG2802 AND CHNG2806 AND CHNG3803 AND CHNG3804. Students who have not completed the units listed as assumed knowledge should consult the coordinator before enrolling in the course.

Note: Department permission required for enrolment
Students who have not completed the units listed as assumed knowledge should consult the coordinator before enrolling in the course.
Semester 1
CIVL5266
Steel Structures - Stability
6    A There are no prerequisites for this unit of study but it is assumed that students are competent in the content covered in Structural Mechanics, Steel Structures, and Structural Analysis.
Semester 1
CIVL5269
Advanced Concrete Structures
6    P CIVL3205 OR CIVL9205
Semester 2
CIVL5277
Structural Rehabilitation and Timber Design
6    A (CIVL2201 AND CIVL3205 AND CIVL3206) OR (CIVL9201 AND CIVL9205 AND CIVL9206)
Semester 2
CIVL5320
Engineering for Sustainable Development
6    P CIVL3310 OR CIVL9310
Semester 2
CIVL5351
Geoenvironmental Engineering
6      Semester 2
CIVL5452
Foundation Engineering
6    A [CIVL2410 OR CIVL9410] AND [CIVL3411 OR CIVL9411]. Students are assumed to have a good knowledge of fundamental soil mechanics, which is covered in the courses of soil mechanics (settlement, water flow, soil strength) and foundation engineering (soil models, stability analyses; slope stability; retaining walls; foundation capacity)
N CIVL6452
Semester 1
CIVL5453
Geotechnical Hazards
6    A (CIVL2410 AND CIVL3411) OR (CIVL9410 AND CIVL9411). Students are assumed to have a good knowledge of fundamental soil mechanics, which is covered in the courses of soil mechanics (settlement, water flow, soil strength) and foundation engineering (soil models, stability analyses; slope stability; retaining walls; foundation capacity).
Semester 2
CIVL5458
Numerical Methods in Civil Engineering
6      Semester 1
CIVL5460
Particle Mechanics for Geotechnics
6      Semester 1
CIVL5668
Fundamentals of Wind Engineering for Design
6      Semester 1
CIVL5670
Reservoir, Stream and Coastal Engineering
6    A (CIVL3612 OR CIVL9612) AND MATH2061
Semester 1
CIVL5999
Advanced Research and Analysis
6    A (CIVL2201 OR CIVL9201) AND (CIVL2611 OR CIVL9611) AND (CIVL2410 OR CIVL9410)
Semester 1
COMP5047
Pervasive Computing
6    A ELEC1601 AND (COMP2129 OR COMP2017). Background in programming and operating systems that is sufficient for the student to independently learn new programming tools from standard online technical materials.

Note: Department permission required for enrolment

Semester 2
COMP5347
Web Application Development
6    A COMP9220 or COMP5028. The course assumes basic knowledge on OO design and proficiency in a programming language
P INFO1103 or INFO1113 or COMP9103 or COMP9220 or COMP5028

Note: Department permission required for enrolment

Semester 1
COMP5348
Enterprise Scale Software Architecture
6    A Programming competence in Java or similar OO language. Capacity to master novel technologies (especially to program against novel APIs) using manuals, tutorial examples, etc.
Semester 1
COMP5416
Advanced Network Technologies
6    A ELEC3506 OR ELEC9506 OR ELEC5740 OR COMP5116
Semester 2
COMP5426
Parallel and Distributed Computing
6      Semester 1
CSYS5010
Introduction to Complex Systems
6      Semester 1
Semester 2
CSYS5020
Interdependent Civil Systems
6      Semester 1
ELEC5101
Antennas and Propagation
6      Semester 2
ELEC5203
Topics in Power Engineering
6    A ELEC3203 Power Engineering and ELEC3204 Power Electronics and Drives. Familiarity with basic mathematics and physics; competence with basic circuit theory and understanding of electricity grid equipment such as transformers, transmission lines and associated modeling; and fundamentals of power electronic technologies.
Semester 2
ELEC5204
Power Systems Analysis and Protection
6    A (ELEC3203 OR ELEC9203 OR ELEC5732) AND (ELEC3206 OR ELEC9206 OR ELEC5734). The unit assumes basic knowledge of circuits, familiarity with basic mathematics, competence with basic circuit theory and an understanding of three phase systems, transformers, transmission lines and associated modeling and operation of such equipment.
Semester 1
ELEC5205
High Voltage Engineering
6    A The following previous knowledge is assumed for this unit. Circuit analysis techniques, electricity networks, power system fundamentals.
P (ELEC3203 OR ELEC9203 OR ELEC5732) AND (ELEC3206 OR ELEC9206 OR ELEC5734)
Semester 2
ELEC5206
Sustainable Energy Systems
6    A Following concepts are assumed knowledge for this unit of study: familiarity with transformers, ac power, capacitors and inductors, electric circuits such as three-phase circuits and circuits with switches, and basic electronic circuit theory.
Semester 2
ELEC5207
Advanced Power Conversion Technologies
6    A ELEC3204
Semester 2
ELEC5208
Intelligent Electricity Networks
6    A Fundamentals of Electricity Networks, Control Systems and Telecommunications
Semester 1
ELEC5211
Power System Dynamics and Control
6    A The assumed knowledge for learning this UoS is a deep understanding on circuit analysis and its applications in power system steady state analysis.
P ELEC3203 OR ELEC9203 OR ELEC5732
Semester 1
ELEC5212
Power System Planning and Markets
6    A The assumed knowledge for learning this UoS is power system steady state analysis
P ELEC3203 or ELEC9203 OR ELEC5732
Semester 2
ELEC5304
Intelligent Visual Signal Understanding
6    A Mathematics (e.g. probability and linear algebra) and programming skills (e.g. Matlab/Java/Python/C++)
Semester 1
ELEC5306
Video Intelligence and Compression
6    A Basic understanding of digital signal processing (filtering, DFT) and programming skills (e.g. Matlab/Java/Python/C++)
Semester 1
ELEC5307
Advanced Signal Processing with Deep Learning
6    A Mathematics (e.g., probability and linear algebra) and programming skills (e.g. Matlab/Java/Python/C++)
Semester 2
ELEC5507
Error Control Coding
6    A Fundamental mathematics including probability theory and linear algebra. Basic knowledge on digital communications. Basic MATLAB programming skills is desired.
Semester 1
ELEC5508
Wireless Engineering
6    A Basic knowledge in probability and statistics, analog and digital communications, error probability calculation in communications channels, and telecommunications network.
Semester 2
ELEC5509
Mobile Networks
6    A ELEC3505 AND ELEC3506. Basically, students need to know the concepts of data communications and mobile communications, which could be gained in one the following units of study: ELEC3505 Communications, ELEC3506 Data Communications and the Internet, or similar units. If you are not sure, please contact the instructor.
Semester 1
ELEC5510
Satellite Communication Systems
6    A Knowledge of error probabilities, analog and digital modulation techniques and error performance evaluation studied in ELEC3505 Communications and ELEC4505 Digital Communication Systems, is assumed.
Semester 2
ELEC5511
Optical Communication Systems
6    A (ELEC3405 OR ELEC9405) AND (ELEC3505 OR ELEC9505). Basic knowledge of communications, electronics and photonics


-
Semester 1
ELEC5512
Optical Networks
6    A Knowledge of digital communications, wave propagation, and fundamental optics
Semester 2
ELEC5514
Networked Embedded Systems
6    A ELEC3305 AND ELEC3506 AND ELEC3607 AND ELEC5508
Semester 2
ELEC5516
Electrical and Optical Sensor Design
6    A Math Ext 1, fundamental concepts of signal and systems, fundamental electrical circuit theory and analysis
Semester 1
ELEC5517
Software Defined Networks
6    A ELEC3506 OR ELEC9506
Semester 2
ELEC5616
Computer and Network Security
6    A A programming language, basic maths.
Semester 1
ELEC5618
Software Quality Engineering
6    A Writing programs with multiple functions or methods in multiple files; design of complex data structures and combination in non trivial algorithms; use of an integrated development environment; software version control systems.
Semester 1
ELEC5619
Object Oriented Application Frameworks
6    A Java programming, and some web development experience are essential. Databases strongly recommended
Semester 2
ELEC5620
Model Based Software Engineering
6    A A programming language, basic maths.
Semester 2
ELEC5622
Signals, Software and Health
6      Semester 2
ELEC5701
Technology Venture Creation
6    N ENGG5102
Semester 2
INFO5010
IT Advanced Topic A
6   
Note: Department permission required for enrolment

Semester 1
Semester 2
INFO6010
Advanced Topics in IT Project Management
6    A Students are assumed to understand the role of IT projects.
P INFO6007 OR 3-5 years working experience in IT Project Management
Semester 2
INFS6004
Business Transformation Projects
6    A Understanding the major functions of a business and how those business functions interact internally and externally so the company can be competitive in a changing market. How Information Systems can be used and managed in a business. How to critically analyse a business and determine its options for transformation. Desirable Experience as a member of a project team.
Semester 1
MECH5255
Air Conditioning and Refrigeration
6    A Students are expected to be familiar with the basic laws of thermodynamics, fluid mechanics and heat transfer.
P MECH3260 OR MECH9260 or MECH8260
N MECH4255
Semester 2
MECH5265
Combustion
6    A Students are expected to be familiar with the basic laws of thermodynamics, fluid mechanics and heat transfer.
P (MECH3260 AND MECH3261) OR MECH9260 or MECH8260
Semester 2
MECH5275
Renewable Energy
6    A The student will need a sound background in advanced level fluid mechanics, thermodynamics and heat transfer. In particular, students should be able to analyse fluid flow in turbomachinery; perform first and second law thermodynamic analysis of energy conversion systems, including chemically reacting systems; and perform advanced level calculations of conductive and convective and radiative heat transfer, including radiative spectral analysis.
P (MECH3260 AND MECH3261) OR (AERO3260 AND AERO3261) OR (MECH9260 AND MECH9261) OR (MECH8260 and MECH8261) OR (AERO9260 AND AERO9261) OR (AERO8260 and AERO8261). Students claiming to have prerequisite knowledge based on study at other institutions must contact the unit of study coordinator before enrolling in this unit and may be required to sit a pre-exam to demonstrate that they have the necessary knowledge and skills to undertake this advanced level unit.

Note: Department permission required for enrolment

Semester 2
MECH5304
Materials Failure
6    A Fundamental knowledge in materials science and engineering: 1) atomic and crystal structures 2) metallurgy 3) structure-property relationship 4) mechanics of engineering materials 5) solid mechanics
P (MECH9361 OR MECH3361 or MECH8361) AND (MECH9362 or MECH8362 OR MECH3362)
Semester 2
MECH5305
Smart Materials
6    A Fundamental knowledge in materials science and engineering: 1) atomic and crystal structures 2) metallurgy 3) structure-property relationship 4) mechanics of engineering materials 5) solid mechanics
P (AMME9301 OR AMME2301) AND (AMME9302 OR AMME2302 OR AMME1362)
Semester 2
MECH5310
Advanced Engineering Materials
6    P MECH3362 OR MECH9362 or MECH8362
N MECH4310
Semester 1
MECH5311
Microscopy and Microanalysis of Materials
6    A AMME1362 or AMME9302 or CIVL2110.
Semester 1
MECH5416
Advanced Design and Analysis
6    A ENGG1802 or AMME1802 - Eng Mechanics; balance of forces and moments; AMME2301 - Mechanics of Solids; 2 and 3 dimensional stress and strain; AMME2500 - Engineering Dynamics - dynamic forces and moments; MECH2400 - Mechanical Design 1; approach to design problems and report writing; and preparation of engineering drawing; MECH3460 - Mechanical design 2; means of applying fatigue analysis to a wide range of machine components.
P (AMME2301 OR AMME9301) AND (AMME2500 OR AMME9500) AND (MECH2400 OR MECH9400)
N MECH4460
Semester 1
MECH5720
Sensors and Signals
6    A Strong MATLAB skills
P MTRX3700
N MECH4720
Semester 2
MTRX5700
Experimental Robotics
6    A Knowledge of statics and dynamics, rotation matrices, programming and some electronic and mechanical design experience is assumed.
P (AMME3500 OR AMME9501 or AMME8501) AND MTRX3700
Semester 1

For more information on degree program requirements visit CUSP (https://cusp.sydney.edu.au).