BMET5010: Semester 2, 2020

University home

Library

Current students

Staff intranet

Find an event

Give

Current students

Units BMET5010 Semester 2 2020 [Supervision]

Unit of study_

BMET5010: Major Industrial Project

Semester 2, 2020 [Supervision] - Camperdown/Darlington, Sydney

Overview

Students spend 6 months at an industrial placement working on a major engineering project relevant to their engineering stream. This is a 24 credit point unit, which may be undertaken as an alternative to ENGG5217 Practical Experience, BMET5020/5021 Capstone Project A and B and 12cp of specialist electives. This unit of study gives students experience in carrying out a major project within an industrial environment, and in preparing and presenting detailed technical reports (both oral and written) on their work. The project is carried out under joint University/industry supervision, with the student essentially being engaged full-time on the project at the industrial site.

Unit details and rules

Unit code	BMET5010
Academic unit	Biomedical Engineering
Credit points	24
Prohibitions ?	BMET5020 or BMET5021 or BMET5022 or BMET5222 or BMET5223 or ENGG5217 or AMME5020 or AMME5020 or AMME5021 or AMME5022 or AMME5222 or AMME5223 or AMME5010
Prerequisites ?	[A credit (WAM>=65) average in prior semester enrolment.]
Corequisites ?	None
Assumed knowledge ?	None
Available to study abroad and exchange students	No

Teaching staff

Coordinator	Gregg Suaning, gregg.suaning@sydney.edu.au

Type	Description	Weight	Due	Length
Skills-based evaluation	Thesis Seminar School Seminar Presentation - date will be advised.	5%	-	5-minute presentation (+ questions)
Outcomes assessed:
Skills-based evaluation	Exit Seminar Thesis presentation to company - date to be advised.	5%	-	Company specific
Outcomes assessed:
Assignment	Progress Report Literature review and report on progress - submission date to be advised.	10%	-	Variable
Outcomes assessed:
Honours thesis	Thesis Report Thesis report - date to be advised.	80%	Week 13	Refer to Canvas guidelines
Outcomes assessed:

Assessment summary

10% Progress Report
5% Thesis Exit Seminar
5% Thesis Seminar
80% Thesis Report

Assessment criteria

Refer to Canvas for guidelines.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

Deduction of 5% of the maximum mark for each calendar day after the due date.
After ten calendar days late, a mark of zero will be awarded.

This unit has an exception to the standard University policy or supplementary information has been provided by the unit coordinator. This information is displayed below:

5% per day

Academic integrity

The Current Student website provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

You may only use artificial intelligence and writing assistance tools in assessment tasks if you are permitted to by your unit coordinator, and if you do use them, you must also acknowledge this in your work, either in a footnote or an acknowledgement section.

Studiosity is permitted for postgraduate units unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission.

Learning support

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

Weekly schedule

WK	Topic	Learning activity	Learning outcomes

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 24 credit point unit, this equates to roughly 480-600 hours of student effort in total.

Learning outcomes

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

Outcomes
Graduate qualities

At the completion of this unit, you should be able to:

LO1. Ability to document and report research work undertaken in a format appropriate for academic literature with correct referencing.
LO2. Ability to deliver a research presentation that is clear, confident and engaging to an academic audience.
LO3. Ability to formulate and plan a personal research project.
LO4. Originality, ingenuity and initiative in dealing with critical research issues.
LO5. In-depth knowledge of a specialised area within the discipline.
LO6. Ability to formulate an appropriate method for investigating a specific research question.
LO7. Ability to analyse data, draw appropriate conclusions and present those conclusions in context, with due consideration of methods and assumptions involved.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1	Depth of disciplinary expertise Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.
GQ2	Critical thinking and problem solving Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.
GQ3	Oral and written communication Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.
GQ4	Information and digital literacy Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.
GQ5	Inventiveness Generating novel ideas and solutions.
GQ6	Cultural competence Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.
GQ7	Interdisciplinary effectiveness Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.
GQ8	Integrated professional, ethical, and personal identity An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.
GQ9	Influence Engaging others in a process, idea or vision.

Outcome map

Learning outcomes	Graduate qualities
Learning outcomes

Responding to student feedback

This section outlines changes made to this unit following staff and student reviews.

N/A

Additional information

Work, health and safety

All research work must be completed in accordance with Company, School, Faculty and University WHS policies. This includes:
- Completing appropriate lab inductions before commencing lab-based work
- Where applicable, completing a risk assessment before commencing experimental work
Ensure that you discuss all WHS-specific aspects of your project with your supervisor at the outset.

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.

Current students

Overview

Overview

Unit details and rules

Teaching staff

Assessment

Assessment

Assessment summary

Assessment criteria

Late submission

Academic integrity

Learning support

Learning support

Simple extensions

Special consideration

Using AI responsibly

Weekly schedule

Weekly schedule

Study commitment

Learning outcomes

Learning outcomes

Graduate qualities

Outcome map

Responding to student feedback

Responding to student feedback

Additional information

Additional information

Work, health and safety

Disclaimer

On this page

Useful links

Media

Student links

About us

Connect