University of Sydney Handbooks - 2019 Archive

Download full 2019 archive Page archived at: Tue, 05 Nov 2019 02:36:07 +0000

Honours in the Bachelor of Design Computing

Admission

Students planning to enrol in the honours program are encouraged to complete a preparatory unit of study as an elective, such as an Independent Study unit, in their third year.

To qualify to enrol in the honours program a student should have qualified for the award of the Bachelor of Design Computing pass degree or a similar qualification in a related field at an acceptable standard, or be a graduate of not more than four years standing. Students should have a weighted average mark (WAM) of at least 70 for the pass degree.

Before applying you should have an approved honours project topic and supervisor. The supervisor must be from the academic staff. We invite you to discuss your plans with a relevant staff member. Students who complete a preparatory unit of study as elective will probably resolve their topic and supervisor during this unit. You can have an associate supervisor if you require shared supervision beyond the immediate expertise of your supervisor.

The Honours year

The honours course is to be taken full time over two consecutive semesters. Enrolment is effected by taking 48 credit points, being DECO4001 and DECO4002 in the first semester and DECO4003 and DECO4004 in the second semester.

There will be no formal classes. You are expected to make arrangements for regular (weekly) contact with your supervisor on an individual basis to chart the work, receive advice, and review and monitor progress. At the conclusion of the year you are expected to submit a body of work, usually a dissertation, properly bound for addition to the school's honours and master's dissertation collection.

Submission date and form of dissertation

All honours dissertations are to be lodged with the supervisor by the end of the first week of the formal examination period in the final semester of enrolment.

Where this date is later than the due date for honours results for postgraduate research scholarships (eg, APA), an indicative mark will be provided by the student's supervisor in consultation with the Principal Examiner to be based, in part, upon presentation of a draft of the dissertation to the supervisor and the Principal Examiner. If no draft is provided, no indicative mark shall be provided.

Dissertations for examination can be simply bound or held together. Examined and amended dissertations are to be permanently bound (cloth binding preferably) with the student's name and dissertation title written on the spine. The examination copy and the permanently bound copy must include a CD-ROM or DVD which includes all software and digital documentation of the research work as appropriate. These are held permanently in the school's honours and master's dissertation collection. As a guide to your own dissertation you may wish to look at this collection of works.

The dissertation should be 15,000 to 25,000 words in length. A practice-based honours dissertation has different submission requirements, described below.

Types of dissertation

Students, in consultation with their supervisor or program coordinator, should complete one of the following types of dissertation:



Design-based
The aim of a design-based dissertation is to introduce a novel design work or component technology or technology-driven design process that is realised through the introduction, incorporation, enhancement or development of cutting-edge computing. The dissertation should report on the aims and objectives of the work, the rationale and process taken in its conception and development, and a detailed reflection or empirical evaluation of the design work. Sufficient digital documentation of the designed work should be provided with the dissertation.

Model-based
A model-based dissertation aims to create a computational model of a theory or phenomenon related to design or to model design computationally based on an analogy to another system. Phenomena that have been modelled computationally include creativity, motivation and emergence. Models of design based on analogies to other systems include evolution, co-evolution and systems biology. The computational model is implemented and validated or tested to ensure verisimilitude to the phenomenon being modelled.

Empirical
An empirical study aims to characterise or explain. In design studies, empirical research is often conducted on the cognitive behaviour of designers, the social dynamics of group-based design or participatory design, or a critical study of the design of specific objects. The student will utilise a variety of quantitative and qualitative research methods including survey, interview, experimentation, participatory action research and parametric or non-parametric modelling. Where the research will include human participants, students will need to follow the University ethics policies and guidelines for research involving humans. Due to the time frame for obtaining approval for such research, students are strongly encouraged to apply early in their honours research year or to conduct their research within the framework of an existing study led by their supervisor.

Practice-based
A practice-based honours dissertation needs to include creative practice as an integral component in relation to the issues and questions raised in this research, its outcomes and its research approach and methods. Creative outcomes need to be new or original artwork and can include the following areas:

  • video
  • composition
  • performance
  • digital photography
  • electronic installation
  • kinetic sculpture
  • robotic art and software/hardware prototype (code art, devices, smart materials, wearable technology).

The creative outcome cannot stand alone as research, but will be assessed together with a dissertation that includes research questions, objectives and a review of relevant artwork/artists in the chosen research area, as well as a written, critical reflection articulating the research process.

The practice-based dissertation includes different submission requirements:

  1. Written component: Dissertation of 6000 to 8000 words which is inclusive of a 1000 to 2000 word critical reflection articulating the research process.
  2. Digital documentation: Practice-based component (exhibition, performance or site-specific installation) in the form of either (i) a video DVD (5–10 mins) or audio recording (5–10 mins) or (ii) 5–10 high resolution images (eg TIFF format) or 3 x 30 second CD quality samples.
  3. Public exhibition component: The student is to organise a public exhibition (in the form of an exhibition, performance or site-specific installation) at least two weeks before the submission of the dissertation to the supervisor.
Non-completion

Students who do not complete the honours year will be awarded the pass degree. Those who terminate their study prior to the end of the second semester of study will be awarded a grade of DC or Discontinue without Failure.

Determination of honours

The honours dissertation itself receives a mark, which is recorded on the transcript next to DECO4004. The other units will be converted to SR for Satisfied Requirements upon successful completion of the dissertation.

The grade of honours is determined by using a mark derived from weighting the mark for the honours dissertation at 70 percent and the weighted average mark (WAM) of the pass degree at 30 percent. While this number is not recorded on the transcript, the final class of honours awarded is.

The honours degree of Bachelor of Design Computing shall be awarded to eligible students, with the following grades:

  • Honours Class I (with a mark of at least 80)
  • Honours Class II, Division 1 (with a mark of at least 75)
  • Honours Class II, Division 2 (with a mark of at least 70).

The University Medal may be awarded as described in the frequently asked questions section.

A student of the honours program who does not meet the requirements for award of honours shall be awarded the Bachelor of Design Computing pass degree.

Learning Outcomes

On successful completion of the program students will be able to:

No.

Course Learning Outcome

Graduate Quality

Graduate Quality

Graduate Quality

Graduate Quality

1

Apply human-centred design principles and practices to address a range of problems.

Depth of disciplinary expertise

Inventiveness

Interdisciplinary effectiveness

 

2

Appraise the value and limitations of data and data sources, including data from user research.

Critical thinking and Problem solving

Information and Digital literacy

Integrated professional, ethical and personal identity

 

3

Integrate design methods with computational and systems thinking, including by demonstrating familiarity with emerging technologies

Depth of disciplinary expertise

Information and Digital literacy

Critical thinking and Problem solving

 

4

Demonstrate aesthetic sense and apply it to communicate ideas and concepts.

Depth of disciplinary expertise

Communication (oral and written)

 

 

5

Synthesize creative solutions that balance conflicting design needs including feasibility, viability and desirability.

Depth of disciplinary expertise

Inventiveness

Critical thinking and Problem solving

 

6

Assess, reflect and provide feedback on one's own design process as well as that of others.

Critical thinking and Problem solving

Communication (oral and written)

Integrated professional, ethical and personal identity

Influence

7

Advocate for human-centred design perspectives and practices to diverse audiences and contexts.

Communication (oral and written)

Interdisciplinary effectiveness

Integrated professional, ethical and personal identity

Influence

8

Express how your design decisions innovate and/or add value.

Critical thinking and Problem solving

Communication (oral and written)

Influence

 

9

Demonstrate ethical and cultural competence in design by recognising the intended and unintended consequences of design decisions, as well as by considering diverse and underrepresented stakeholders.

Critical thinking and Problem solving

Cultural competence

Integrated professional, ethical and personal identity

 

10

Design, rigorously develop and appropriately communicate an original solution to a substantial real-world problem using human-centred design principles and practices.

Critical thinking and Problem solving

Communication (oral and written)

Inventiveness

Depth of disciplinary expertise

 

Unit of study Credit points A: Assumed knowledge P: Prerequisites C: Corequisites N: Prohibition Session

Bachelor of Design Computing Honours units of study

Candidates are required to complete all units of study listed in this table. Candidates enrol in A and B in their first semester and C and D in their second semester.
DECO4001
Design Computing Honours Research A
12   
Note: Department permission required for enrolment

Semester 1
Semester 2
DECO4002
Design Computing Honours Research B
12    C DECO4001
Semester 1
Semester 2
DECO4003
Design Computing Honours Research C
12    C DECO4002
Semester 1
Semester 2
DECO4004
Design Computing Honours Research D
12    C DECO4003
Semester 1
Semester 2

Bachelor of Design Computing Honours units of study

Candidates are required to complete all units of study listed in this table. Candidates enrol in A and B in their first semester and C and D in their second semester.
DECO4001 Design Computing Honours Research A

Credit points: 12 Teacher/Coordinator: Dr Somwrita Sarkar Session: Semester 1,Semester 2 Mode of delivery: Normal (lecture/lab/tutorial) day
Note: Department permission required for enrolment
Students must submit an Honours application form. Entry into Honours in the Bachelor of Design Computing requires you to have completed your pass degree with a weighted average mark of at least 70.
The Honours degree requires full-time study over two semesters (DECO4001 and DECO4002 and then DECO4003 and DECO4004). In special cases the Dean may approve a part-time enrolment over four semesters. The units are not assessed separately. A single dissertation is required. The appointment of a supervisor will depend on the topic chosen for the dissertation by the student.
The dissertation should be submitted by the end of the first week of the formal examination period in the semester in which DECO4004 Design Computing Honours Research D is taken.
DECO4002 Design Computing Honours Research B

Credit points: 12 Teacher/Coordinator: Dr Somwrita Sarkar Session: Semester 1,Semester 2 Corequisites: DECO4001 Mode of delivery: Normal (lecture/lab/tutorial) day
Students must submit an Honours application form. Entry into Honours in the Bachelor of Design Computing requires you to have completed your pass degree with a weighted average mark of at least 70.
The Honours degree requires full-time study over two semesters (DECO4001 and DECO4002 and then DECO4003 and DECO4004). In special cases the Dean may approve a part-time enrolment over four semesters. The units are not assessed separately. A single dissertation is required. The appointment of a supervisor will depend on the topic chosen for the dissertation by the student.
The dissertation should be submitted by the end of the first week of the formal examination period in the semester in which DECO4004 Design Computing Honours Research D is taken.
DECO4003 Design Computing Honours Research C

Credit points: 12 Teacher/Coordinator: Dr Somwrita Sarkar Session: Semester 1,Semester 2 Corequisites: DECO4002 Mode of delivery: Normal (lecture/lab/tutorial) day
Students must submit an Honours application form. Entry into Honours in the Bachelor of Design Computing requires you to have completed your pass degree with a weighted average mark of at least 70.
The Honours degree requires full-time study over two semesters (DECO4001 and DECO4002 and then DECO4003 and DECO4004). In special cases the Dean may approve a part-time enrolment over four semesters. The units are not assessed separately. A single dissertation is required. The appointment of a supervisor will depend on the topic chosen for the dissertation by the student.
The dissertation should be submitted by the end of the first week of the formal examination period in the semester in which DECO4004 Design Computing Honours Research D is taken.
DECO4004 Design Computing Honours Research D

Credit points: 12 Teacher/Coordinator: Dr Somwrita Sarkar Session: Semester 1,Semester 2 Corequisites: DECO4003 Mode of delivery: Normal (lecture/lab/tutorial) day
Students must submit an Honours application form. Entry into Honours in the Bachelor of Design Computing requires you to have completed your pass degree with a weighted average mark of at least 70.
The Honours degree requires full-time study over two semesters (DECO4001 and DECO4002 and then DECO4003 and DECO4004). In special cases the Dean may approve a part-time enrolment over four semesters. The units are not assessed separately. A single dissertation is required. The appointment of a supervisor will depend on the topic chosen for the dissertation by the student.
The dissertation should be submitted by the end of the first week of the formal examination period in the semester in which DECO4004 Design Computing Honours Research D is taken.