Skip to main content
Unit of study_

DESC9134: Audio and Acoustics Seminar

Semester 1, 2024 [Normal day] - Camperdown/Darlington, Sydney

This unit introduces students to a broad range of current research in audio and acoustics, and gives them experience in research. It consists of a series of seminars on current research projects presented by active researchers in audio and acoustics, together with individual or small-group supervision of small-scale research projects. By completing this unit students will gain an understanding of the research process, and receive some modest experience in research. They will appreciate a range of research methods and subject areas at the forefront of audio and acoustics. They will be in a good position to assess their interest in undertaking further academic research.

Unit details and rules

Unit code DESC9134
Academic unit Architectural and Design Science
Credit points 6
Prohibitions
? 
None
Prerequisites
? 
DESC9090 or DESC9133
Corequisites
? 
None
Assumed knowledge
? 

DESC9138 and DESC9011

Available to study abroad and exchange students

Yes

Teaching staff

Coordinator Densil Cabrera, densil.cabrera@sydney.edu.au
Lecturer(s) Yoshimi Hasegawa, yoshimi.hasegawa@sydney.edu.au
Jonothan Holmes Holmes, jonothan.holmes@sydney.edu.au
Type Description Weight Due Length
Assignment Final paper
Written report
40% Formal exam period
Due date: 05 Jun 2024 at 23:59
2500 words
Outcomes assessed: LO1 LO2
Assignment First draft
Written report
25% Week 11
Due date: 09 May 2024 at 09:00
2000 words
Outcomes assessed: LO2
Assignment Peer review
Written report
10% Week 12
Due date: 16 May 2024 at 09:00
200 words
Outcomes assessed: LO2
Presentation Paper presentation
Oral presentation
25% Week 13 10-15 minutes
Outcomes assessed: LO1 LO2

Assessment summary

  • First draft: This should be a reasonably complete write-up of the project, following the report template that is provided on Canvas.
  • Peer review: Students write reviews of selected first draft papers submitted by other DESC9134 students.
  • Final paper: These should be greatly improved versions of the first draft reports.
  • Paper presentation: Working in the same group of students that collaborated to produce the written final paper, a presentation should be prepared by the team, and each team member makes some portion of the presentation.
Detailed information for each assessment can be found on Canvas.
 
 

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2021 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction an excellent standard, a credit a good standard, and a pass an acceptable standard.

Result name

Mark range

Description

High distinction

85 - 100

Work of outstanding quality, demonstrating mastery of the learning outcomes
assessed. The work shows significant innovation, experimentation, critical
analysis, synthesis, insight, creativity, and/or exceptional skill.

Distinction

75 - 84

Work of excellent quality, demonstrating a sound grasp of the learning outcomes
assessed. The work shows innovation, experimentation, critical analysis,
synthesis, insight, creativity, and/or superior skill.

Credit

65 - 74

Work of good quality, demonstrating more than satisfactory achievement of the
learning outcomes assessed, or work of excellent quality for a majority of the
learning outcomes assessed.

Pass

50 - 64

Work demonstrating satisfactory achievement of the learning outcomes
assessed.

Fail

0 - 49

Work that does not meet the learning outcomes of the unit to a satisfactory standard.

For more information see sydney.edu.au/students/guide-to-grades.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

  • Deduction of 5% of the maximum mark for each calendar day after the due date.
  • After ten calendar days late, a mark of zero will be awarded.

This unit has an exception to the standard University policy or supplementary information has been provided by the unit coordinator. This information is displayed below:

In accordance with University of Sydney School of Architecture Design and Planning Faculty Resolutions 2022, for every calendar day up to and including 10 calendar days after the due date, a penalty of 5% of the maximum awardable marks will be applied to the late work. For work submitted more than 10 calendar days after the due date, a mark of zero will be awarded.

Academic integrity

The Current Student website  provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.  

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

You may only use artificial intelligence and writing assistance tools in assessment tasks if you are permitted to by your unit coordinator, and if you do use them, you must also acknowledge this in your work, either in a footnote or an acknowledgement section.

Studiosity is permitted for postgraduate units unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission.

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

Support for students

The Support for Students Policy 2023 reflects the University’s commitment to supporting students in their academic journey and making the University safe for students. It is important that you read and understand this policy so that you are familiar with the range of support services available to you and understand how to engage with them.

The University uses email as its primary source of communication with students who need support under the Support for Students Policy 2023. Make sure you check your University email regularly and respond to any communications received from the University.

Learning resources and detailed information about weekly assessment and learning activities can be accessed via Canvas. It is essential that you visit your unit of study Canvas site to ensure you are up to date with all of your tasks.

If you are having difficulties completing your studies, or are feeling unsure about your progress, we are here to help. You can access the support services offered by the University at any time:

Support and Services (including health and wellbeing services, financial support and learning support)
Course planning and administration
Meet with an Academic Adviser

WK Topic Learning activity Learning outcomes
Week 01 Unit Introduction and Laboratory Practice Science laboratory (3 hr) LO2
Week 02 Sustainable Design Goals (SDGs) in Acoustics Lecture (3 hr) LO1 LO2
Week 03 High Resolution Spatial Acoustic Measurements Science laboratory (3 hr) LO1 LO2
Week 04 Human Echolocation and Acoustic Reflectors - Acoustic Designs for Blind and Low Vision Individuals (SDG9) Lecture (3 hr) LO1 LO2
Week 05 Acoustic Simulation Methods Lecture (3 hr) LO1 LO2
Week 06 Soundscapes (SDG11) Lecture (3 hr) LO1 LO2
Week 08 Head-Related Transfer Function Measurement and Applications Lecture (3 hr) LO1 LO2
Week 09 Sound and Health (SDG3) Lecture (3 hr) LO1 LO2
Week 10 Aural Diversity (Leave No-One Behind, LNOB) Seminar (3 hr) LO1 LO2
Week 11 Lab Day Science laboratory (3 hr) LO1 LO2
Week 12 Research Methods Review Lecture (3 hr) LO1 LO2
Week 13 Seminar Oral Presentations of Nearly Completed Work Seminar (3 hr) LO1 LO2

Attendance and class requirements

 

Please refer to the Resolutions of the University School, relevant parts of which are presented below.

Students are required to be in attendance at the correct time and place of any formal or informal assessments (this particularly applies to the oral presentation in Week 13). Non-attendance on any grounds that is insufficient to claim special consideration or disability adjustment will result in the forfeiture of marks associated with the assessment.


A student enrolled in a unit of study must comply with the requirements set out in the unit of study outline about undertaking the unit of study. Students are expected to attend a minimum of 90% of timetabled activities for each unit of study, unless granted exemption by the Head of School and Dean, Associate Dean Education or relevant Unit Coordinator. The Head of School and Dean, Associate Dean Education or relevant Unit Coordinator may determine that a student fails a unit of study because of inadequate attendance. Alternatively, at their discretion, they may set additional assessment items when attendance is lower than 90%.

 

In the case of serious illness, injury or misadventure, a student may apply for special consideration subject to the student meeting all assessment requirements and providing satisfactory supporting documentation.

 

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

At the completion of this unit, you should be able to:

  • LO1. demonstrate through both written and oral reports an understanding of the research process, including the formulation of good research questions and appropriate methods by which those questions may be answered
  • LO2. exhibit an appreciation of a wide range of research methods and subject areas at the forefront of audio and acoustics.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1 Depth of disciplinary expertise

Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.

GQ2 Critical thinking and problem solving

Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.

GQ3 Oral and written communication

Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.

GQ4 Information and digital literacy

Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.

GQ5 Inventiveness

Generating novel ideas and solutions.

GQ6 Cultural competence

Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.

GQ7 Interdisciplinary effectiveness

Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.

GQ8 Integrated professional, ethical, and personal identity

An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.

GQ9 Influence

Engaging others in a process, idea or vision.

Outcome map

Learning outcomes Graduate qualities
GQ1 GQ2 GQ3 GQ4 GQ5 GQ6 GQ7 GQ8 GQ9

This section outlines changes made to this unit following staff and student reviews.

This unit changes every year, depending on the opportunities available for projects. Based on feedback from last year, we are including a greater focus on formally taught content, which we hope will better support projects.

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.