Skip to main content
Unit of study_

SDDM5222: Foundations of Clinical Dentistry A4

Semester 2, 2021 [Normal day] - Westmead, Sydney

This unit of study continues from semester one and introduces students to integrated clinical practice. Refer to semester one description. Students may be required to attend classes at multiple locations.

Unit details and rules

Unit code SDDM5222
Academic unit Discipline of Restorative and Reconstructive Dentistry
Credit points 7
Prohibitions
? 
None
Prerequisites
? 
SDDM5111 and SDDM5112 and SDDM5113 and SDDM5114 and SDDM5121 and SDDM5122 and SDDM5123 and SDDM5124
Corequisites
? 
SDDM5221 and SDDM5223 and SDDM5224
Assumed knowledge
? 

None

Available to study abroad and exchange students

No

Teaching staff

Coordinator Maria Tran, maria.tran@sydney.edu.au
Lecturer(s) Woosung Sohn, woosung.sohn@sydney.edu.au
Christine Wallace, christine.wallace@sydney.edu.au
Rahena Akhter, rahena.akhter@sydney.edu.au
Sarah McKay, s.mckay@usyd.edu.au
Type Description Weight Due Length
Skills-based evaluation Pre-clinical tooth conservation practical assessment - end of semester 2 (For SDDM5222)
Clinical skills assessment
14% - 3 hrs
Outcomes assessed: LO1
Skills-based evaluation Pre-clinical tooth conservation competency assessment - end of semester 2 (For SDDM5222)
Competency assessment
14% - 3 hrs
Outcomes assessed: LO1
Skills-based evaluation hurdle task Pre-clinical endodontic practical assessment #2 (For SDDM5222)
Clinical skills assessment
17% - 3 hrs
Outcomes assessed: LO2
Final exam (Record+) Type B final exam Theory examination (For SDDM5222)
Written examination with non-written elements
55% Formal exam period 2 hours
Outcomes assessed: LO1 LO2 LO3 LO4 LO5 LO6 LO7
Small continuous assessment hurdle task Continuous pre-clinical assessment
Clinical skills and competency assessment
0% Ongoing n/a
Outcomes assessed: LO1
Skills-based evaluation hurdle task group assignment Health collaboration challenge (HCC)
Competency assessment
0% Week 02 5 minutes, 1 page
Outcomes assessed: LO1 LO2 LO3 LO4 LO6 LO7
hurdle task = hurdle task ?
group assignment = group assignment ?
Type B final exam = Type B final exam ?

Assessment summary

  • Theory examination: The exam will include single best answer and short answer questions. 
  • Pre-clinical endodontic practical assessment: The assessment requires students to complete a set of specific tasks on clinically relevant simulation models.
  • Continuous pre-clinical assessment: The continuous clinical assessment occurs during each pre-clinical session. These assessments aim to determine student development of competency throughout the unit of study.
  • Clinical work: Students are required to complete a range of different treatments for a number of patients which is documented in the clinical workbook.
  • Health collaboration challenge (HCC): The HCC is a large-scale interprofessional learning (IPL) activity. In 2020 there will be approximately 1800 students working in teams of up to 6 members from dentistry, medicine, nursing, pharmacy, physiotherapy, occupational therapy, speech pathology, diagnostic radiology and exercise physiology. Each team is tasked with developing a management plan for a complex patient/client case.

Detailed information for each assessment can be found on Canvas.

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2014 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name

Mark range

Description

High distinction

85 - 100

 

Distinction

75 - 84

 

Credit

65 - 74

 

Pass

50 - 64

 

Fail

0 - 49

When you don’t meet the learning outcomes of the unit to a satisfactory standard.

For more information see sydney.edu.au/students/guide-to-grades.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

  • Deduction of 5% of the maximum mark for each calendar day after the due date.
  • After ten calendar days late, a mark of zero will be awarded.

Academic integrity

The Current Student website  provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.  

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

You may only use artificial intelligence and writing assistance tools in assessment tasks if you are permitted to by your unit coordinator, and if you do use them, you must also acknowledge this in your work, either in a footnote or an acknowledgement section.

Studiosity is permitted for postgraduate units unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission.

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

WK Topic Learning activity Learning outcomes
- Calcium hydroxide Lecture (1 hr) LO2
Intro to rotary endodontics Lecture (1 hr) LO2
Apex locators Lecture (1 hr) LO2
Rubber dam and banding Lecture (1 hr) LO2
Endo-perio lesion Lecture (1 hr) LO2
Non-vital bleaching Lecture (1 hr) LO2
Root resorption Lecture (1 hr) LO2
Pain management of inter-appointment and post-filling discomfort Lecture (1 hr) LO2
Endo problem solving Lecture (1 hr) LO2
Introduction to endo IT Molar & Mtwo Intro Endo trainer - rotary NiTi instrumentation. Simulation laboratory (3 hr) LO2
Mand Molar access Simulation laboratory (3 hr) LO2
Mand molar and rotary NiTi instrumentation 1 Simulation laboratory (3 hr) LO2
Mand molar and rotary NiTi instrumentation 2 Simulation laboratory (3 hr) LO2
Mand molar-banding, access and IWL Simulation laboratory (3 hr) LO2
Mand molar-instrumentation Simulation laboratory (3 hr) LO2
Mand molar-finalise instrumentation Simulation laboratory (3 hr) LO2
Mand molar-obturation Simulation laboratory (3 hr) LO2
Formative endodontic preclinical assessment and feedback Simulation laboratory (3 hr) LO2
Endo feedback and catch-up session Simulation laboratory (3 hr) LO2
Endodontic preclinical assessment Simulation laboratory (3 hr) LO2
Smoking cessation: development of communication for healthy behaviours (communication practical skills session) Workshop (1.5 hr) LO3 LO4
Having appropriate discussions with patients (communication practical skills session) Workshop (1.5 hr) LO3 LO4
Oral heatlh promotion approaches Workshop (1.5 hr) LO3 LO4
Diet and nutrition 1 Workshop (1 hr) LO5
Diet and nutrition 2 Workshop (1 hr) LO5
Treatment planning of patients presenting in pain Lecture (1.25 hr) LO6 LO7
Treatment planning session 1 Clinical practice (3 hr) LO6 LO7
Treatment planning session 2 Clinical practice (3 hr) LO6 LO7
Treatment planning session 3 Clinical practice (3 hr) LO6 LO7
Treatment plan CBL 1 Workshop (3 hr) LO6 LO7
Treatment planning CBL 2 Workshop (3 hr) LO6 LO7
Introduction to Integrated Clinic Q&A Seminar (2 hr) LO6 LO7
Please select a valid week from the list below Seminar 1: Dental Adhesives Seminar (1 hr) LO1
Seminar 3: Composite Resins Seminar (1 hr) LO1
Seminar 2: Light Curing (devices and self-protection) Seminar (1 hr) LO1
Seminar 4: Bulk-fill Composites Seminar (1 hr) LO1
Seminar 5 & 6: Lining, temporary materials and therapeutic agents/Pulpal protection Seminar (1 hr) LO1
Seminar 7: Complex Restorations - Amalgam Seminar (1 hr) LO1
Seminar 8: Complex Restorations - Composite resin Seminar (1 hr) LO1
Seminar 9: Simple restoration of endodontic treated anterior tooth Seminar (1 hr) LO1
Seminar 10: Simple Composite Resin Veneer Seminar (1 hr) LO1
SIM 1: Class V (prepared in DMD1) CR restorations Simulation laboratory (3 hr) LO1
SIM 2: Class I CR restorations Simulation laboratory (3 hr) LO1
SIM 3: Class III CR restorations Simulation laboratory (3 hr) LO1
SIM 4: Class II CR restorations Simulation laboratory (3 hr) LO1
SIM 5: Class II Bulk-fill CR restorations Simulation laboratory (3 hr) LO1
SIM 6: Class IV CR restoration 21 Simulation laboratory (3 hr) LO1
SIM 7: Class II lining, CR restorations Simulation laboratory (3 hr) LO1
SIM 8: Natural teeth: pulpal protection, lining & restoration Simulation laboratory (3 hr) LO1
SIM 9: Complex restoration preparations Simulation laboratory (3 hr) LO1
SIM 10: Complex Restorations - AR Simulation laboratory (3 hr) LO1
SIM 11: Complex restorations - CR Simulation laboratory (3 hr) LO1
SIM 12: Simple Restoration of endodontic treated anterior tooth (GI+CR) Simulation laboratory (3 hr) LO1
SIM 13: Simple Direct Composite Resin veneer preparation & restoration Simulation laboratory (3 hr) LO1
SIM 14: Prepare for Competency and Practical Assessments Simulation laboratory (3 hr) LO1
SIM 15: Restoration Competency assessments Simulation laboratory (3 hr) LO1
SIM 16: Practical Assessment (SCCA) Simulation laboratory (3 hr) LO1
Unsupervised SIM- practice cavity preparations Simulation laboratory (3 hr) LO1
Unsupervised SIM- practice cavity preparations Simulation laboratory (3 hr) LO1
Week 01 Compulsory: BLS Training Workshop (8 hr) LO6 LO7
Week 05 COMPULSORY FMH Health Collaboration Challenge (HCC) Workshop (8 hr) LO3 LO4 LO5 LO7

Attendance and class requirements

  • Attendance: Attendance is a professional responsibility required of all students admitted to academic programs within the Sydney Dental School. All programs in the Sydney Dental School have a 90% attendance policy, for all compulsory components of Units of Study, as detailed in the Faculty of Dentistry Attendance Provisions 2015. This includes all clinical and practical sessions. The course requirements cannot be satisfied if more than 10% of any section of a course is missed for any reason.

  • Professionalism: Students in all Sydney Dental School programs are subject to the Faculty of Medicine and Health Professionalism Requirements 2019 and the Faculty of Medicine and Health Professionalism Provisions 2019. Professionalism is an essential component of developing competency to practice. It is important for students to demonstrate professional behaviour in all contexts and environments. In accordance with these local provisions: candidates who demonstrate serious or repeated unprofessional behaviour may be required to show cause as to why their enrolment should be continued. Failure to show cause may result in exclusion from the course.

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 7 credit point unit, this equates to roughly 140-175 hours of student effort in total.

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

  • LO1. apply and translate the disciplinary knowledge and practical skills of preclinical tooth conservation in patient care
  • LO2. demonstrate disciplinary knowledge in endodontics and technical skills in more complex endodontic procedures (3 canals)
  • LO3. develop and demonstrate communication skills to encourage healthy behaviours in patients
  • LO4. discuss oral health promotion
  • LO5. discuss the importance of diet and nutrition in oral health, including how to apply this in a dietary consult
  • LO6. demonstrate competence in assessment, examination, diagnosis and treatment planning of patients
  • LO7. develop disciplinary knowledge and clinical skills for the provision of patient-centered care as part of the dental team, with the understanding of the need to be flexible and adaptable, and work collaboratively with other oral health practitioners.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1 Depth of disciplinary expertise

Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.

GQ2 Critical thinking and problem solving

Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.

GQ3 Oral and written communication

Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.

GQ4 Information and digital literacy

Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.

GQ5 Inventiveness

Generating novel ideas and solutions.

GQ6 Cultural competence

Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.

GQ7 Interdisciplinary effectiveness

Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.

GQ8 Integrated professional, ethical, and personal identity

An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.

GQ9 Influence

Engaging others in a process, idea or vision.

Outcome map

Learning outcomes Graduate qualities
GQ1 GQ2 GQ3 GQ4 GQ5 GQ6 GQ7 GQ8 GQ9

This section outlines changes made to this unit following staff and student reviews.

No changes have been made since this unit was last offered

Work, health and safety

Students must comply with work health and safety, infection control and dress standard policies of all laboratories, placement sites and Local Health Districts (LHDs).

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.