Skip to main content
Unit outline_

PLAN9018: Planning Report

Semester 1, 2022 [Normal evening] - Remote

The planning report is a substantial piece of research conducted over one semester. It takes the form of report (between 10,000 and 12,000 words) on an approved urban and regional planning subject of your choice and/or maybe based on a priority thematic topic agreed with a local Council in the Sydney metropolitan area. You will be required to participate in a small number of relevant studios / meetings in developing and presenting this work. For example, in 2013, planning report topics evolved out of forum with officers from Liverpool City Council, for example, and were subsequently presented to Council officers at the end of semester. The objective of the planning report is therefore to advance your knowledge and analytical skills in a particular relevant and topical area and so develop a "professional edge" in a real world planning situation. The expected learning outcomes of the report include the ability to: think critically about a planning problem and develop an appropriate research methodology or analytical approach to address it; identify and access appropriate sources of information, research and literature relevant to urban and regional planning issues; undertake primary and secondary research relevant to problems in planning practice; present your findings in a way that demonstrates academic and professional competence. A planning report generally includes: a literature review to delineate a planning problem, concern or gap in knowledge; a statement of research aims or objectives, as well as research questions; an explanation of research methods; presentation and analysis of data; discussion of conclusions. Permission to continue the Planning Report is subject to a satisfactory research proposal which must be approved by your supervisor as per the Unit of Study outline timeline. Supervisors from the URP program are allocated at the end of week 1 of semester and students work with their supervisors on an agreed timetable throughout semester. Planning reports are due at the end of the first week of exams for the semester in which you are enrolled.

Unit details and rules

Academic unit Urban and Regional Planning and Policy
Credit points 12
Prerequisites
? 
48 credit points of units
Corequisites
? 
None
Prohibitions
? 
ARCH9031 or ARCH9060 or ARCH9045 or ARCH9046 or PLAN9010 or PLAN9011
Assumed knowledge
? 

None

Available to study abroad and exchange students

No

Teaching staff

Coordinator Ryan Jones, ryan.m.jones@sydney.edu.au
Type Description Weight Due Length
Assignment hurdle task Planning Report
Report
70% STUVAC 12000 words + tables, maps, figures etc.
Outcomes assessed: LO1 LO2 LO3 LO4
Presentation hurdle task Research Proposal
Presentation
15% Week 03 See Canvas for details.
Outcomes assessed: LO1 LO4 LO3 LO2
Presentation hurdle task Progress Seminar
Presentation
15% Week 12 See Canvas for details.
Outcomes assessed: LO1 LO4 LO3 LO2
hurdle task = hurdle task ?

Assessment summary

  • Research Proposal: The first presentation provides an opportunity for students to outline their research proposal based on the format and guidelines given in class so as to obtain feedback prior to formally commencing your work in detail. A copy of the PowerPoint must be submitted on Canvas prior to the in-class presentations (which will be from all students - oral and written feedback will be provided). 
  • Progress Seminar: The second presentation asks students to reflect on their research process and identify some preliminary results or findings ahead of the Final Report. Students will describe their project in summary form – Context, Research Problem, Methodology, Results & Discussion, Conclusion – and obtain feedback on their progress. A copy of the PowerPoint must be submitted on Canvas prior to the in-class presentations (which will be from all students - oral and written feedback will be provided). 
  • Planning Report/Dissertation: The Planning Report is to be no more than 12,000 words (including References) and for the Dissertation, no more than 25,000 words (including References).Written feedback against the marking criteria wil be provided. 

Detailed information for each assessment, including format and what is expected, will be found on Canvas and discussed in class.

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2014 (Schedule 1).

As a general guide, a High distinction indicates work of an exceptional standard, a Distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name

Mark range

Description

High distinction

85 - 100

Work of outstanding quality, demonstrating mastery of the learning outcomes
assessed. The work shows significant innovation, experimentation, critical
analysis, synthesis, insight, creativity, and/or exceptional skill.

Distinction

75 - 84

Work of excellent quality, demonstrating a sound grasp of the learning
outcomes assessed. The work shows innovation, experimentation, critical
analysis, synthesis, insight, creativity, and/or superior skill.

Credit

65 - 74

Work of good quality, demonstrating more than satisfactory achievement of the
learning outcomes assessed, or work of excellent quality for a majority of the
learning outcomes assessed.

Pass

50 - 64

Work demonstrating satisfactory achievement of the learning outcomes
assessed.

Fail

0 - 49

Work that does not demonstrate satisfactory achievement of one or more of the
learning outcomes assessed.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

  • Deduction of 5% of the maximum mark for each calendar day after the due date.
  • After ten calendar days late, a mark of zero will be awarded.

This unit has an exception to the standard University policy or supplementary information has been provided by the unit coordinator. This information is displayed below:

As per ADP Policies.

Academic integrity

The Current Student website provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

Use of generative artificial intelligence (AI) and automated writing tools

You may only use generative AI and automated writing tools in assessment tasks if you are permitted to by your unit coordinator. If you do use these tools, you must acknowledge this in your work, either in a footnote or an acknowledgement section. The assessment instructions or unit outline will give guidance of the types of tools that are permitted and how the tools should be used.

Your final submitted work must be your own, original work. You must acknowledge any use of generative AI tools that have been used in the assessment, and any material that forms part of your submission must be appropriately referenced. For guidance on how to acknowledge the use of AI, please refer to the AI in Education Canvas site.

The unapproved use of these tools or unacknowledged use will be considered a breach of the Academic Integrity Policy and penalties may apply.

Studiosity is permitted unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission as detailed on the Learning Hub’s Canvas page.

Outside assessment tasks, generative AI tools may be used to support your learning. The AI in Education Canvas site contains a number of productive ways that students are using AI to improve their learning.

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

WK Topic Learning activity Learning outcomes
Multiple weeks Weekly/fortnightly meetings with supervisor to discuss research progress. Tutorial (12 hr) LO1 LO2 LO3 LO4
Week 01 Introduction to unit, unit outline, format, structure, expectations and assessments Lecture (1 hr) LO1 LO2 LO3 LO4
Research topic selection, Supervisor selection Tutorial (2 hr) LO1 LO2 LO3 LO4
Week 03 Pre-presentation review; In-class presentations: Draft research proposal Lecture and tutorial (3 hr) LO1 LO2 LO4
Week 12 Final submission overview; In-class presentations: Draft final planning report Lecture and tutorial (3 hr) LO1 LO2 LO3 LO4

Attendance and class requirements

  • Referencing: Harvard or APA. 
  • Remote Learning. Unless indicated otherise, all lectures, tutorials and student presentations will be on-line. The Zoom link for each class will be advised to students at least 1 day before the scheduled lecture/tutorial/presentation via Canvas Notices. 

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 12 credit point unit, this equates to roughly 240-300 hours of student effort in total.

Required readings

See Canvas for additional sources.

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

  • LO1. think critically about a planning or policy problem/theme, and develop and apply an appropriate research methodology or analytical approach to address and explore it
  • LO2. identify, access and analyse appropriate sources of information, research and literature relevant to urban and regional planning and policy issues
  • LO3. undertake secondary (and possibly primary) research relevant to urban planning policy or practice
  • LO4. communicate research findings verbally and in writing to a high standard in a way that demonstrates academic and professional competence reflective of this Capstone Unit.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1 Depth of disciplinary expertise

Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.

GQ2 Critical thinking and problem solving

Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.

GQ3 Oral and written communication

Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.

GQ4 Information and digital literacy

Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.

GQ5 Inventiveness

Generating novel ideas and solutions.

GQ6 Cultural competence

Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.

GQ7 Interdisciplinary effectiveness

Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.

GQ8 Integrated professional, ethical, and personal identity

An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.

GQ9 Influence

Engaging others in a process, idea or vision.

Outcome map

Learning outcomes Graduate qualities
GQ1 GQ2 GQ3 GQ4 GQ5 GQ6 GQ7 GQ8 GQ9

This section outlines changes made to this unit following staff and student reviews.

Student feedback has been taken into consideration since this unit was last offered.

All information for this unit will be on the designated Canvas site. 

Additional costs

Some small costs may be incurred by the student in the production of the report/research proposal (such as for graphics,images, maps, etc).

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.