Skip to main content

We are aiming for an incremental return to campus in accordance with guidelines provided by NSW Health and the Australian Government. Until this time, learning activities and assessments will be planned and scheduled for online delivery where possible, and unit-specific details about face-to-face teaching will be provided on Canvas as the opportunities for face-to-face learning become clear.

Unit of study_

AMME5104: Applied Safety Systems and Risk Analysis

AMME5104 aims to extend the knowledge and skills of students who have completed the prerequisite unit of study, "ENGG5103 - Safety Systems and Risk Analysis"; building on the foundation material introduced in that unit of study. The effective management of workplace safety systems using Australian/New Zealand standards AS/NZS 4801/4804 is discussed and applied to typical engineering scenarios; some common international approaches and systems are also covered, though to a smaller extent. Processes and procedures related to the creation of risk assessments and analyses are explored, as related to common engineering disciplines. Systems and processes used to perform Hazard and Operability (Hazop) studies are introduced, alongside computational probability based risk quantification procedures. Methods to audit and monitor the performance of safety management systems are discussed, with a focus on the use of lead indicators. Various incident investigation techniques are examined, in conjunction with safety auditing systems. The classification and management of hazardous materials is addressed, with reference to legislative requirements. The importance of a positive workplace safety culture, and issues related to human factors in safety management are also studied and techniques to promote a strong safety culture explored. The unit of study incorporates the use of various real world case studies, from a variety of different engineering disciplines.

Details

Academic unit Aerospace, Mechanical and Mechatronic
Unit code AMME5104
Unit name Applied Safety Systems and Risk Analysis
Session, year
? 
Semester 1, 2020
Attendance mode Normal day
Location Camperdown/Darlington, Sydney
Credit points 6

Enrolment rules

Prohibitions
? 
None
Prerequisites
? 
ENGG5103. Knowledge of basic safety systems.
Corequisites
? 
None
Available to study abroad and exchange students

Yes

Teaching staff and contact details

Coordinator Rod Fiford, rod.fiford@sydney.edu.au
Type Description Weight Due Length
Participation Active participation in class and online
5% - n/a
Outcomes assessed: LO2 LO3 LO5 LO6 LO7
Final exam Examination
Students must pass the exam (50% or above) to pass the unit of study.
40% Formal exam period 2 hours
Outcomes assessed: LO1 LO2 LO4 LO6 LO7
Assignment International safety management standards report
n/a
10% Week 06
Due date: 05 Apr 2020
n/a
Outcomes assessed: LO1 LO2 LO4 LO5 LO6
Assignment group assignment Risk assessment and safe work procedure analysis
20% Week 09
Due date: 03 May 2020
n/a
Outcomes assessed: LO1 LO6 LO5 LO4 LO3
Assignment Industrial safety management case study
25% Week 13
Due date: 31 May 2020
n/a
Outcomes assessed: LO1 LO7 LO6 LO5 LO4 LO2
group assignment = group assignment ?

Detailed information for each assessment can be found on Canvas.

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2014 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name

Mark range

Description

High distinction

85 - 100

 

Distinction

75 - 84

 

Credit

65 - 74

 

Pass

50 - 64

 

Fail

0 - 49

When you don’t meet the learning outcomes of the unit to a satisfactory standard.

For more information see sydney.edu.au/students/guide-to-grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

  • Deduction of 5% of the maximum mark for each calendar day after the due date.
  • After ten calendar days late, a mark of zero will be awarded.

Special consideration

If you experience short-term circumstances beyond your control, such as illness, injury or misadventure or if you have essential commitments which impact your preparation or performance in an assessment, you may be eligible for special consideration or special arrangements.

Academic integrity

The Current Student website provides information on academic honesty, academic dishonesty, and the resources available to all students.

The University expects students and staff to act ethically and honestly and will treat all allegations of academic dishonesty or plagiarism seriously.

We use similarity detection software to detect potential instances of plagiarism or other forms of academic dishonesty. If such matches indicate evidence of plagiarism or other forms of dishonesty, your teacher is required to report your work for further investigation.

WK Topic Learning activity Learning outcomes
Week 01 Course introduction and background, revision of ENGG5103 Lecture and tutorial (4 hr)  
Week 02 Legislative requirements including some international systems and standards Lecture and tutorial (4 hr)  
Week 03 Advanced risk assessment/analysis techniques Lecture and tutorial (4 hr)  
Week 04 Safety implementation, JSA, SWMS and other procedures Lecture and tutorial (4 hr)  
Week 05 Failure modes and effects analysis, fault tree analysis Lecture and tutorial (4 hr)  
Week 06 Hazardous materials and processes Lecture and tutorial (4 hr)  
Week 07 Human factors - ergonomics Lecture and tutorial (4 hr)  
Week 08 Hazard and operability processes (HAZOPS) Lecture and tutorial (4 hr)  
Week 09 Incident investigation and review Lecture and tutorial (4 hr)  
Week 10 Safety and reliability of engineering processes Lecture and tutorial (4 hr)  
Week 11 Monitoring, auditing and control of safety systems and processes Lecture and tutorial (4 hr)  
Week 12 The importance of positive safety cultures within work places Lecture and tutorial (4 hr)  
Week 13 Course revision, exam preparation Lecture and tutorial (4 hr)  

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University’s graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

  • LO1. make informed decisions based on advanced risk analysis processes
  • LO2. understand human factors and their impact on safety management processes
  • LO3. undertake team based discussions within class and online in discussion/collaboration forums
  • LO4. write effective technical engineering reports related to safety systems and risk analysis
  • LO5. independently source information related to legislative requirements, industry codes of practice etc
  • LO6. demonstrate knowledge and understanding of safety and risk management systems
  • LO7. apply quantitative risk analysis processes and techniques.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1 Depth of disciplinary expertise

Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.

GQ2 Critical thinking and problem solving

Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.

GQ3 Oral and written communication

Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.

GQ4 Information and digital literacy

Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.

GQ5 Inventiveness

Generating novel ideas and solutions.

GQ6 Cultural competence

Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.

GQ7 Interdisciplinary effectiveness

Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.

GQ8 Integrated professional, ethical, and personal identity

An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.

GQ9 Influence

Engaging others in a process, idea or vision.

Outcome map

Learning outcomes Graduate qualities
GQ1 GQ2 GQ3 GQ4 GQ5 GQ6 GQ7 GQ8 GQ9

Students must pass the exam (50% or above) to pass the unit.

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.