AERO3711: Semester 2, 2025

Units AERO3711 Semester 2 2025 [Supervision]

Unit outline_

AERO3711: Aerospace Engineering Project 2

Semester 2, 2025 [Supervision] - Camperdown/Darlington, Sydney

Overview

This unit of study aims to develop deeper practical knowledge in the area of Aerospace systems engineering. Students who take this subject would be interested in developing design skills by working on the sub-system of a real satellite or launch vehicle, autonomous vehicle research, flight simulation research or advanced propulsion systems research.

Unit details and rules

Academic unit	Aerospace, Mechanical and Mechatronic
Credit points	6
Prerequisites ?	None
Corequisites ?	None
Prohibitions ?	None
Assumed knowledge ?	Must be enrolled in the Aeronautical stream or the Space major, have completed at least 2 years of study in the BE Hons, and have a WAM of 75 or higher
Available to study abroad and exchange students	No

Teaching staff

Coordinator	KC Wong, kc.wong@sydney.edu.au

Assessment

The census date for this unit availability is 1 September 2025

Details
Criteria

Type	Description	Weight	Due	Length	Use of AI
Q&A following presentation, submission or placement	Presentation of Research Project Regular progress presentations of research project to peers and supervisor, with Q&A after.	20%	Multiple weeks	15-20 minutes expected	AI prohibited
Outcomes assessed:
Research analysis	Research Progress Report Report on progress of research project.	10%	Week 07 Due date: 15 Sep 2025 at 23:59 Closing date: 21 Sep 2025	Expected to be no more than 10 pages	AI allowed
Outcomes assessed:
Research analysis	Final Research Project Report Final report of research project undertaken.	60%	Week 13 Due date: 07 Nov 2025 at 23:59 Closing date: 16 Nov 2025	Expected to be no more than 40 pages.	AI allowed
Outcomes assessed:
Portfolio or journal	Research Project Logbook Logbook of work in progress including challenges and potential resolution.	10%	Week 13 Due date: 07 Nov 2025 at 23:59 Closing date: 16 Nov 2025	Weekly entries expected	AI allowed
Outcomes assessed:

Assessment summary

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2014 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name	Mark range	Description
High distinction	85 - 100
Distinction	75 - 84
Credit	65 - 74
Pass	50 - 64
Fail	0 - 49	When you don’t meet the learning outcomes of the unit to a satisfactory standard.

For more information see guide to grades.

Use of generative artificial intelligence (AI)

You can use generative AI tools for open assessments. Restrictions on AI use apply to secure, supervised assessments used to confirm if students have met specific learning outcomes.

Refer to the assessment table above to see if AI is allowed, for assessments in this unit and check Canvas for full instructions on assessment tasks and AI use.

If you use AI, you must always acknowledge it. Misusing AI may lead to a breach of the Academic Integrity Policy.

Visit the Current Students website for more information on AI in assessments, including details on how to acknowledge its use.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

Deduction of 5% of the maximum mark for each calendar day after the due date.
After ten calendar days late, a mark of zero will be awarded.

Academic integrity

The University expects students to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.

Our website provides information on academic integrity and the resources available to all students. This includes advice on how to avoid common breaches of academic integrity. Ensure that you have completed the Academic Honesty Education Module (AHEM) which is mandatory for all commencing coursework students

Penalties for serious breaches can significantly impact your studies and your career after graduation. It is important that you speak with your unit coordinator if you need help with completing assessments.

Visit the Current Students website for more information on AI in assessments, including details on how to acknowledge its use.

Learning support

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

Support for students

The Support for Students Policy reflects the University’s commitment to supporting students in their academic journey and making the University safe for students. It is important that you read and understand this policy so that you are familiar with the range of support services available to you and understand how to engage with them.

The University uses email as its primary source of communication with students who need support under the Support for Students Policy. Make sure you check your University email regularly and respond to any communications received from the University.

Learning resources and detailed information about weekly assessment and learning activities can be accessed via Canvas. It is essential that you visit your unit of study Canvas site to ensure you are up to date with all of your tasks.

If you are having difficulties completing your studies, or are feeling unsure about your progress, we are here to help. You can access the support services offered by the University at any time:

Support and Services (including health and wellbeing services, financial support and learning support)
Course planning and administration
Meet with an Academic Adviser

Weekly schedule

WK	Topic	Learning activity	Learning outcomes
Weekly	Working with a research supervisor to develop deeper practical knowledge in the area of Aerospace systems engineering.	Project (150 hr)

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Learning outcomes

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

Outcomes
Graduate qualities

At the completion of this unit, you should be able to:

LO1. demonstrate deeper understanding of specific systems as used in the aerospace environment
LO2. conduct a paper design of an aerospace component sub-system
LO3. apply a “systems engineering” approach to aerospace design.
LO4. locate, synthesise, and apply relevant information for the design of aerospace systems
LO5. write up a convincing project design document
LO6. work and communicate effectively with your supervisor and other team members to undertake effective project management

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1	Depth of disciplinary expertise Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.
GQ2	Critical thinking and problem solving Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.
GQ3	Oral and written communication Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.
GQ4	Information and digital literacy Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.
GQ5	Inventiveness Generating novel ideas and solutions.
GQ6	Cultural competence Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.
GQ7	Interdisciplinary effectiveness Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.
GQ8	Integrated professional, ethical, and personal identity An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.
GQ9	Influence Engaging others in a process, idea or vision.

Outcome map

Learning outcomes	Graduate qualities
Learning outcomes

Responding to student feedback

This section outlines changes made to this unit following staff and student reviews.

Students must have evidence of approved project and supervisor before enrolling in unit.

Additional information

Students intending to take this must have discussed with, and have written agreement from academic supervisors on a suitable project related to Aerospace Engineering before seeking enrolment approval.

AMME students meeting minimum requirements can seek approval to enrol in this UoS.

Note1: A WAM of > 75% is required as well as departmental permission from the Unit coordinator.

Note2: There is a cap on the number of students allowed to do this subject in any one semester - depending on resources available.

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.

Current students

Overview

Overview

Unit details and rules

Teaching staff

Assessment

Assessment

Assessment summary

Assessment criteria

Use of generative artificial intelligence (AI)

Late submission

Academic integrity

Learning support

Learning support

Simple extensions

Special consideration

Using AI responsibly

Support for students

Weekly schedule

Weekly schedule

Study commitment

Learning outcomes

Learning outcomes

Graduate qualities

Outcome map

Responding to student feedback

Responding to student feedback

Additional information

Additional information

Disclaimer

On this page

Useful links