University of Sydney Handbooks - 2021 Archive

Download full 2021 archive Page archived at: Thu, 23 Sep 2021 13:38:13 +1000

Master of Architectural Science (Illumination Design)

Unit outlines will be available through Find a unit outline two weeks before the first day of teaching for 1000-level and 5000-level units, or one week before the first day of teaching for all other units.
 

Errata
Item Errata Date
1.

The probition has been removed for the following unit:

DESC9152 Practice of Lighting Desgn

21/1/2021

Unit of study Credit points A: Assumed knowledge P: Prerequisites C: Corequisites N: Prohibition Session

Illumination Design Stream

Master of Architectural Science (Illumination Design)

To qualify for a single stream, students must complete:
(a) 72 credit points in a single stream, including:
(i) minimum of 6 credit points Core Foundational units
(ii) minimum of 36 credit points Core Advanced units
(iii) maximum of 24 credit points elective units
(iv) minimum 6 credit points Capstone units
(b) Core units completed in excess of the minimum requirements may count as elective units.
To qualify for double stream, students must complete:
(a) complete 96 credit points in two streams
(i) nominate which of the streams is primary, and meet the foundation core, advanced core and capstone requirements for that stream
(b) nominate which of the streams is secondary, and complete 24 credit points of core advanced units for that stream.
(iii) a unit that is common to the requirements of both streams may count towards the requirements for both streams, but may only count once in the total credit points for the degree.

Graduate Diploma in Architectural Science (Illumination Design)

Students must complete 48 credit points in a single stream, including:
(i) minimum of 6 credit points Core Foundational units
(ii) minimum of 30 credit points Core Advanced units
(iii) maximum of 12 credit points elective units.
(b) Core units completed in excess of the minimum requirements may count as elective units of study.

Graduate Certificate in Architectural Science (Illumination Design)

Students must complete 24 credit points in a single stream, including:
(i) minimum of 6 credit points Core Foundational units
(ii) minimum of 12 credit points Core Advanced units
(iii) maximum of 6 credit points elective units

Core Foundational units

DESC9200
Introduction to Architectural Science
6      Semester 1

Core Advanced units

DESC9167
Light and Vision
6    N DESC9085
Semester 1
DESC9166
Photometry and Colorimetry
6    N DESC9072
Semester 1
DESC9164
Lighting Technologies
6    N DESC9063
Semester 2
DESC9154
Lighting Design Software
6    A DESC9166, fundamental knowledge of lighting
Semester 2
DESC9201
Indoor Environmental Quality (IEQ)
6      Semester 2
DESC9198
Subjective Analysis in Lighting Design
6    A Fundamental knowledge of lighting
Semester 2

Capstone (Master of Architectural Science only)

DESC9152
Practice of Lighting Design
6    A DESC9164
P At least 12 credit points of core advanced units of study in Illumination Design
N DESC9015
Semester 1

Electives

Electives may be chosen from the list below, or from any postgraduate units in the School of Architecture, Design and Planning, or, with the permission of the Associate Dean, from any other postgraduate course in the University subject to availability and permission from the relevant Unit of Study Coordinator.
DESC9153
Graduate Internship
6   
Note: Department permission required for enrolment
Masters students only. Graduate Diploma students with permission of the Program Coordinator. Advanced Standing will not be granted for this unit of study.
Intensive December
Intensive February
Intensive January
Intensive July
Intensive November
Semester 1
Semester 2
DESC9169
Daylight in Buildings
6    N DESC9106
Semester 2
DESC9147
Sustainable Building Design Principles
6    A Fundamental knowledge of building design
Semester 1
DESC9148
Sustainable Building Design Practice
6    A Fundamental knowledge of sustainable design
P DESC9201
Semester 1
DESC9074
Project Management
6      Semester 2
DESC9195
Building Economics
6      Semester 2
DESC9197
Energy Management and Code Compliance
6    A DESC9015

Note: Department permission required for enrolment

Semester 2
DESC9674
Building Information Management
6    P DESC9200 and DESC9014
Semester 1
DESC9675
High Performance Facades
6      Semester 1
DESC9300 in combination with either a Report or Dissertation may replace the capstone with the permission of the Program Director.
DESC9300
Research in Arch. and Design Science
6    N ARCF9001

Note: Department permission required for enrolment

Semester 1
Semester 2
ARCH9031
Research Report
12   
Note: Department permission required for enrolment
Available to Masters students only.
Semester 1
Semester 2
ARCH9045
Dissertation 1
12    P 48 credit points and a WAM of at least 75
C ARCH9046
N ARCH9031 or PLAN9018 or ARCH9060 or PLAN9010 or PLAN9011

Note: Department permission required for enrolment

Semester 1
Semester 2
ARCH9046
Dissertation 2
12    C ARCH9045
Semester 1
Semester 2

Illumination Design Stream

Master of Architectural Science (Illumination Design)

To qualify for a single stream, students must complete:
(a) 72 credit points in a single stream, including:
(i) minimum of 6 credit points Core Foundational units
(ii) minimum of 36 credit points Core Advanced units
(iii) maximum of 24 credit points elective units
(iv) minimum 6 credit points Capstone units
(b) Core units completed in excess of the minimum requirements may count as elective units.
To qualify for double stream, students must complete:
(a) complete 96 credit points in two streams
(i) nominate which of the streams is primary, and meet the foundation core, advanced core and capstone requirements for that stream
(b) nominate which of the streams is secondary, and complete 24 credit points of core advanced units for that stream.
(iii) a unit that is common to the requirements of both streams may count towards the requirements for both streams, but may only count once in the total credit points for the degree.

Graduate Diploma in Architectural Science (Illumination Design)

Students must complete 48 credit points in a single stream, including:
(i) minimum of 6 credit points Core Foundational units
(ii) minimum of 30 credit points Core Advanced units
(iii) maximum of 12 credit points elective units.
(b) Core units completed in excess of the minimum requirements may count as elective units of study.

Graduate Certificate in Architectural Science (Illumination Design)

Students must complete 24 credit points in a single stream, including:
(i) minimum of 6 credit points Core Foundational units
(ii) minimum of 12 credit points Core Advanced units
(iii) maximum of 6 credit points elective units

Core Foundational units

DESC9200 Introduction to Architectural Science

Credit points: 6 Teacher/Coordinator: Dr Jungsoo Kim Session: Semester 1 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
This unit aims to explore the scientific concepts of heat, light and sound, and from this develops foundational principles and methods applicable to buildings. It is divided into five topics: climate, thermal environment, mechanical services, lighting, and acoustics. Students will gain an understanding of the terminology, physical values and metrics in each of these topics, and how they apply to the design and function of buildings. Theoretical models to predict key physical values in buildings are presented and used in assessments. Learning is supported by measurement exercises. This unit has a focused pedagogy intended for all graduate students in Architectural Science. It is a common core unit for all of the programs (Audio and Acoustics, High Performance Buildings, Illumination Design and Sustainable Design). Students within these programs should undertake this unit in their first semester of study if possible.

Core Advanced units

DESC9167 Light and Vision

Credit points: 6 Teacher/Coordinator: Assoc Prof Wendy Davis Session: Semester 1 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Prohibitions: DESC9085 Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
In lighting design, the primary function of light is to facilitate visual perception of the illuminated scene. User-centred lighting design requires a thorough understanding of the biological link between light and vision. In this unit, students learn the fundamentals of the human visual system and the physical properties of light that impact perception. Specific topics include an overview of visual anatomy, the behaviour of the photoreceptors, and post-receptoral processing that leads to colour perception. The spectral, spatial, and temporal characteristics of visual processing are also covered. Important visual phenomena, such as chromatic adaptation and contrast sensitivity, are discussed. The link between fundamental knowledge of the human visual system and the practical application of lighting design is emphasised.
DESC9166 Photometry and Colorimetry

Credit points: 6 Teacher/Coordinator: Dr Wendy Davis Session: Semester 1 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Prohibitions: DESC9072 Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Measurements of light based only on physical properties are of limited use to the lighting designer. Instead, the tools to measure and communicate the characteristics of light sources and illumination consider the impact of the physical attributes of light on the human visual system. This unit covers the photometric measures related to the quantity of light and illumination and the colorimetric systems used to characterise the colour of lights and objects. The calculation methods underlying these measures are included, with an emphasis on useful simulation techniques. The derivations, meanings, proper applications, and limitations of these measurements systems are discussed. An overview of physical instruments for photometric and colorimetric measurements is included. Students learn to apply knowledge of photometry and colorimetry to evaluate lighting products.
DESC9164 Lighting Technologies

Credit points: 6 Teacher/Coordinator: Dr Wenye Hu Session: Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Prohibitions: DESC9063 Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
This unit covers the technologies employed in generating, distributing, and controlling light in illuminated environments. Students learn the advantages and disadvantages of different hardware options for various lighting applications. A brief history of lighting technologies and the physical processes involved with electrically generating light are included in this unit. Practical characteristics of currently popular lamp types, as well as emerging lighting technologies, are presented. The effects of integral luminaires and other light fittings on the resulting illumination are covered, as are the electrical requirements of different lighting technologies. This unit also includes calculation techniques for predicting the illumination in spaces from lighting products. The selection, operation, and implications of lighting control options are discussed. The underlying principles and practical consequences of the different characteristics of various lighting technologies are emphasised to enable students to independently evaluate future innovations in lighting technologies.
DESC9154 Lighting Design Software

Credit points: 6 Teacher/Coordinator: Wenye Hu Session: Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assumed knowledge: DESC9166, fundamental knowledge of lighting Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Modern lighting design practice requires the use of computer software to create design plans that can be easily modified, shared, and presented to clients. In this unit, students learn the basic operation of popular lighting design software packages, with particular emphasis on AGi32. This unit discusses the advantages and limitations of different calculation models used within lighting software. The fundamentals of rendering, importing and exporting data, selecting calculation modes, interpreting outputs, and complying with lighting design standards are included. Students gain hands-on experience modelling the effects of different lighting technologies within various architectural spaces. The use of lighting design software as a tool in the design process, rather than a replacement for it, is emphasised.
DESC9201 Indoor Environmental Quality (IEQ)

Credit points: 6 Teacher/Coordinator: Prof Richard De Dear Session: Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Humans' thermal, visual, auditory and olfactory senses determine the perceived quality of a built environment. This unit analyses built environments in context of these human factors. This unit relates human experience of buildings to the main dimensions of Indoor Environmental Quality (IEQ): thermal, acoustic, lighting and indoor pollution. This understanding of human comfort perceptions is contextualised by an understanding of the various approaches to the evaluation of built environmental performance. You will study post-occupancy evaluation tools and workplace productivity metrics. Regulations from Australia and abroad will be explored to understand their impact on acoustics, thermal comfort, lighting, indoor air quality and ventilation. The unit also pays particular attention to sustainability rating tools from around the world, including GreenStar, NABERS, LEED and BREEAM. This unit gives students extensive hands-on experience in laboratory- and field-based methods of IEQ research and building diagnostics. A recurring theme will be instrumental measurements of indoor environments, and how they can be analysed in relation to perceptual and behavioural data collected from occupants of those environments.
DESC9198 Subjective Analysis in Lighting Design

Credit points: 6 Teacher/Coordinator: Wenye Hu Session: Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assumed knowledge: Fundamental knowledge of lighting Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Lighting to a high aesthetic standard under pre-determined constraints requires an understanding of visual perception, quality of light, form and modelling, human sensitivity to a wide range of lighting environments, and a balanced approach involving critical reasoning and subjective analysis. This unit will be valuable for those interested in the lighting of architectural forms, objects and environments that demand a high level of aesthetic sensitivity. It will not only draw on learning outcomes from other illumination design units, but also be open to related disciplines with the aim of extending acquired skills beyond the confines of traditional lighting practices. Students will gain a broadened ability to interpret and respond to a wide range of illumination applications.

Capstone (Master of Architectural Science only)

DESC9152 Practice of Lighting Design

Credit points: 6 Teacher/Coordinator: Wenye Hu Session: Semester 1 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Prerequisites: At least 12 credit points of core advanced units of study in Illumination Design Prohibitions: DESC9015 Assumed knowledge: DESC9164 Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
This studio-based unit introduces students to the practical process of professional lighting design. Led by an experienced lighting designer, the content centres on a real lighting design problem. Students complete a group project, representative of the collaborative design in practice, which culminates in a client presentation. This unit covers the interpretation of design briefs, the process of conducting a site visit, the identification of lighting design problems, and the proposal of lighting solutions. The process of preparing and revising lighting plans is discussed. Techniques for successful presentations of the final plan to clients are also included.

Electives

Electives may be chosen from the list below, or from any postgraduate units in the School of Architecture, Design and Planning, or, with the permission of the Associate Dean, from any other postgraduate course in the University subject to availability and permission from the relevant Unit of Study Coordinator.
DESC9153 Graduate Internship

Credit points: 6 Teacher/Coordinator: Adrienne Keane Session: Intensive December,Intensive February,Intensive January,Intensive July,Intensive November,Semester 1,Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Normal (lecture/lab/tutorial) day
Note: Department permission required for enrolment
Note: Masters students only. Graduate Diploma students with permission of the Program Coordinator. Advanced Standing will not be granted for this unit of study.
The aims of the internship are to provide a direct link between the academic core of the course and the disciplines and methods of practice; to enable candidates to experience aspects of practice and provide the opportunity for them to work in areas of the field outside their specific expertise; to enable candidates to observe, analyse and comment on the interaction between theoretical and practical issues of their Program as it is practiced, and to establish connections between practice and the development of relevant research programs. The internship is intended to provide the opportunity for students to work in various situations in their Program's area. A secondary intention is that students use the opportunities of placement to broaden their own experience beyond the limitations of their chosen discipline. Candidates must find a suitable professional placement. Permission to enrol is given after the proposed placement has been approved by the Program Director. The host organisation will nominate a supervisor for the student for the internship. The student must complete at least 120 hours of full or part-time experience, supervised by a practicing designer (or other professional depending upon the field). A log-book of each day's work, signed by the supervisor must be submitted on completion. A 2000-word report on the benefits of the internship must also be produced. At the end of the internship the student will: demonstrate that they have completed a program of work (through a log-book); present a report; analyse their experiences and compare these to the theoretical content of the units they have completed, and suggest appropriate research directions so as to improve the complementarity of theory to practice.
DESC9169 Daylight in Buildings

Credit points: 6 Teacher/Coordinator: Dr Ozgur Gocer Session: Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Prohibitions: DESC9106 Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Daylight can be used in buildings to reduce the energy spent on electric lighting and create aesthetically appealing interiors. Design decisions that affect the success of daylighting in a building span every phase of the design process, from site selection to the application of interior finishes. This unit discusses the role of daylight in indoor illuminated environments. Calculations to predict the quantity and distribution of daylight in spaces and predict the effects of shading devices are covered. Students learn about the local and global variables that influence daylight availability, recognize the challenges and opportunities with daylight in interior spaces, and the appropriate use of daylighting technologies. Modelling tools (Radiance based) will be used in order to assess the efficacy of selected daylight strategies.
DESC9147 Sustainable Building Design Principles

Credit points: 6 Teacher/Coordinator: Daniel Ryan Session: Semester 1 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assumed knowledge: Fundamental knowledge of building design Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Many buildings claim to be sustainable, but what are the design principles that allow them to achieve this? This unit aims to develop a critical understanding in students of building design principles that reduce the impact of the built environment on energy and other resource flows. Students will gain an overview of technical strategies that reduce the environmental impact of buildings and develop an awareness of the benchmarks and metrics used to judge the implementation of environmental design principles. The unit pays particular attention to design principles that relate to the environmental performance of the building fabric and the thermal systems of buildings.
DESC9148 Sustainable Building Design Practice

Credit points: 6 Teacher/Coordinator: Dr Daniel Ryan Session: Semester 1 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Prerequisites: DESC9201 Assumed knowledge: Fundamental knowledge of sustainable design Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Assessing building performance and integrating environmental building systems and construction forms the core of sustainable building design practice. This advanced unit explores the methods, workflows and regulatory frameworks to design best-practice sustainable buildings. It develops your ability to work as a sustainable building consultant. You will learn how to evaluate and critique the environmental performance of real-world projects and set targets and apply strategies to improve designs. The unit also reviews working methods for integrated design and will develop your ability to communicate environmental performance to other design team members.
DESC9074 Project Management

Credit points: 6 Teacher/Coordinator: Prof Richard De Dear Session: Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Project Management is specific form of establishing, programming, and coordinating an activity having a specific start point and end point. This body of knowledge - as for example in the Project Management Book of Knowledge (PMBOK) - needs to be understood in general terms. Initially project managers must identify and define the services that are needed, (scope) and that their employers are willing to endorse. The activities requiring to be carried out need to be sorted and sequenced; the materials, labour and plant required need to be estimated and procured. Projects involve the management of information, and communications. This unit will develop the student's ability to ascertain and document the scope of a project, schedule a programme, and understand the difficulties in directing it. This unit approaches the profession of Project Management as a cooperative undertaking rather than adversarial: it promotes the adoption of soft-skills rather than that of forceful command and supervision.
DESC9195 Building Economics

Credit points: 6 Teacher/Coordinator: Prof Richard de Dear Session: Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Investors associated with the property industry require at the outset Return On Investment (ROI) evaluations before committing capital. This unit of study examines the economic principles as they apply to buildings, from capital growth and life cycle management perspectives. The focus is on economic and financial practices required for high performing building assets, contract procurement strategies, cash flow analysis, return on investment for retro-fitting, and economic appraisals of existing or new building assets. This unit will develop an understanding of carbon accounting in relation to building management and its importance to sustainable built asset portfolios. The unit, taught by case studies, will equip students with an understanding of economic principles and professional tools necessary for the procurement and management of real estate property, facilities and buildings at optimum economic and environmental performance.
DESC9197 Energy Management and Code Compliance

Credit points: 6 Teacher/Coordinator: Dr Jungsoo Kim Session: Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assumed knowledge: DESC9015 Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Note: Department permission required for enrolment
Objectives of this unit are to give students an understanding of energy consumption issues in buildings against the backdrop of escalating energy and carbon emission reduction targets for the built environment. Objectives of this unit are to give students an understanding of energy consumption issues in buildings against the backdrop of escalating energy and carbon emission reduction targets for the built environment. In order to meet these targets, new design and operational management techniques are needed, including energy auditing, retrofitting and energy efficiency optimisation techniques. This unit is primarily concerned with energy management in buildings and Code compliance in Australia. The unit will expose students to the processes and considerations involved in undertaking an energy audit in buildings. Active energy systems and their fundamentals may be reviewed. Finally, methods of assessing energy performance will be covered, with emphasis on energy simulation. Understanding and application of Australian standards and rating schemes will also be explored.
DESC9674 Building Information Management

Credit points: 6 Teacher/Coordinator: Jungsoo Kim Session: Semester 1 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Prerequisites: DESC9200 and DESC9014 Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
This unit will introduce students to the theory and practice of building information management and modelling. The unit starts with building management, which brings knowledge and skill on how to operate buildings to optimise performance. It also introduces Building Information Modelling (BIM), which is a digital representation of physical and functional characteristics of a facility. Building information models are shared knowledge resources about a facility, forming a reliable basis for decisions during its life-cycle from earliest conception to demolition. The unit explores the wider use of building information models not only in design but also in construction management, facility management, post construction evaluation, and retrofitting. By bringing together the building management and the information modelling, the unit responds to emergent requirements within the building sector for new tools and practices to offset the growing complexity in the design and construction of high performance buildings.
DESC9675 High Performance Facades

Credit points: 6 Teacher/Coordinator: Jungsoo Kim Session: Semester 1 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
This unit explores advanced building facades and their role in reducing environmental impacts while simultaneously enhancing indoor environment quality for building occupants. Advanced facades are those that are designed, analysed, procured and operated as a system. Optimisation of the often conflicting performance criteria of cooling load, lighting and daylighting, sound isolation, occupant comfort, costs and aesthetics requires an integrated approach from the whole team including architects, project managers, suppliers and engineers, from the earliest stages of the advanced facade design process. Specific topics to be covered in this unit include the integrated design approach to facades, the fundamental building physics determiningfacadeperformance, structural facade typologies, solar control facades, daylighting facades, double-skin facades, ventilated facades and dynamicfacadesystems. Variousanalyticalprocedures and simulation tools for the evaluation of high performancefacadedesigns will also be examined.Costs and benefits of various design approaches will also be assessed from both owner and occupant perspectives.
DESC9300 in combination with either a Report or Dissertation may replace the capstone with the permission of the Program Director.
DESC9300 Research in Arch. and Design Science

Credit points: 6 Teacher/Coordinator: Densil Cabrera. Jungsoo Kim Session: Semester 1,Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Prohibitions: ARCF9001 Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Block mode
Note: Department permission required for enrolment
TThis unit aims to prepare students for undertaking a research project in the various sub-disciplines of Architectural Science. It begins with the workshop-based presentation of foundations of experimental science relevant to research projects within these sub-disciplines. It highlights principles of experimental design and methods of data collection and analysis. Examples of previous projects undertaken by graduate students in Design Science will be presented, as appropriate, in any of the following areas: Audio and Acoustics, High Performance Buildings, Illumination Design and Sustainable Design. Although this unit has a focused pedagogy intended for all graduate students in Architectural Science, enrolment may be expected by other coursework students within the School of Architecture, Design and Planning.
ARCH9031 Research Report

Credit points: 12 Teacher/Coordinator: Adrienne Keane Session: Semester 1,Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Normal (lecture/lab/tutorial) day
Note: Department permission required for enrolment
Note: Available to Masters students only.
The report is a substantial piece of research conducted over one semester. It takes the form of a report (between 10,000 and 15,000 words) on an approved subject of your choice. The report is an opportunity to advance your knowledge and skills in a particular area. The objective of the report is to allow you to develop research and analytic skills by undertaking an in-depth study of your own selection. The expected learning outcomes of the report include the ability to think critically about a problem and develop an appropriate research methodology or analytical approach to address it; identify and access appropriate sources of information, research and literature relevant to the issues; undertake relevant primary and secondary research; and present your findings in a way that demonstrates academic and professional competence. A report generally includes a literature review to delineate a problem; a statement of research aims or objectives, as well as research questions; an explanation of research methods; presentation and analysis of data; and discussion of conclusions. Permission to continue the Report may be subject to a satisfactory research proposal being approved by your supervisor by week 3 of semester. Reports are due at the end of the first week of exams for the semester in which you are enrolled. The assessment is based solely on the submission of your report. The report is generally marked by two examiners, neither of whom is your supervisor.
ARCH9045 Dissertation 1

Credit points: 12 Teacher/Coordinator: Adrienne Keane Session: Semester 1,Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Prerequisites: 48 credit points and a WAM of at least 75 Corequisites: ARCH9046 Prohibitions: ARCH9031 or PLAN9018 or ARCH9060 or PLAN9010 or PLAN9011 Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Normal (lecture/lab/tutorial) day
Note: Department permission required for enrolment
ARCH9045 and ARCH9046 Dissertation 1 and 2 are only available to candidates with permission from an appropriate supervisor. Planning students should take PLAN9010 and PLAN9011 Planning Dissertations 1 and 2. Students enrol either full time over one semester (ARCH9045 and ARCH9046) or part time over two semesters (ARCH9045 then ARCH9046). The units are not assessed separately - a single dissertation is required. The appointment of a supervisor will depend on the topic chosen for the dissertation by the student. Students and their supervisors should complete an Independent Study Approval form and return it to the Student Administration Centre to effect enrolment. The aim of the dissertation is to train the student in how to undertake advanced study. The student should learn how to examine published and unpublished data, survey and experimental results, set objectives, organise a program of work, analyse information, evaluate this in relation to existing knowledge and document the work; and to allow the student to pursue an area of interest in greater depth than is possible in coursework or to investigate an area of interest which is not covered in coursework. The dissertation will normally involve a critical review of published material in a specified subject area, but it may also be an experimental or theoretical investigation, a feasibility study, a case study, a computer program, or other work demonstrating the student's analytical ability. The dissertation should be 15,000 to 25,000 words in length. The dissertation should contain a literature review, a research methodology, analysis of data, a discussion of results and conclusions. The dissertation will be judged on the extent and quality of the student's work, and in particular on how critical, perceptive and constructive the student has been in assessing his or her own work and that of others. Three typed A4 sized copies of the dissertation are required to be presented for examination. These may be in either temporary or permanent binding. If in temporary binding they must be able to withstand ordinary handling and postage. The preferred method is "perfect binding"; spring back, ring back or spiral binding is not permitted. Students are required to submit one copy in permanent binding on acid free paper for the library, including any emendations recommended by the examiners. For more details see the requirements for the PhD thesis in the Postgraduate Research Studies Handbook. Dissertations are due at the end of the first week of exams for the semester in which you are enrolled for Dissertation 2. The assessment is based solely on the submission of your dissertation. The dissertation is generally marked by two examiners.
ARCH9046 Dissertation 2

Credit points: 12 Teacher/Coordinator: An academic supervisor is required. Discuss with your program coordinator. Session: Semester 1,Semester 2 Classes: Refer to the unit of study outline https://www.sydney.edu.au/units Corequisites: ARCH9045 Assessment: Refer to the unit of study outline https://www.sydney.edu.au/units Mode of delivery: Normal (lecture/lab/tutorial) day
ARCH9045 and ARCH9046 Dissertation 1 and 2 are only available to candidates with permission from an appropriate supervisor. Planning students should take PLAN9010 and PLAN9011 Planning Dissertations 1 and 2. Students enrol either full time over one semester (ARCH9045 and ARCH9046) or part time over two semesters (ARCH9045 then ARCH9046). The units are not assessed separately - a single dissertation is required. The appointment of a supervisor will depend on the topic chosen for the dissertation by the student. Students and their supervisors should complete an Independent Study Approval form and return it to the Student Administration Centre to effect enrolment. The aim of the dissertation is to train the student in how to undertake advanced study. The student should learn how to examine published and unpublished data, survey and experimental results, set objectives, organise a program of work, analyse information, evaluate this in relation to existing knowledge and document the work; and to allow the student to pursue an area of interest in greater depth than is possible in coursework or to investigate an area of interest which is not covered in coursework. The dissertation will normally involve a critical review of published material in a specified subject area, but it may also be an experimental or theoretical investigation, a feasibility study, a case study, a computer program, or other work demonstrating the student's analytical ability. The dissertation should be 15,000 to 25,000 words in length. The dissertation should contain a literature review, a research methodology, analysis of data, a discussion of results and conclusions. The dissertation will be judged on the extent and quality of the student's work, and in particular on how critical, perceptive and constructive the student has been in assessing his or her own work and that of others. Three typed A4 sized copies of the dissertation are required to be presented for examination. These may be in either temporary or permanent binding. If in temporary binding they must be able to withstand ordinary handling and postage. The preferred method is "perfect binding"; spring back, ring back or spiral binding is not permitted. Students are required to submit one copy in permanent binding on acid free paper for the library, including any emendations recommended by the examiners. For more details see the requirements for the PhD thesis in the Postgraduate Research Studies Handbook. Dissertations are due at the end of the first week of exams for the semester in which you are enrolled for Dissertation 2. The assessment is based solely on the submission of your dissertation. The dissertation is generally marked by two examiners.