Outline

Overview

Project Studies Thesis provides an opportunity for students to undertake a major project in a specialised area relevant to Project Management. It can be spread over a whole year, in two successive Units of Study of 6 credits points each, Project Studies Thesis A (PMGT5883) and Project Studies Thesis B (PMGT5884). Students will work individually to plan and write reports. Project Studies Thesis A covers the first half of the work required for a complete thesis project and includes almost all project planning, a major proportion of the necessary background research, and a significant proportion of the investigative or design work required of the project.

Unit details and rules

Academic unit	Project Management
Credit points	6
Prerequisites ?	>=80 in PMGT5862 and WAM >= 75 in enrolled MPM/MPPM program
Corequisites ?	None
Prohibitions ?	None
Assumed knowledge ?	None
Available to study abroad and exchange students	No

Teaching staff

Coordinator	Nader Naderpajouh, nader.naderpajouh@sydney.edu.au
Lecturer(s)	Michael Buhagiar, michael.buhagiar@sydney.edu.au

Assessment

The census date for this unit availability is 1 September 2025

Details
Criteria

Type	Description	Weight	Due	Length	Use of AI
Research analysis	Literature review Literature Review for chosen thesis topic	35%	STUVAC Due date: 16 Nov 2025 at 23:59	3500-4000 words	AI allowed
Outcomes assessed:
Portfolio or journal	Research methodology Presentation of relevant literature, gap, research question & design	35%	STUVAC Due date: 16 Nov 2025 at 23:59	2500 - 3000 words	AI allowed
Outcomes assessed:
Portfolio or journal	Research plan Project Management Research and research plan	10%	Week 05 Due date: 07 Sep 2025 at 23:59	n/a	AI allowed
Outcomes assessed:
Q&A following presentation, submission or placement	Seminar presentation A Presentation of relevant literature, gap, research question & design	20%	Week 11 Due date: 26 Oct 2025 at 23:59	10 minute presentation	AI prohibited
Outcomes assessed:
= hurdle task ?

Assessment summary

Assessment criteria

The University awards common result grades, set out in the Coursework Policy (Schedule 1).

As a general guide, a high distinction indicates work of an exceptional standard, a distinction a very high standard, a credit a good standard, and a pass an acceptable standard.

Result name	Mark range	Description
High distinction	85 - 100	Awarded when you demonstrate the learning outcomes for the unit at an exceptional standard, as defined by grade descriptors or exemplars outlined by your faculty or school.
Distinction	75 - 84	Awarded when you demonstrate the learning outcomes for the unit at a very high standard, as defined by grade descriptors or exemplars outlined by your faculty or school.
Credit	65 - 74	Awarded when you demonstrate the learning outcomes for the unit at a good standard, as defined by grade descriptors or exemplars outlined by your faculty or school.
Pass	50 - 64	Awarded when you demonstrate the learning outcomes for the unit at an acceptable standard, as defined by grade descriptors or exemplars outlined by your faculty or school.
Fail	0 - 49	When you don’t meet the learning outcomes of the unit to a satisfactory standard.

For more information see sydney.edu.au/students/guide-to-grades.

For more information see guide to grades.

Use of generative artificial intelligence (AI)

You can use generative AI tools for open assessments. Restrictions on AI use apply to secure, supervised assessments used to confirm if students have met specific learning outcomes.

Refer to the assessment table above to see if AI is allowed, for assessments in this unit and check Canvas for full instructions on assessment tasks and AI use.

If you use AI, you must always acknowledge it. Misusing AI may lead to a breach of the Academic Integrity Policy.

Visit the Current Students website for more information on AI in assessments, including details on how to acknowledge its use.

Late submission

In accordance with University policy, these penalties apply when written work is submitted after 11:59pm on the due date:

Deduction of 5% of the maximum mark for each calendar day after the due date.
After ten calendar days late, a mark of zero will be awarded.

Academic integrity

The University expects students to act ethically and honestly and will treat all allegations of academic integrity breaches seriously.

Our website provides information on academic integrity and the resources available to all students. This includes advice on how to avoid common breaches of academic integrity. Ensure that you have completed the Academic Honesty Education Module (AHEM) which is mandatory for all commencing coursework students

Penalties for serious breaches can significantly impact your studies and your career after graduation. It is important that you speak with your unit coordinator if you need help with completing assessments.

Visit the Current Students website for more information on AI in assessments, including details on how to acknowledge its use.

Learning support

Simple extensions

If you encounter a problem submitting your work on time, you may be able to apply for an extension of five calendar days through a simple extension.  The application process will be different depending on the type of assessment and extensions cannot be granted for some assessment types like exams.

Special consideration

If exceptional circumstances mean you can’t complete an assessment, you need consideration for a longer period of time, or if you have essential commitments which impact your performance in an assessment, you may be eligible for special consideration or special arrangements.

Special consideration applications will not be affected by a simple extension application.

Using AI responsibly

Co-created with students, AI in Education includes lots of helpful examples of how students use generative AI tools to support their learning. It explains how generative AI works, the different tools available and how to use them responsibly and productively.

Support for students

The Support for Students Policy reflects the University’s commitment to supporting students in their academic journey and making the University safe for students. It is important that you read and understand this policy so that you are familiar with the range of support services available to you and understand how to engage with them.

The University uses email as its primary source of communication with students who need support under the Support for Students Policy. Make sure you check your University email regularly and respond to any communications received from the University.

Learning resources and detailed information about weekly assessment and learning activities can be accessed via Canvas. It is essential that you visit your unit of study Canvas site to ensure you are up to date with all of your tasks.

If you are having difficulties completing your studies, or are feeling unsure about your progress, we are here to help. You can access the support services offered by the University at any time:

Support and Services (including health and wellbeing services, financial support and learning support)
Course planning and administration
Meet with an Academic Adviser

Weekly schedule

WK	Topic	Learning activity	Learning outcomes
Ongoing	Research plan, literature review and research design for an original thesis	Independent study (116 hr)
Ongoing	Meetings with Supervisor	One-to-one tuition (6 hr)

Attendance and class requirements

As per the Faculty of Engineering Coursework Awards Resolutions, students are expected to attend and actively engage in all timetabled activities of their respective units of study.

For this unit of study, students are expected to attend a minimum of 85 percent of timetabled activities. Exceptions to this requirement may be granted only by the Dean or the Head of School.

Failure to meet the minimum attendance requirement may result in a fail grade.

Heads of School, Program Directors and / or Unit of Study Coordinators may set additional assessment items where the attendance requirement differs from 85 percent.

Workshop Participation:

Students are required to engage in a professional manner during workshops. This includes being fully prepared by thoroughly reviewing and engaging with all materials provided by the Unit of Study Coordinator and / or teaching team prior to the workshop where applicable. Active participation in class activities, discussions, and team-based tasks is expected to ensure meaningful contributions and effective collaboration.

Students participating in learning activities, including workshops conducted remotely or online, are strongly encouraged to have their cameras turned on for the duration of the session. Failure to comply may result in a request to show cause. Continued non-compliance may be deemed as non-participation, which could impact assessment outcomes.

Study commitment

Typically, there is a minimum expectation of 1.5-2 hours of student effort per week per credit point for units of study offered over a full semester. For a 6 credit point unit, this equates to roughly 120-150 hours of student effort in total.

Required readings

Selected readings may be provided for critical review and to guide student research.

Learning outcomes

Learning outcomes are what students know, understand and are able to do on completion of a unit of study. They are aligned with the University's graduate qualities and are assessed as part of the curriculum.

Outcomes
Graduate qualities

At the completion of this unit, you should be able to:

LO1. Drive a research project and take ownership in its articulation, design, planning, execution and documentation.
LO2. Conduct a critcal review of literature relevant to a chosen topic with focus on identifying key themes, contributions, research gaps and issues.
LO3. Articulate and justify a researchable question or questions suitable for investigation.
LO4. Identify, select and justify relevant theory, research philosophy and research methods suitable for addressing a research question or problem in an academic manner.
LO5. Apply selected research method(s) with consideration of reliability and validity of results.
LO6. Draw conclusions based on raw data analysis and refine those conclusions in context based on consideration of methods and assumptions involved.
LO7. Demonstrate originality, ingenuity and initiative in dealing with critical research issues.
LO8. Document and report research work that demonstrates a clear line of argument and follows a format appropriate for academic literature.
LO9. Demonstrate ability to disseminate research work accurately, informatively and constructively to both academic and non-academic audiences in a professional manner.

Graduate qualities

The graduate qualities are the qualities and skills that all University of Sydney graduates must demonstrate on successful completion of an award course. As a future Sydney graduate, the set of qualities have been designed to equip you for the contemporary world.

GQ1	Depth of disciplinary expertise Deep disciplinary expertise is the ability to integrate and rigorously apply knowledge, understanding and skills of a recognised discipline defined by scholarly activity, as well as familiarity with evolving practice of the discipline.
GQ2	Critical thinking and problem solving Critical thinking and problem solving are the questioning of ideas, evidence and assumptions in order to propose and evaluate hypotheses or alternative arguments before formulating a conclusion or a solution to an identified problem.
GQ3	Oral and written communication Effective communication, in both oral and written form, is the clear exchange of meaning in a manner that is appropriate to audience and context.
GQ4	Information and digital literacy Information and digital literacy is the ability to locate, interpret, evaluate, manage, adapt, integrate, create and convey information using appropriate resources, tools and strategies.
GQ5	Inventiveness Generating novel ideas and solutions.
GQ6	Cultural competence Cultural Competence is the ability to actively, ethically, respectfully, and successfully engage across and between cultures. In the Australian context, this includes and celebrates Aboriginal and Torres Strait Islander cultures, knowledge systems, and a mature understanding of contemporary issues.
GQ7	Interdisciplinary effectiveness Interdisciplinary effectiveness is the integration and synthesis of multiple viewpoints and practices, working effectively across disciplinary boundaries.
GQ8	Integrated professional, ethical, and personal identity An integrated professional, ethical and personal identity is understanding the interaction between one’s personal and professional selves in an ethical context.
GQ9	Influence Engaging others in a process, idea or vision.

Outcome map

Learning outcomes	Graduate qualities
Learning outcomes

Responding to student feedback

This section outlines changes made to this unit following staff and student reviews.

We are maintaining the program as it has previously been highly effective.

Additional information

Research Supervision:

Once a topic has been assigned/ agreed upon, students will conduct their research under the direction of their faculty supervisor, with the unit academic lead providing occasional oversight.

Requests for References:

Unit of Study Coordinators and the teaching team for this unit are not obligated to, and typically will not, provide personal references for students.

Students requiring a letter of good standing should direct their request to the Student Centre as the first point of contact.

Work, health and safety

We are governed by the Work Health and Safety Act 2011, Work Health and Safety Regulation 2011 and Codes of Practice.

Everyone has a responsibility for health and safety at work. The University’s Work Health and Safety policy explains the responsibilities and expectations of workers and others, and the procedures for managing WHS risks associated with University activities.

Disclaimer

Important: the University of Sydney regularly reviews units of study and reserves the right to change the units of study available annually. To stay up to date on available study options, including unit of study details and availability, refer to the relevant handbook.

To help you understand common terms that we use at the University, we offer an online glossary.

Current students

Overview

Overview

Unit details and rules

Teaching staff

Assessment

Assessment

Assessment summary

Assessment criteria

Use of generative artificial intelligence (AI)

Late submission

Academic integrity

Learning support

Learning support

Simple extensions

Special consideration

Using AI responsibly

Support for students

Weekly schedule

Weekly schedule

Attendance and class requirements

Study commitment

Required readings

Learning outcomes

Learning outcomes

Graduate qualities

Outcome map

Responding to student feedback

Responding to student feedback

Additional information

Additional information

Work, health and safety

Disclaimer

On this page

Useful links

PMGT5883: Project Studies Thesis A

Semester 2, 2025 [Online] - Camperdown/Darlington, Sydney

Overview

Overview

Unit details and rules

Teaching staff

Assessment

Assessment

Assessment summary

Assessment criteria

Use of generative artificial intelligence (AI)

Late submission

Academic integrity

Learning support

Learning support

Simple extensions

Special consideration

Using AI responsibly

Support for students

Weekly schedule

Weekly schedule

Attendance and class requirements

Study commitment

Required readings

Learning outcomes

Learning outcomes

Graduate qualities

Outcome map

Responding to student feedback

Responding to student feedback

Additional information

Additional information

Work, health and safety

Disclaimer

On this page

Useful links