Skip to main content
Unit of study_

GEOS2911: Natural Hazards: A GIS Approach (Adv)

Semester 1, 2020 [Normal day] - Camperdown/Darlington, Sydney

This unit has the same objectives as GEOS2111 and is suitable for students who wish to pursue aspects of the subject in greater depth. Entry is restricted and selection is made from the applicants on the basis of their performance to date. Students who elect to take this unit will participate in alternatives to some aspects of the standard unit and will be required to pursue independent work to meet unit objectives.

Unit details and rules

Unit code GEOS2911
Academic unit Geosciences Academic Operations
Credit points 6
Prohibitions
? 
GEOS2111
Prerequisites
? 
A mark of 75 in a 6 credit point Junior Geosciences unit of study
Corequisites
? 
None
Assumed knowledge
? 

None

Available to study abroad and exchange students

Yes

Teaching staff

Coordinator Dale Dominey-Howes, dale.dominey-howes@sydney.edu.au
Type Description Weight Due Length
Final exam Final exam
Written exam with 10 minutes reading time
40% Formal exam period 2 hours
Outcomes assessed: LO1 LO2 LO3 LO4 LO5 LO6 LO8
Assignment National Geographic article
Written task
40% Mid-semester break
Due date: 17 Apr 2020 at 12:00
3000 words
Outcomes assessed: LO2 LO7 LO5 LO4
Assignment Earthquake assignment OR Bushfire assignment*
Written task - Earthquake due wk 10, Bushfire due wk 13
20% Multiple weeks See Canvas
Outcomes assessed: LO2 LO7

Assessment summary

Detailed information for each assessment can be found on Canvas.

* NOTE – students in GEOS2911 need ONLY do either assignment 2 OR assignment 3 (not both). The choice is up to each student

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2014 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name

Mark range

Description

High distinction

85 - 100

At HD level, a student demonstrates a flair for the subject as well as a detailed and comprehensive understanding of the unit material. A ‘High Distinction’ reflects exceptional achievement and is awarded to a student who demonstrates the ability to apply their subject knowledge and understanding to produce original solutions for novel or highly complex problems and/or comprehensive critical discussions of theoretical concepts.

Distinction

75 - 84

At DI level, a student demonstrates an aptitude for the subject and a well-developed understanding of the unit material. A ‘Distinction’ reflects excellent achievement and is awarded to a student who demonstrates an ability to apply their subject knowledge and understanding of the subject to produce good solutions for challenging problems and/or a reasonably well-developed critical analysis of theoretical concepts.

Credit

65 - 74

At CR level, a student demonstrates a good command and knowledge of the unit material. A ‘Credit’ reflects solid achievement and is awarded to a student who has a broad general understanding of the unit material and can solve routine problems and/or identify and superficially discuss theoretical concepts.

Pass

50 - 64

At PS level, a student demonstrates proficiency in the unit material. A ‘Pass’ reflects satisfactory achievement and is awarded to a student who has threshold knowledge.

Fail

0 - 49

When you don’t meet the learning outcomes of the unit to a satisfactory standard.

For more information see sydney.edu.au/students/guide-to-grades.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

  • Deduction of 5% of the maximum mark for each calendar day after the due date.
  • After ten calendar days late, a mark of zero will be awarded.

Academic integrity

The Current Student website  provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.  

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

You may only use artificial intelligence and writing assistance tools in assessment tasks if you are permitted to by your unit coordinator, and if you do use them, you must also acknowledge this in your work, either in a footnote or an acknowledgement section.

Studiosity is permitted for postgraduate units unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission.

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

WK Topic Learning activity Learning outcomes
Multiple weeks Exploration of foundational concepts and theories related to hazards and disasters Lecture (2 hr) LO1 LO2
Module covering multiple atmospheric and weather related hazards Lecture (2 hr) LO1 LO4 LO6
Module exploring multiple types of geological hazards and disasters Lecture (2 hr) LO1 LO3 LO6
Module examining various biological hazards and their associated disasters Lecture (2 hr) LO1 LO2 LO4
Module exploring types and uses of GIS and other spatial sciences to support analysis of hazards and disasters Lecture (2 hr) LO5 LO8
Module explores approaches to hazard and disaster risk management and disaster resilience Lecture (2 hr) LO2 LO5
Week 01 Unit introduction, teaching philosophy, expectations and assessment tasks Lecture (1 hr)  
Week 13 Unit wrap up, exam prep and revision Lecture (1 hr)  
Weekly Practical classes will explore core aspects of the study of hazards and disasters using various case studies and software systems Practical (2 hr) LO2

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Required readings

Specific, dedicated readings for this unit can be accessed through the weekly modules in the Canvas site for this unit. Students are
also advised to read more widely in support of their learning for this Unit of Study

  • There is NO prescribed textbook for GEOS2111/2911. However, the University Library holds a number of hard copy and electronic books that are of value in supporting this unit.
  • The University holds a variety of full-text journals on-line. You are REQUIRED to consult journals as much as possible. You may find the following journals particularly helpful. Please note this is just an indicative list – many more relevant journals are also available:
    • Science; Nature; Disasters; Nature Geoscience; Natural Hazards; The Australian Journal of Emergency Management; Bulleting of Volcanology; Journal of Volcanology and Geothermal Research; Bulletin of the Seismological Society of America; Disaster Prevention and Management; Environmental Hazards; Natural Hazards and Earth System Sciences

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

  • LO1. classify the earth systems together with associated relevant natural hazard types
  • LO2. critically understand the core concepts underpinning the discipline field of natural hazards and disaster risk reduction
  • LO3. explain how concepts of vulnerability, resilience, risk and adaptive capacity interact to determine disaster losses (or not) in a particular situation or context
  • LO4. review and comment upon the causes, processes and effects of selected natural hazard types
  • LO5. describe and discuss the various approaches to disaster risk reduction and management
  • LO6. provide a range of examples to illustrate your knowledge from high, medium and low-income countries
  • LO7. present a detailed piece of personal research in an appropriate written format (e.g., report, newspaper article etc)
  • LO8. apply spatial analysis as a mechanism for assessing hazard risk and vulnerability.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1 Depth of disciplinary expertise

Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.

GQ2 Critical thinking and problem solving

Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.

GQ3 Oral and written communication

Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.

GQ4 Information and digital literacy

Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.

GQ5 Inventiveness

Generating novel ideas and solutions.

GQ6 Cultural competence

Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.

GQ7 Interdisciplinary effectiveness

Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.

GQ8 Integrated professional, ethical, and personal identity

An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.

GQ9 Influence

Engaging others in a process, idea or vision.

Outcome map

Learning outcomes Graduate qualities
GQ1 GQ2 GQ3 GQ4 GQ5 GQ6 GQ7 GQ8 GQ9

This section outlines changes made to this unit following staff and student reviews.

No changes have been made since this unit was last offered.

Work, health and safety

We are governed by the Work Health and Safety Act 2011, Work Health and Safety Regulation 2011 and Codes of Practice. Penalties for non-compliance have increased. Everyone has a responsibility for health and safety at work. The University’s Work Health and Safety policy explains the responsibilities and expectations of workers and others, and the procedures for managing WHS risks associated with University activities.

General Laboratory Safety Rules

  • No eating or drinking is allowed in any laboratory under any circumstances 
  • A laboratory coat and closed-toe shoes are mandatory 
  • Follow safety instructions in your manual and posted in laboratories 
  • In case of fire, follow instructions posted outside the laboratory door 
  • First aid kits, eye wash and fire extinguishers are located in or immediately outside each laboratory 
  • As a precautionary measure, it is recommended that you have a current tetanus immunisation. This can be obtained from University Health Service: unihealth.usyd.edu.au/

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.