Outline

Overview

This unit introduces the complexity of host-microbial interactions, advanced oral physiology and related oral facial dysfunction, and oral pathobiology of common dental and oral conditions to support understanding of the clinical disciplines.

Unit details and rules

Academic unit	Department of Medical Sciences
Credit points	6
Prerequisites ?	ORHL1104 and ORHL1204 and ORHL2104
Corequisites ?	ORHL2201 and ORHL2202
Prohibitions ?	None
Assumed knowledge ?	None
Available to study abroad and exchange students	Yes

Teaching staff

Coordinator	Filip Vujovic, filip.vujovic@sydney.edu.au
Lecturer(s)	Babak Sarrafpour, babak.sarrafpour@sydney.edu.au
Lecturer(s)	Filip Vujovic, filip.vujovic@sydney.edu.au
Tutor(s)	Munira Xaymardan, munira.xaymardan@sydney.edu.au
	Tihana Divnic-Resnik, tihana.divnic-resnik@sydney.edu.au
	Christina Adler, christina.adler@sydney.edu.au

Type	Description	Weight	Due	Length
Presentation	Student led conference (ORHL2204) Online delivery	20%	-	15 minutes
Outcomes assessed:
Assignment	Summative Written Reports (ORHL2204) Portfolio	20%	-	n/a
Outcomes assessed:
Final exam (Take-home extended release)	Final Summative Written Exam (ORHL2204) Written exam	30%	Formal exam period	48 hours
Outcomes assessed:
Online task	Stage 1 examination (ORHL2204) Written exam	10%	Week 01	30 minutes
Outcomes assessed:
Online task	Stage 2 examination (ORHL2204) Written exam	10%	Week 05	30 minutes
Outcomes assessed:
Online task	Stage 3 examination (ORHL2204) Written exam	10%	Week 10	30 minutes
Outcomes assessed:
= hurdle task ? = group assignment ? = Type E final exam ?

Assessment summary

Detailed information for each assessment can be found on Canvas.

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2014 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name	Mark range	Description
High distinction	85 - 100	Awarded when you demonstrate the learning outcomes for the unit at an exceptional standard, as defined by grade descriptors or exemplars outlined by your faculty or school.
Distinction	75 - 84	Awarded when you demonstrate the learning outcomes for the unit at a very high standard, as defined by grade descriptors or exemplars outlined by your faculty or school.
Credit	65 - 74	Awarded when you demonstrate the learning outcomes for the unit at a good standard, as defined by grade descriptors or exemplars outlined by your faculty or school.
Pass	50 - 64	Awarded when you demonstrate the learning outcomes for the unit at an acceptable standard, as defined by grade descriptors or exemplars outlined by your faculty or school.
Fail	0 - 49	When you don’t meet the learning outcomes of the unit to a satisfactory standard.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

Deduction of 5% of the maximum mark for each calendar day after the due date.
After ten calendar days late, a mark of zero will be awarded.

Academic integrity

The Current Student website provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

Use of generative artificial intelligence (AI) and automated writing tools

You may only use generative AI and automated writing tools in assessment tasks if you are permitted to by your unit coordinator. If you do use these tools, you must acknowledge this in your work, either in a footnote or an acknowledgement section. The assessment instructions or unit outline will give guidance of the types of tools that are permitted and how the tools should be used.

Your final submitted work must be your own, original work. You must acknowledge any use of generative AI tools that have been used in the assessment, and any material that forms part of your submission must be appropriately referenced. For guidance on how to acknowledge the use of AI, please refer to the AI in Education Canvas site.

The unapproved use of these tools or unacknowledged use will be considered a breach of the Academic Integrity Policy and penalties may apply.

Studiosity is permitted unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission as detailed on the Learning Hub’s Canvas page.

Outside assessment tasks, generative AI tools may be used to support your learning. The AI in Education Canvas site contains a number of productive ways that students are using AI to improve their learning.

Learning support

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

Weekly schedule

WK	Topic	Learning activity
Week -01	Probiotics in dentistry (microbiology)	Lecture (1 hr)
	Biomineralisation (histology)	Lecture (1 hr)
	Fungal infections in dentistry (microbiology)	Lecture (1 hr)
Week -02	Introduction to dental developmental defects	Online class (1 hr)
	Periodontal pathogens and systemic disease (microbiology)	Lecture (1 hr)
	Assignment introduction	Tutorial (1 hr)
Week -03	Feedback and introduction	Tutorial (1.5 hr)
Week 01	Review dental developmental defects part 1 (pathology) (CPEBL tutorial)	Tutorial (2 hr)
	Review dental developmental defects part 2 (pathology) (CPEBL tutorial)	Tutorial (2 hr)
	Assignment: poster design and exemplar	Tutorial (1 hr)
Week 02	Oral viral infections	Lecture (1 hr)
Week 02	Introduction to pulpal and periapical infection (pathology)	Online class (2 hr)
Week 03	Spread of infection (anatomy)	Lecture (1 hr)
	Saliva composition (physiology)	Lecture (1 hr)
	Saliva production (physiology)	Lecture (1 hr)
Week 04	Review pulpal and periapical infection (pathology) (CPEBL tutorial)	Tutorial (2 hr)
	Introduction to odontogenic cysts (pathology)	Online class (1 hr)
	Taste and smell (physiology)	Lecture (1 hr)
Week 05	Assignment: update and feedback	Tutorial (1 hr)
Week 05	Review odontogenic cysts (pathology) (CPEBL tutorial)	Tutorial (2 hr)
Week 06	Introduction to mucosal infections (pathology)	Online class (1 hr)
Week 07	Antibiotics prophylaxis (pharmacotherapeutics)	Lecture (1 hr)
Week 07	Mastication and swallowing (physiology)	Lecture (1 hr)
Week 08	Review mucosal infections (pathology) (CPEBL tutorial)	Lecture (1 hr)
	Introduction to mucosal disease (pathology)	Online class (1 hr)
	TMJ disorders (physiology)	Lecture (1 hr)
Week 09	Orofacial pain (physiology)	Lecture (1 hr)
Week 09	Obstructive sleep apnoea (physiology)	Lecture (1 hr)
Week 10	Review mucosal disease (pathology) (CPEBL lecture)	Tutorial (2 hr)
Week 11	Analgesics (pharmacotherapeutics)	Lecture (1 hr)
Week 11	Steroids in dentistry (pharmacotherapeutics)	Lecture (1 hr)
Week 12	Mercury toxicity (physiology)	Lecture (1 hr)
Week 12	Colour science in dentistry (physiology)	Lecture (1 hr)
Week 13	Life science review	Tutorial (1.5 hr)

Attendance and class requirements

Attendance: Attendance is a professional responsibility required of all students admitted to academic programs within the Sydney Dental School. All programs in the Sydney Dental School have a 90% attendance policy, for all compulsory components of Units of Study, as detailed in the Faculty of Dentistry Attendance Provisions 2015. This includes all clinical and practical sessions. The course requirements cannot be satisfied if more than 10% of any section of a course is missed for any reason.
Professionalism: Students in all Sydney Dental School programs are subject to the Faculty of Medicine and Health Professionalism Requirements 2019 and the Faculty of Medicine and Health Professionalism Provisions 2019. Professionalism is an essential component of developing competency to practice. It is important for students to demonstrate professional behaviour in all contexts and environments. In accordance with these local provisions: candidates who demonstrate serious or repeated unprofessional behaviour may be required to show cause as to why their enrolment should be continued. Failure to show cause may result in exclusion from the course.

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Learning outcomes

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

LO1. understand the essential foundational level of knowledge of common medical conditions and systemic diseases related to adult scope practice, including pathophysiology, signs and symptoms, basic laboratory findings, and oral manifestations
LO2. determine the impact of risk factors, systemic disease and medications on oral health and treatment planning
LO3. understand the principles of pharmacology, the implications, risks and limitations in using therapeutic agents relevant to oral health practice
LO4. locate, analyse and apply scientific evidence in a critical manner to understand oral biosciences.
LO5. understand the pathobiology of common oral and dental conditions
LO6. understand the microbiology of common oral infections and the microbiology link between periodontal disease and systemic disease
LO7. understand the principles of pharmacology, the implications, risks and limitations in using therapeutic agents relevant to oral health practice
LO8. understand the principles of oral structures related pathophysiology of oral facial dysfunction

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1	Depth of disciplinary expertise Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.
GQ2	Critical thinking and problem solving Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.
GQ3	Oral and written communication Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.
GQ4	Information and digital literacy Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.
GQ5	Inventiveness Generating novel ideas and solutions.
GQ6	Cultural competence Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.
GQ7	Interdisciplinary effectiveness Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.
GQ8	Integrated professional, ethical, and personal identity An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.
GQ9	Influence Engaging others in a process, idea or vision.

Outcome map

Learning outcomes	Graduate qualities
Learning outcomes

Alignment with Competency standards

Outcomes	Competency standards
	Professional Competencies of the Newly Qualified Dental Hygienist, Dental Therapist and Oral Health Therapist (2016) - 1.4. recognise professional and individual scopes of practice 1.5. recognise the importance of continuing professional development for all members of the dental team 5.1. understand the biological, physical and behavioural sciences in relation to oral health and disease 6.1.3. select necessary clinical, pathology and other diagnostic procedures and interpret results 6.2.2. diagnose disease or abnormalities of the dentition, mouth and associated structures and identify conditions which require management 6.2.5. determine when and how to refer patients to the appropriate health professional 6.3.4. manage oral conditions and diseases, pain and pathology of the dentition, mouth and associated structures
	Professional Competencies of the Newly Qualified Dental Hygienist, Dental Therapist and Oral Health Therapist (2016) - 3.1. locate and evaluate evidence in a critical and scientific manner to support oral health care 3.3. understand scientific method and the role of research in advancing knowledge and clinical practice 4.1. understand the determinants of health, risk factors and behaviours that influence health 5.1. understand the biological, physical and behavioural sciences in relation to oral health and disease 5.3. understand the scientific principles and application of infection prevention and control 6.2.3. determine the impact of risk factors, systemic disease and medications on oral health and treatment planning
	Professional Competencies of the Newly Qualified Dental Hygienist, Dental Therapist and Oral Health Therapist (2016) - 5.1. understand the biological, physical and behavioural sciences in relation to oral health and disease 5.6. understand the principles of pharmacology and the risks in using therapeutic agents 6.3.6. administer pharmaceutical agents 6.3.9. manage medical emergencies
	Professional Competencies of the Newly Qualified Dental Hygienist, Dental Therapist and Oral Health Therapist (2016) - 5.1. understand the biological, physical and behavioural sciences in relation to oral health and disease 6.1.1. obtain and record a relevant history of the patient’s medical, social and oral health status 6.1.2. perform an examination for health, disease and abnormalities of the dentition, mouth and associated structures 6.1.5. evaluate individual patient risk factors for oral disease 6.3.4. manage oral conditions and diseases, pain and pathology of the dentition, mouth and associated structures
	Professional Competencies of the Newly Qualified Dental Hygienist, Dental Therapist and Oral Health Therapist (2016) - 1.4. recognise professional and individual scopes of practice 1.5. recognise the importance of continuing professional development for all members of the dental team 3.1. locate and evaluate evidence in a critical and scientific manner to support oral health care 3.2. apply clinical reasoning and judgement in a reflective approach to oral health care 3.3. understand scientific method and the role of research in advancing knowledge and clinical practice 5.1. understand the biological, physical and behavioural sciences in relation to oral health and disease

Responding to student feedback

This section outlines changes made to this unit following staff and student reviews.

No changes have been made since this unit was last offered.

Additional information

Work, health and safety

Students must comply with work health and safety, infection control and dress standard policies of all laboratories, placement sites and Local Health Districts (LHDs).

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.

Current students

Overview

Overview

Unit details and rules

Teaching staff

Assessment

Assessment

Assessment summary

Assessment criteria

Late submission

Academic integrity

Learning support

Learning support

Simple extensions

Special consideration

Using AI responsibly

Weekly schedule

Weekly schedule

Attendance and class requirements

Study commitment

Learning outcomes

Learning outcomes

Graduate qualities

Outcome map

Alignment with Competency standards

Responding to student feedback

Responding to student feedback

Additional information

Additional information

Work, health and safety

Disclaimer

On this page

Useful links

ORHL2204: Life Sciences IV

Semester 2, 2022 [Normal day] - Westmead, Sydney

Overview

Overview

Unit details and rules

Teaching staff

Assessment

Assessment

Assessment summary

Assessment criteria

Late submission

Academic integrity

Learning support

Learning support

Simple extensions

Special consideration

Using AI responsibly

Weekly schedule

Weekly schedule

Attendance and class requirements

Study commitment

Learning outcomes

Learning outcomes

Graduate qualities

Outcome map

Alignment with Competency standards

Responding to student feedback

Responding to student feedback

Additional information

Additional information

Work, health and safety

Disclaimer

On this page

Useful links