Outline

Overview

This unit of study continues from semester one. Refer to semester one description.

Unit details and rules

Academic unit	Discipline of Oral Health
Credit points	6
Prerequisites ?	ORHL3103
Corequisites ?	ORHL3201 and ORHL3202
Prohibitions ?	None
Assumed knowledge ?	None
Available to study abroad and exchange students	Yes

Teaching staff

Coordinator	Karen Lansdown, karen.lansdown@sydney.edu.au
Lecturer(s)	Kimberly Kyle Mathieu Coulton, kimberly.coulton@sydney.edu.au
	Wendy Jane Currie, wendy.currie@sydney.edu.au
	Kelly-Jean Burden, kelly.burden@sydney.edu.au
	Heidi Peacock, heidi.peacock@sydney.edu.au

Type	Description	Weight	Due	Length
Skills-based evaluation	Formative Oral Comprehensive (ORHL3203) Oral comprehensive (viva voce): Please see CANVAS for more information.	0%	-	10 minutes
Outcomes assessed:
Creative assessment / demonstration	Summative Oral Comprehesive (ORHL3203) Oral comprehensive (viva voce): Please see CANVAS for more information.	50%	Formal exam period Due date: 24 Nov 2021 at 08:30	1 hour
Outcomes assessed:
Assignment	Summative Integrated Case Portfolio (ORHL3203) Critical review of an established case	50%	Formal exam period Due date: 14 Nov 2021 at 23:59 Closing date: 24 Nov 2021	max 60 pages exc. PICO and references
Outcomes assessed:
= hurdle task ?

Assessment summary

All assessments must be submitted by the due date. Students are expected to manage their time and to prioritise tasks to meet deadlines. Assessment items submitted after the due date without an approved extension using a special consideration or special arrangement form will incur penalties.

Late penalties will apply once the due date and time has passed. The closing date (if specified) is the final date for late submissions; after this date no submissions will be accepted.

Assessment criteria

The University awards common result grades, set out in the Coursework Policy 2014 (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name

Mark range

Description

High distinction

85 - 100

Awarded when you demonstrate the learning outcomes for the unit at an exceptional standard, as defined by grade descriptors or exemplars outlined by your faculty or school.

Distinction

75 - 84

Awarded when you demonstrate the learning outcomes for the unit at a very high standard, as defined by grade descriptors or exemplars outlined by your faculty or school.

Credit

65 - 74

Awarded when you demonstrate the learning outcomes for the unit at a good standard, as defined by grade descriptors or exemplars outlined by your faculty or school.

Pass

50 - 64

Awarded when you demonstrate the learning outcomes for the unit at an acceptable standard, as defined by grade descriptors or exemplars outlined by your faculty or school.

Fail

0 - 49

When you don’t meet the learning outcomes of the unit to a satisfactory standard.

For more information see guide to grades.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

Deduction of 5% of the maximum mark for each calendar day after the due date.
After ten calendar days late, a mark of zero will be awarded.

Academic integrity

The Current Student website provides information on academic integrity and the resources available to all students. The University expects students and staff to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.

We use similarity detection software to detect potential instances of plagiarism or other forms of academic integrity breach. If such matches indicate evidence of plagiarism or other forms of academic integrity breaches, your teacher is required to report your work for further investigation.

Use of generative artificial intelligence (AI) and automated writing tools

You may only use generative AI and automated writing tools in assessment tasks if you are permitted to by your unit coordinator. If you do use these tools, you must acknowledge this in your work, either in a footnote or an acknowledgement section. The assessment instructions or unit outline will give guidance of the types of tools that are permitted and how the tools should be used.

Your final submitted work must be your own, original work. You must acknowledge any use of generative AI tools that have been used in the assessment, and any material that forms part of your submission must be appropriately referenced. For guidance on how to acknowledge the use of AI, please refer to the AI in Education Canvas site.

The unapproved use of these tools or unacknowledged use will be considered a breach of the Academic Integrity Policy and penalties may apply.

Studiosity is permitted unless otherwise indicated by the unit coordinator. The use of this service must be acknowledged in your submission as detailed on the Learning Hub’s Canvas page.

Outside assessment tasks, generative AI tools may be used to support your learning. The AI in Education Canvas site contains a number of productive ways that students are using AI to improve their learning.

Learning support

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

Weekly schedule

WK	Topic	Learning activity
Ongoing	Individual mentor sessions (K. Lansdown / K. Coulton) By appointment	One-to-one tuition (0.5 hr)
Week -01	Case-based learning 2 - Paediatric W. Currie & H. Peacock	Tutorial (2 hr)
Week -03	Case-based learning 1 - Integrated Theory H. Peacock & K. Burden	Tutorial (2 hr)
Week 03	Case-based learning 3 - Periodontics K. Coulton, K. Lansdown	Tutorial (2 hr)
Week 05	Case-based learning 4 - Paediatric W. Currie & K. Lansdown	Tutorial (2 hr)
Week 07	Discussion of final case portfolio K. Coulton, K. Lansdown & K. Burden	Tutorial (1 hr)
Week 09	Preparation for Summative Oral Comprehensive exam K. Coulton, K. Lansdown & K. Burden	Tutorial (2 hr)
Week 12	Oral Comprehensive Formative assessment feedback K. Coulton, K. Lansdown & K. Burden	Tutorial (1 hr)

Attendance and class requirements

Attendance: Attendance is a professional responsibility required of all students admitted to academic programs within the Sydney Dental School. All programs in the Sydney Dental School have a 90% attendance policy, for all compulsory components of Units of Study, as detailed in the Faculty of Dentistry Attendance Provisions 2015. This includes all clinical and practical sessions. The course requirements cannot be satisfied if more than 10% of any section of a course is missed for any reason.
Professionalism: Students in all Sydney Dental School programs are subject to the Faculty of Medicine and Health Professionalism Requirements 2019 and the Faculty of Medicine and Health Professionalism Provisions 2019. Professionalism is an essential component of developing competency to practice. It is important for students to demonstrate professional behaviour in all contexts and environments. In accordance with these local provisions: candidates who demonstrate serious or repeated unprofessional behaviour may be required to show cause as to why their enrolment should be continued. Failure to show cause may result in exclusion from the course.

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Learning outcomes

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

Outcomes
Graduate qualities

At the completion of this unit, you should be able to:

LO1. display the knowledge for a developing understanding of the full scope of practice of an oral health therapist
LO2. demonstrate competency integrating all previous learning and clinical experience into a deeper understanding of clinical reasoning, diagnosis, treatment planning and intervention and control of disease
LO3. discuss the research and communication skills necessary for the acquisition, advancement and dissemination of knowledge
LO4. demonstrate developing competency integrating all previous learning and clinical experience into a deeper understanding of clinical reasoning, diagnosis, treatment planning and intervention and control of disease
LO5. discuss the methods and benefits, and analyse the findings of additional assessment data, including diagnostic tests, study models; intraoral photographs; and vitality testing, in both written and oral formats
LO6. present a diagnostic summary of the case with a thorough and systematic analyses of relevant patient data and risk factors
LO7. display the necessary knowledge for a comprehensive understanding of the full scope of practice of an oral health therapist
LO8. demonstrate effective organisation and time management skills, sound scientific and medical knowledge with evidence-based dental knowledge
LO9. demonstrate developing/comprehensive organisation and time management skills, sound scientific and medical knowledge with evidence-based dental knowledge
LO10. identify and discuss the components of a patient case file, including all data gathered, the links that exist between these, and the therapeutic interventions and strategies of patient care, recognising the need for consultation and referral
LO11. within the scope of an oral health therapist and congruent with treatment plans by the dentist, demonstrate the ability to establish and implement a treatment plan using an evidence-based and patient-centred approach

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1	Depth of disciplinary expertise Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.
GQ2	Critical thinking and problem solving Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.
GQ3	Oral and written communication Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.
GQ4	Information and digital literacy Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.
GQ5	Inventiveness Generating novel ideas and solutions.
GQ6	Cultural competence Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.
GQ7	Interdisciplinary effectiveness Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.
GQ8	Integrated professional, ethical, and personal identity An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.
GQ9	Influence Engaging others in a process, idea or vision.

Outcome map

Learning outcomes	Graduate qualities
Learning outcomes

Responding to student feedback

This section outlines changes made to this unit following staff and student reviews.

No changes have been made since this unit was last offered.

Additional information

Work, health and safety

Students must comply with work health and safety, infection control and dress standard policies of all laboratories, placement sites and Local Health Districts (LHDs).

Disclaimer

The University reserves the right to amend units of study or no longer offer certain units, including where there are low enrolment numbers.

To help you understand common terms that we use at the University, we offer an online glossary.

Current students

Overview

Overview

Unit details and rules

Teaching staff

Assessment

Assessment

Assessment summary

Assessment criteria

Late submission

Academic integrity

Learning support

Learning support

Simple extensions

Special consideration

Using AI responsibly

Weekly schedule

Weekly schedule

Attendance and class requirements

Study commitment

Learning outcomes

Learning outcomes

Graduate qualities

Outcome map

Responding to student feedback

Responding to student feedback

Additional information

Additional information

Work, health and safety

Disclaimer

On this page

Useful links

ORHL3203: Comprehensive Oral Health Management II

Semester 2, 2021 [Normal day] - Westmead, Sydney

Overview

Overview

Unit details and rules

Teaching staff

Assessment

Assessment

Assessment summary

Assessment criteria

Late submission

Academic integrity

Learning support

Learning support

Simple extensions

Special consideration

Using AI responsibly

Weekly schedule

Weekly schedule

Attendance and class requirements

Study commitment

Learning outcomes

Learning outcomes

Graduate qualities

Outcome map

Responding to student feedback

Responding to student feedback

Additional information

Additional information

Work, health and safety

Disclaimer

On this page

Useful links