University of Sydney Handbooks - 2017 Archive

Download full 2017 archive Page archived at: Mon, 28 Aug 2017 11:21:57 +1000

Unit of study table

Unit of study Credit points A: Assumed knowledge P: Prerequisites C: Corequisites N: Prohibition Session

Master of Professional Engineering (Aerospace)

To qualify for the award of the Master of Professional Engineering in this specialisation, a candidate must complete 144 credit points, including core and elective units of study as listed below.
Candidates with a Bachelor of Engineering or equivalent in the relevant discipline, and who have reached an acceptable level of academic achievement in their prior degree, may be eligible for a reduction of volume in learning of up to 48 credit points.

Core units

Year One

Year One covers Foundation units only. Candidates with a prior Bachelor of Engineering degree or equivalent in the field related to this specialisation may be exempted from Foundation units.
AMME9261
Fluid Mechanics 1
6    A Students are expected to be familiar with first year basic maths: integral calculus, differential calculus and linear algebra.
N AMME5200
Semester 1
AMME9500
Engineering Dynamics
6    A University level Maths and Physics, especially covering the area of Mechanics.
N AMME5500
Semester 1
AMME9700
Instrumentation
6    A Programming Skills, 1st Year maths skills, familiarity with fundamental Aerospace concepts.
N AMME5700
Semester 1
ENGG9801
Engineering Computing
6    N ENGG5801 OR ENGG1801
Semester 1
AMME9262
Thermal Engineering 1
6    A Students are expected to be familiar with basic, first year, integral calculus, differential calculus and linear algebra.
N AMME5200
Semester 2
AMME9301
Mechanics of Solids 1
6    A Physics, statics, Differential Calculus, Linear Algebra, Integral Calculus and Modelling.
N AMME5301
Semester 2
AMME9302
Materials 1
6    N AMME5302 OR CIVL5501
Semester 2
MECH9400
Mechanical Design 1
6    A Knowledge of programming in MATLAB and a knowledge of Engineering Mechanics (statics)
N MECH5400
Semester 2

Year Two

AERO9261
Propulsion
6    A Mathematics and Physics to a level of Bachelor of Science or equivalent. Good knowledge of fluid dynamics and thermodynamics.
P (AMME9261 and AMME9262) or AMME5200
N AERO5211
Semester 1
AERO9360
Aerospace Structures 1
6    P AMME9301 or AMME5301
N AERO5310
Semester 1
AERO9460
Aerospace Design 1
6    A Mathematics, Physics and Solid Mechanics at the level of Bachelor of Engineering, Science or equivalent
P AMME9301 and MECH9400
N AERO5410
Semester 1
AMME9501
System Dynamics and Control
6    A AMME5500 OR AMME9500
N AMME5501
Semester 1
AERO9260
Aerodynamics 1
6    A Mathematics and Physics to the level of Bachelor of Science or equivalent. Linear Mathematics and Vector Calculus, Partial Differential Equations (Intro).
P AMME9261 or AMME5200
N AERO5210
Semester 2
AERO9560
Flight Mechanics 1
6    A Mathematics, Physics and Dynamics assumed knowledge at the level of Bachelor of Science or equivalent.
P AMME9500 or AMME5500
N AERO5510
Semester 2
Select 12 credit points from Aerospace recommended electives block.

Year Three

AERO9301
Applied Finite Element Analysis
6    A BE in area of Aerospace Engineering or related Engineering field.
P AERO9360 or AERO5310 or MECH9361 or MECH5361
N AERO5301 OR AERO4360
Semester 1
AMME9601
Professional Engineering
6    A It is recommended that you have undertaken ENGG5217 Practical Experience in a period prior to undertaking this course, or be able to demonstrate equivalent understanding of professional practice as some assessment tasks will draw upon your experiences in professional engineering practice.
N AMME5601
Semester 1
ENGG5217
Practical Experience
  

Students should have completed one year of their MPE program before enrolling in this unit.
Intensive February
Intensive July
Semester 1
Semester 2
AERO5400
Advanced Aircraft Design Analysis
6    A (AERO1400, AERO3260, AERO3261, AERO3360, AERO3465, AERO3560 and AERO4460) or equivalent.
P AERO3460 or AERO5410 or AERO9460
N AERO4491
Semester 2
ENGG5103
Safety Systems and Risk Analysis
6      Semester 2
Select at least 12 credit points from the Project or Research Pathway block.
Select up to 12 credit points from Aerospace recommended electives block.

Elective units

Candidates must complete 24 credit points from the following Aerospace elective units.
AERO5200
Advanced Aerodynamics
6    A BE in the area of Aerospace Engineering or related Engineering field.
P AERO5210 or AERO9260 or AERO3260
Semester 2
AERO5500
Flight Mechanics Test and Evaluation Adv
6    A BE in area of Aerospace Engineering or related Engineering Field.
P AERO5510 OR AERO9560 OR AERO3560

Note: Department permission required for enrolment

Semester 1
Semester 2
AERO5700
Space Engineering (Advanced)
6    A AERO3760

Note: Department permission required for enrolment

Semester 2
AERO5750
Unmanned Air Vehicle Systems
6    A AERO1560, AERO1400, AMME2700, AERO3460, AERO3560, AERO3260, AERO3261 and AERO4460.

Note: Department permission required for enrolment

Semester 2
AERO9760
Spacecraft and Satellite Design
6    N AERO5760
Semester 2
AMME5202
Advanced Computational Fluid Dynamics
6    A Partial differential equations; Finite difference methods;Taylor series; Basic fluid mechanics including pressure, velocity, boundary layers, separated and recirculating flows. Basic computer programming skills.
Semester 1
AMME5510
Vibration and Acoustics
6    P (AMME2301 OR AMME9301) AND (AMME2200 OR AMME2261 OR AMME9261) AND (AMME2500 OR AMME9500)
Semester 2
AMME5520
Advanced Control and Optimisation
6    A Students have an interest and a strong understanding of feedback control systems, specifically in the area of system modelling and control design in the frequency domain.
P AMME3500 OR AMME5501 OR AMME9501
Semester 1
ENGG5011
Engineering Foundation Studies A
6   
Note: Department permission required for enrolment

Semester 1
Semester 2
ENGG5202
Sustainable Design, Eng and Mgt
6    A General knowledge in science and calculus and understanding of basic principles of chemistry, physics and mechanics
Semester 1
MECH5275
Renewable Energy
6    A The students will require an understanding of the basic principles of fluid mechanics, thermodynamics and heat transfer, and the application of these principles to energy conversion systems. In particular, students should be able to analyse fluid flow in turbomachinery; perform first and second law thermodynamic analysis of energy conversion systems; and perform calculations of radiative, conductive and convective heat transfer.
P (MECH3260 AND MECH3261) OR (AERO3260 AND AERO3261) OR (MECH5262 AND MECH5261) OR (MECH9260 AND MECH9261) OR (AERO9260 AND AERO9261). Students claiming to have prerequisite knowledge based on study at other institutions must contact the unit of study coordinator before enrolling in this unit and may be required to sit a pre-exam to demonstrate that they have the necessary knowledge and skills to undertake this advanced level unit.

Note: Department permission required for enrolment

Semester 2
MECH5305
Smart Materials
6    A Fundamental knowledge in materials science and engineering: 1) atomic and crystal structures 2) metallurgy 3) structure-property relationship 4) mechanics of engineering materials 5) solid mechanics
P (AMME9301 OR AMME5301 OR AMME2301) AND (AMME9302 OR AMME5302 OR AMME2302 OR AMME1362)
Semester 2
MECH5310
Advanced Engineering Materials
6    P (AMME2301 OR AMME9301) AND (AMME2302 OR AMME1362 OR AMME9302) AND (MECH3362 OR MECH9362)
N MECH4310
Semester 1

Project units

All candidates are required to complete a minimum of 12 credit points of Project or Research units during the final year of study.
Candidates achieving an average mark of 70% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Extended Capstone Project.
Extended Capstone Project candidates take Capstone Project units AMME5020 and AMME5022 (total 18 cp) in place of Capstone Project AMME5021 and 6 cp of elective units.
AMME5020
Capstone Project A
6    P 96 cp from MPE degree program or 24 cp from the ME program (including any credit for previous study).
Semester 1
Semester 2
AMME5021
Capstone Project B
6    P 96 credit points from the MPE degree program (incuding any credit for prior study) or 24 credit points from the ME degree program (incuding any credit for prior study).
Semester 1
Semester 2
AMME5022
Capstone Project B Extended
12    P 42 credit points in the Master of Engineering and WAM >70, or 66 credit points in the Master of Professional Engineering and WAM >70 or exemption.

Note: Department permission required for enrolment

Semester 1
Semester 2

Research pathway

Candidates achieving an average mark of 75% or higher over 48 credit points of units of study in the Year Two Table or equivalent are eligible for the Research Pathway.
Research pathway candidates take Dissertation units AMME5222 and AMME5223 (total 24 cp) in place of Capstone Project units and 12 cp of elective units.
AMME5222
Dissertation A
12    N AMME5020 OR AMME5021 OR AMME5022

Note: Department permission required for enrolment
In order to enrol in a dissertation project, students must first secure an academic supervisor in an area that they are interested. Students must have acieved a WAM of 75% or greater in their prior year of study. The topic of your project must be determined in discussion with the supervisor.
Semester 1
Semester 2
AMME5223
Dissertation B
12    N AMME5020 OR AMME5021 OR AMME5022

Note: Department permission required for enrolment
In order to enrol in a dissertation project, students must first secure an academic supervisor in an area that they are interested. Students must have acieved a WAM of 75% or greater in their prior year of study. The topic of your project must be determined in discussion with the supervisor.
Semester 1
Semester 2

Exchange units

Exchange units require the approval of the Program Director. With approval, up to 12 credit points of Exchange units may taken in place of other units, towards the requirements of the degree.
ENGG5231
Engineering Graduate Exchange A
6      Intensive January
Intensive July
ENGG5232
Engineering Graduate Exchange B
6      Intensive January
Intensive July

For more information on degree program requirements visit CUSP (https://cusp.sydney.edu.au).