Skip to main content
Unit of study_

SDDM5112: Foundations of Clinical Dentistry A1

Semester 1, 2021 [Normal day] - Westmead, Sydney

This unit introduces the concepts associated with Professional Practice, Clinical Management and Population Oral Health. It also addresses the morphology, development, eruption and exfoliation of teeth to provide a framework for understanding the structure of primary and permanent teeth. The student will also be introduced to the discipline of Cariology and the prevention and management of the disease of dental caries. Students will be introduced to ethics and law. The treatment and restoration of advanced carious lesions will be introduced in Tooth Conservation and Endodontics, where the early development of technical skills in the simulation clinic will be supported by didactic teaching sessions. Students may be required to attend classes at multiple locations.

Unit details and rules

Unit code SDDM5112
Academic unit Discipline of Restorative and Reconstructive Dentistry
Credit points 6
Prohibitions
? 
None
Prerequisites
? 
None
Corequisites
? 
SDDM5111 and SDDM5113 and SDDM5114
Assumed knowledge
? 

None

Available to study abroad and exchange students

No

Teaching staff

Coordinator Maria Tran, maria.tran@sydney.edu.au
Lecturer(s) Alexander Holden, alexander.holden@sydney.edu.au
Jinlong Gao, jinlong.gao@sydney.edu.au
Phillip Burke, phillip.burke@sydney.edu.au
Woosung Sohn, woosung.sohn@sydney.edu.au
Maria Tran, maria.tran@sydney.edu.au
Type Description Weight Due Length
Presentation group assignment Population oral health presentation (For SDDM5122)
Group presentation
0% - n/a
Outcomes assessed: LO5
Online task hurdle task Academic honesty education module (For SDDM5112)
Competency assessment
0% - 30 minutes
Outcomes assessed: LO4
Participation Interprofessional learning workshop (For SDDM5112)
Participation and reflective task
0% - 6-7 hours
Outcomes assessed: LO4
Skills-based evaluation hurdle task Pre-clinical tooth conservation practical assessment - end of Semester 1 (For SDDM5112)
Clinical skills assessment
100% - 3 hrs
Outcomes assessed: LO2
Small continuous assessment Continuous sessional assessments
Clinical skills and competency assessment
0% Ongoing n/a
Outcomes assessed: LO1 LO7 LO6 LO5 LO4 LO3 LO2
hurdle task = hurdle task ?
group assignment = group assignment ?

Assessment summary

  • Professional practice case vingnettes: Students will be given an online case vignette comprised of an ethical and/or professional dilemma. Students will be required to answer questions relating to the case and suggest how they would manage the issue presented.
  • Interprofessional learning workshop: This workshop is conducted in semester 1 with postgraduate students in the disciplines of nursing, pharmacy and medicine. The workshop is a blended learning activity consisting of 2 hours of prework (delivered face-to-face and online) followed by a three-hour interdisciplinary workshop and a 1-2 hour assessment task in the form of a written reflective essay.
  • Pre-clinical tooth conservation practical: This pre-clinical assessment held at the end of semester requires students to complete a set of specific tasks on clinically relevant simulation models.

Detailed information for each assessment can be found on Canvas.

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2014 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name

Mark range

Description

High distinction

85 - 100

 

Distinction

75 - 84

 

Credit

65 - 74

 

Pass

50 - 64

 

Fail

0 - 49

When you don’t meet the learning outcomes of the unit to a satisfactory standard.

For more information see sydney.edu.au/students/guide-to-grades.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

  • Deduction of 5% of the maximum mark for each calendar day after the due date.
  • After ten calendar days late, a mark of zero will be awarded.

Academic integrity

The Current Student website  provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.  

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

You may only use artificial intelligence and writing assistance tools in assessment tasks if you are permitted to by your unit coordinator, and if you do use them, you must also acknowledge this in your work, either in a footnote or an acknowledgement section.

Studiosity is permitted for postgraduate units unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission.

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

WK Topic Learning activity Learning outcomes
- Introduction to tooth morphology Lecture (1 hr) LO1
Root morphology Lecture (1 hr) LO1
Session 1: permanent incisors, canines and premolars Practical (3 hr) LO1
Session 2: permanent molars and deciduous teeth Practical (3 hr) LO1
Session 3: OPGs, tooth development and dental age Practical (3 hr) LO1
Session 4: root morphology practical session Practical (3 hr) LO1
Introduction: Posture and instruments; SIMODONT Seminar (1 hr) LO2
Cavity design 1 (Introduction and Class V) Seminar (1 hr) LO2
Cavity design 2 (Class I and Class II) Seminar (1 hr) LO2
Cavity design 3 (Class III and Class IV) Seminar (1 hr) LO2
Introduction to simulation clinic (SIM clinic) Practical (3 hr) LO2
Dentaprac; Posture check Practical (3 hr) LO2
Dentaprac; SIMODONT induction Practical (3 hr) LO2
Rubber dam placement Practical (3 hr) LO2
Class V GI cavity prep Practical (3 hr) LO2
Class V composite resin cavity prep Practical (3 hr) LO2
Class I composite resin cavity prep Practical (3 hr) LO2
Class I composite resin cavity prep (Indirect vision) Practical (3 hr) LO2
Class II composite resin cavity prep Practical (3 hr) LO2
Class II Composite resin cavity prep (Indirect vision) Practical (3 hr) LO2
Class II amalgam cavity prep Practical (3 hr) LO2
Class III composite resin cavity prep Practical (3 hr) LO2
Class II MOD amalgam cavity prep Practical (3 hr) LO2
Practice for SCCA Practical (3 hr) LO2
Summative pre-clinical tooth conservation practical assessment (SCCA) Practical (3 hr) LO2
Introduction of endodontic terminology and endodontic instruments Lecture (1 hr) LO3
Introduction of endodontic techniques Lecture (1 hr) LO3
Considering your professional future as a student dentist in training Lecture (1 hr) LO4 LO5
The national law: a guided tour Lecture (1 hr) LO4
History of Indigenous and colonial Australia Lecture (1 hr) LO4
Foundations of bioethics Lecture (1 hr) LO4
The importance of effective communication Lecture (1 hr) LO4
Ethics and professionalism case studies 1 Workshop (1.5 hr) LO4
1. Introduction to health promotion and health behaviour change 1; 2. Motivational interviewing 1 (joint workshop with population oral health) Workshop (1.5 hr) LO4 LO5
Introduction to health promotion and health behaviour change 2; 2. Motivational interviewing 2 (joint workshop with population oral health) Workshop (1.5 hr) LO4 LO5
Why do we need population oral health? Lecture (1 hr) LO5
Indigenous challenges Lecture (1 hr) LO5
1. Introduction to health promotion and health behaviour change; 2. Motivational interviewing 1 (joint workshop with professional practice) Workshop (1.5 hr) LO5
Expectations and professional behaviour in a clinical setting Lecture (1 hr) LO6
Back care 1 Lecture (1 hr) LO6
Back care 2 Lecture (1 hr) LO6
Clinical infection control Lecture (1 hr) LO6
Hand hygiene Lecture (0.5 hr) LO6
Applying anatomy to clinical examination Lecture (1 hr) LO7
1. Introduction to clinical record and record keeping procedures; 2. Introduction to infection control; 3. Practice setting up and clearing simple dental exam procedure Clinical practice (3 hr) LO6
Extra oral and intra oral examination Clinical practice (3 hr) LO7

Attendance and class requirements

  • Attendance: Attendance is a professional responsibility required of all students admitted to academic programs within the Sydney Dental School. All programs in the Sydney Dental School have a 90% attendance policy, for all compulsory components of Units of Study, as detailed in the Faculty of Dentistry Attendance Provisions 2015. This includes all clinical and practical sessions. The course requirements cannot be satisfied if more than 10% of any section of a course is missed for any reason.

  • Professionalism: Students in all Sydney Dental School programs are subject to the Faculty of Medicine and Health Professionalism Requirements 2019 and the Faculty of Medicine and Health Professionalism Provisions 2019. Professionalism is an essential component of developing competency to practice. It is important for students to demonstrate professional behaviour in all contexts and environments. In accordance with these local provisions: candidates who demonstrate serious or repeated unprofessional behaviour may be required to show cause as to why their enrolment should be continued. Failure to show cause may result in exclusion from the course.

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Required readings

Lecture Title: Considering your professional future as a student dentist in training (PP) – Dr A.Holden 

 

Objectives: 

  • Students will be encouraged to conceptualise beyond the narrow occupational destination of a career as a dentist in favour of developing a sense of purpose about their studies that is aligned with their personal values and aspirations.
  • Students will practice skills in self-reflection, considering prior learning and their future aspirations, developing their appreciation of how they might engage with curricular and co-curricular opportunities whilst studying. 
  • Students will engage in discussions with peers and the session facilitator examining how they might deal with challenges positively, how they might seek support and develop strategies for managing stressful periods during their studies. 

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

  • LO1. identify and describe tooth tissues, types and functions of primary and permament teeth
  • LO2. develop competent decision making and technical skills in cavity design and restoration placement using direct restorative materials in simple cavities
  • LO3. identify endodontic terminology and instruments, and develop practical skills in basic endodontic techniques
  • LO4. develop a basic understanding of the scope of dental practice beyond the application of technical skills; dental scholarship and evidence-based dentistry, including effective communication, clinical ethics and moral reasoning with self-reflection to provide patient-focused care
  • LO5. develop an awareness of population oral health and challenges faced by different communities
  • LO6. describe the basics of clinical infection control and demonstrate its application in a clinical setting
  • LO7. describe and identify intra oral and extra oral anatomical landmarks as part of a clinical examination procedure

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1 Depth of disciplinary expertise

Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.

GQ2 Critical thinking and problem solving

Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.

GQ3 Oral and written communication

Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.

GQ4 Information and digital literacy

Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.

GQ5 Inventiveness

Generating novel ideas and solutions.

GQ6 Cultural competence

Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.

GQ7 Interdisciplinary effectiveness

Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.

GQ8 Integrated professional, ethical, and personal identity

An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.

GQ9 Influence

Engaging others in a process, idea or vision.

Outcome map

Learning outcomes Graduate qualities
GQ1 GQ2 GQ3 GQ4 GQ5 GQ6 GQ7 GQ8 GQ9

This section outlines changes made to this unit following staff and student reviews.

No changes have been made since this unit was last offered

Work, health and safety

Students must comply with work health and safety, infection control and dress standard policies of all laboratories, placement sites and Local Health Districts (LHDs).

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.